Supporting our sponsors helps us continue to make free content for you guys. The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/brothersmake03221. Big thanks to Skillshare for sponsoring this video! 🤙🏽
You are using a knife edge when scraping after the saw trimming. This doesn't work well because the blade edge tends to cut in. A better tool is one with a 90deg edge. This has a flat surface that rides over the "good" plastic preventing digging in. The tool could be up to 1/8" thick but thinner also works well. I like to use an X-Acto knife. However, I use the back edge instead of "sharp" edge. Works like magic. Wood workers have a similar tool called a "Card Scraper". redrok
You know, this seems like an easy way to make DIY plant pots for those of us who don't have the mold you two used. I may well try this out myself. Thanks a load.
I really appreciate that you guys are willing to try new things and to make some mistakes and share those mistakes! It's so helpful for people who are just starting out. I hope more people get into crafting with recycled plastic.
I've just discovered this channel and have been binge-watching it all evening. You guys are amazing! I love your personalities, and the things you make WHILE saving the planet are incredible! I wish I had the tools (and the physical ability) to make things like you do. I've made little wallets and other small items out of plastic bags from the grocery by ironing them into a "fabric", but that's about it. I also cut plastic bags into strips and crochet with them. Thank you so much for all that you do!!!
Next time you should try freezing the bouls before you start the mold process. Plastic has to have help cooling down. Most injection modes have a water system. Plastic tends to warp when it cools down. But if you emerge it in water immediately after molded It takes its form immediately.
Ideas for more HDPE projects to try: . Stringable Beads (Round, hollow and shapes) . Walking Cane Handles . Drawer Knobs . Tiles for a Back Splash (especially how to install with adhesives) . Kids Toys . Frisbee . Bath time kids toys (like floating ducks and little boats)
Really great ideas! We actually have drawer knobs and beads coming onto our online shop in a month or two. We currently sell mini frisbees also :) Love the other ideas too! www.brothersmake.com/shop
I was just thinking about this while bagging up grocery and other shopping bags. The melting point of polyethylene is around 114 to 128 C but I do remember making similar projects in the 1990's around 145 to 155 C which made the material far too sticky for practical consideration of future prospects as an artist and now also engineer. Tomorrow, I will try a marble/Damascus knife or short sword using our shopping bags. I expect delamination but love learning from my failures. I also intend to make beads and maybe even shoes and boots. Thank you for doing some of the maths for me/us, it cuts my/our time down. Best of wishes to you and yours.
fill the inside bowl with concrete and make a wood frame for the outside bowl and fill the outside around with concrete ,place a couple spacers for the press that the press cant go deeper and you have a strong mould and always the same wall thickness
Bowls are great for storage, but boxes would provide a more efficient and safe storage solution, especially with the use of hinges and latches for locks. Maybe with a semi-clear top so one can see the contents.
You know, it does look a bit like molten hard candy. I wonder if any tools or skills of that trade might prove useful or at least interesting for future projects.
Dealing with plastics, molds, pressing and vacuum forms it helps with detail to warm the mold or item you're using. Plastic cool and harden very quickly when they come in contact with a cooler surface
Great that you’re back and the new studio looks ace! Do miss the jump to camera ‘let’s make a…’. Look forward to what you can now make in the new space
Greetings from Turkey. Recycled plastic may not be suitable for food contact. Make sure the plastic you recycle is 100% clean. Have a great day. #precious_plastic_turkey
I really wouldn't be to worried about food contact if you collect your plastic yourself. Just don't use motoroil cans and stuff like that. Our food is touched by hdpe all the time and most of it comes from food packaging anyway. And from shampoo bottles etc. Also not really toxic. Just wash it properly before and once it is done and don't use plastic that had toxic stuff in it and personally i would have no issues eating from such a bowl.
I'm imagining a Bespoke HDPE Plastics buffet, where there are shavings of various colours to choose from so you can make your own mix from what's currently available, and then you bring it to the end, and pick from one of four or so simple items (plectrum, coaster, clipboard, tumbler/bowl sorta things), and then it's melted and extruded into your shape for you. That would be so nifty as a step-by-step makerspace sort of experience, and give folks who'd never get up the motivation to do it on their own an opportunity to do what you fellas are doing!
As for additional ideas for things to make-- what about taller tumblers, perhaps ones that would fit in your drinks holder? I've steel tumblers, I'd imagine those would make good moulds.
I absolutely adore this idea! These would perhaps be great items to make in different sizes and color schemes to donate to local pet shelters or as part of pet adoption gift bags. My biggest question then is where to source the needed (used) HDPE lids? It would take our small household decades to collect enough for a handful of small bowls.
The Plastic is so Easily obtained ! From The ! S.m s !.I've THROWN ! that much ! Of it ! Away ! Over the years !! That l didn't think !. Could ever be Recycled ! For Better Use ! !
OR to donate to homeless ppl . Make it with a tab for a strap to go through so the person could hook it to their belt or cart or whatever. Also, LOOKon the ground. SO MANY PLASTIC BOTTLES BEING THROWN OUT OF CARD PASSING BY. USE their discarded waste. Go to beaches after Spring break. You will have so many bottle cap you wnon't know what to do with them all!
now that was very nice AND useful at the same time, also of course you guys whatever you had made so far is for homes and useful at the same time, i really like how people around the world including you guys have find ways to use trash and make stuff out of them instead of throw them and end up to landfills and god knows what will happen to them and how will the compose, i mean especially plastic can last 500 years imagine making a house out of it, anyways wonderful video as always and it also helps me with a project about a video game im making.
Thank you so much for your useful videos! I was wondering if I can do this with other types of plastic, for example plastic wraps and packaging that are unlabeled so Idk what material that is? For me they are most easy to collect as unfortunately they can be found everywhere and all you can do is dispose or reuse them for little amount of times
I've tried to use some bowls before to make climbing holds, mine were just a bit inconsistent and a bit flimsy on the bigger ones.. Climbing holds can be super expensive and also use virgin plastics, so if you guys could come up with easy ways to make strong holds using household items, I'm sure there would be many many people who would thank you! XD
Combat extra in training here. I'd love to see if you can make some "combat armour", kinda like riot gear, I guess. Forming the outer layer (to later line with softer padding). The idea itself is proving challenging just in my head, so I'm sure it'll give you guys a nice challenge 😁
Wow, that's great. I wanted to build wheels for my TV table. The reality is often we don't know where to get these thinks outside of really great imports. Great video.
Cool idea, have you ever thought of trying plastic gnomes for the garden? I don't know how well plastic would release from gnome moulds but I'm gong to try some of my e-waste ones soon. Are there any products you guys can melt that give you the clear plastic easily that us lay folk can try lol!? I much prefer the idea of using clear recycled plastic than resin that's for sure, suits the recycling ethos much better! ! Nice video!
I think if you made car bumbers, they would outlast all the chipped up and cracked ones on every new car. Hemp plastic would be best. I like the imperfections in projects. Good job guys!
I was thinking about you guys the other day as I was trying to fix a cracked HDPE water butt because it took me ages to find a bit of plastic around the house that would be compatible. As it turns out it ended up being a bottle cap, just like what you guys use in your projects. Makes me wonder if HDPE is found in other common every day products because I've seen plenty of PP and LDPE but not so much the type 2...
Common items made of HDPE: Milk bottles and caps. Margarine and butter containers. Some juice bottles. Some detergent bottles. There is a triangular recycling stamp embossed into the bottom of plastic products with either the number or the type of plastic. Check for a number 2. Avoid using other types of plastic because they can release toxic gases when heated. Some kinds of plastic contain BPA and other carcinogens.
I haven't been getting notifications of all your videos and so I've not been around much since the beginning. I loved your presentation style then, and maybe Skillshare has helped you, but you always looked good to me! I don't recall your 'bad' clip... I think you made that up 🤭 Love the green bowl. That's do-able for newbies I think.
People further down in the comments are saying it's a Teflon baking sheet. I'm going to try one because my experience with parchment paper has not been very good.
@@opie32958 for the win! I’m a little baffled they wouldn’t mention this crucial step, to be honest… Getting sick of these quasi elusively “helpful” ukulele-background-music videos
When you are melting the caps, how long do you have them in the press? You mentioned how long to leave them to cool but I was wondering how long before you take them out and twist them?
Yes, please. More information. Wattage of🔥press_______ Silicon pads info_________🔥resilstant gloves_______ 🔥press how many x's____ How long🔥press🥇______ How long🔥press🥈______ How long🔥press🥉______ Weight on🔥press________ Thickness matter🔥press___ Sheet to mold thickness ___
I know you did coasters before but could you use a cookie cutter while it is still pliable to make them without needing to cut them down (a thought i had when you asked about other molds)
Several friends and I collect our household plastics and send them off to TerraCycle. I look forward to the day when household plastics, food wraps and such, are easily collected like glass to be made into garden pots and such. Nothing available in my area that I know off.
the bowl could afterwards be processed like doing a woodturning (we germans have a specific word or woodturning: das Drechseln. So it is not necessarily only wood you process this way)
You tell me it's simple, it's incredible that you can make 1 plastic tub using a lot of machines that few people have the opportunity to invest in. The hourly wages are gigantic.
Supporting our sponsors helps us continue to make free content for you guys. The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/brothersmake03221. Big thanks to Skillshare for sponsoring this video! 🤙🏽
Don't think it's good idea to use in something food related.
Better in building.
But anyway your project is very good guide for people, thanks!
You are using a knife edge when scraping after the saw trimming.
This doesn't work well because the blade edge tends to cut in.
A better tool is one with a 90deg edge. This has a flat surface that rides over the "good" plastic preventing digging in.
The tool could be up to 1/8" thick but thinner also works well.
I like to use an X-Acto knife. However, I use the back edge instead of "sharp" edge.
Works like magic.
Wood workers have a similar tool called a "Card Scraper".
redrok
what is your measurement for your blank mold??
What material is black cloth made of?
@@petbottlesilicon
You know, this seems like an easy way to make DIY plant pots for those of us who don't have the mold you two used. I may well try this out myself. Thanks a load.
Cheer
I really appreciate that you guys are willing to try new things and to make some mistakes and share those mistakes! It's so helpful for people who are just starting out. I hope more people get into crafting with recycled plastic.
I've just discovered this channel and have been binge-watching it all evening. You guys are amazing! I love your personalities, and the things you make WHILE saving the planet are incredible! I wish I had the tools (and the physical ability) to make things like you do. I've made little wallets and other small items out of plastic bags from the grocery by ironing them into a "fabric", but that's about it. I also cut plastic bags into strips and crochet with them. Thank you so much for all that you do!!!
Same lol. I'm getting into making custom controllers and was looking for fun material to work with and I'm sure this is gonna be fruitful for me
Next time you should try freezing the bouls before you start the mold process. Plastic has to have help cooling down. Most injection modes have a water system. Plastic tends to warp when it cools down. But if you emerge it in water immediately after molded It takes its form immediately.
Not exactly. Just makes warp faster
Valeu pela dica!!!!
Ideas for more HDPE projects to try:
. Stringable Beads (Round, hollow and shapes)
. Walking Cane Handles
. Drawer Knobs
. Tiles for a Back Splash (especially how to install with adhesives)
. Kids Toys
. Frisbee
. Bath time kids toys (like floating ducks and little boats)
Yes I would like to see some of these !good idea ! Thankyou
Really great ideas!
We actually have drawer knobs and beads coming onto our online shop in a month or two. We currently sell mini frisbees also :) Love the other ideas too!
www.brothersmake.com/shop
These are great ideas ! I'd love a cane made like the green bowl. It would look great !
I'll propose something ambitious: what about a drum kit?
@@shonevarz6540 Speaking of instruments, what about instument cases?
This simply beats the pots video you made about 11 months ago. This means us laymen can now start to recycle. I'm trying this out !!! Thanks bros.
Mother Earth needs more people than you☝️😊 Great Ideas and I have a lot of fun watching your Videos😁 Greetings from Bavaria😘💞
Hey man, Mother Earth wanted plastic but couldn't make it herself, so she first made humans to make it for her.
You just have us a job
Thanks guys ❤️❤️❤️❤️from Ghana northern Region Dagbon Kingdom west Africa Tamale ..
I was just thinking about this while bagging up grocery and other shopping bags. The melting point of polyethylene is around 114 to 128 C but I do remember making similar projects in the 1990's around 145 to 155 C which made the material far too sticky for practical consideration of future prospects as an artist and now also engineer. Tomorrow, I will try a marble/Damascus knife or short sword using our shopping bags. I expect delamination but love learning from my failures. I also intend to make beads and maybe even shoes and boots. Thank you for doing some of the maths for me/us, it cuts my/our time down. Best of wishes to you and yours.
Subscribed, forgot to mention. Also, thank you again.
This sounds awesome man, let us know how you get on! Best of luck ♻️
I've been collecting caps and thought I'd start with a keyring but those plant pots you have look amazing! I'm gonna need more caps!
You guys should try doing this for flower pots. I've been trying to figure it out for months
fill the inside bowl with concrete and make a wood frame for the outside bowl and fill the outside around with concrete ,place a couple spacers for the press that the press cant go deeper and you have a strong mould and always the same wall thickness
Bowls are great for storage, but boxes would provide a more efficient and safe storage solution, especially with the use of hinges and latches for locks. Maybe with a semi-clear top so one can see the contents.
I love that idea!
Guys, you are the GOAT. It's really cool what are you doing!
You know, it does look a bit like molten hard candy. I wonder if any tools or skills of that trade might prove useful or at least interesting for future projects.
Like a drop candy roller. Or maybe try to folding plastic like those artistan hard candy from Japan "Kintaro-ame"
Dealing with plastics, molds, pressing and vacuum forms it helps with detail to warm the mold or item you're using. Plastic cool and harden very quickly when they come in contact with a cooler surface
You know, you guys are the real brothers......double thumbs up👍
Thanks! 👍🏽👍🏽
Great that you’re back and the new studio looks ace! Do miss the jump to camera ‘let’s make a…’. Look forward to what you can now make in the new space
Happy to see you guys back!
Dang!! I want to make one of those so badly now. Just for the morning cereals! Great project and video bros. Cheers!
You definitely should!!
Greetings from Turkey. Recycled plastic may not be suitable for food contact. Make sure the plastic you recycle is 100% clean. Have a great day. #precious_plastic_turkey
You definitely should not use for food unless you don't care about food/health safety or are absolutely sure it's safe.
I really wouldn't be to worried about food contact if you collect your plastic yourself. Just don't use motoroil cans and stuff like that.
Our food is touched by hdpe all the time and most of it comes from food packaging anyway. And from shampoo bottles etc. Also not really toxic.
Just wash it properly before and once it is done and don't use plastic that had toxic stuff in it and personally i would have no issues eating from such a bowl.
If you are using milk bottle caps or other plastic that was previously used with food, it would be alright.
I'm imagining a Bespoke HDPE Plastics buffet, where there are shavings of various colours to choose from so you can make your own mix from what's currently available, and then you bring it to the end, and pick from one of four or so simple items (plectrum, coaster, clipboard, tumbler/bowl sorta things), and then it's melted and extruded into your shape for you. That would be so nifty as a step-by-step makerspace sort of experience, and give folks who'd never get up the motivation to do it on their own an opportunity to do what you fellas are doing!
As for additional ideas for things to make-- what about taller tumblers, perhaps ones that would fit in your drinks holder? I've steel tumblers, I'd imagine those would make good moulds.
We have plans to open up our workshop to education groups and do something almost exactly like this! Fabulous ideas 😁😁
The green one is really beautiful, it looks like malachite or however its written
Could you make your own storage bins?
I love seeing items in your shop that you made yourself
ive been thinking about doing this too, a thick-ish crate for records, or books would be great.
Ive deen ur stuff b4. Im glad this one came up when i was googling alternative bowl mold, cheap bowl mold im finding stuff well over $1000
The ball looked amazing in the slow motion 😊
Because you show us that you tried an till you got it perfect.....I will follow an share your channel....
I absolutely adore this idea! These would perhaps be great items to make in different sizes and color schemes to donate to local pet shelters or as part of pet adoption gift bags. My biggest question then is where to source the needed (used) HDPE lids? It would take our small household decades to collect enough for a handful of small bowls.
Speak to friends and the neighbours you know well enough. I'm sure most people would be happy to save you all their bottle lids.
The Plastic is so Easily obtained ! From The ! S.m s !.I've THROWN ! that much ! Of it ! Away ! Over the years !! That l didn't think !. Could ever be Recycled ! For Better Use ! !
OR to donate to homeless ppl . Make it with a tab for a strap to go through so the person could hook it to their belt or cart or whatever.
Also, LOOKon the ground. SO MANY PLASTIC BOTTLES BEING THROWN OUT OF CARD PASSING BY. USE their discarded waste. Go to beaches after Spring break. You will have so many bottle cap you wnon't know what to do with them all!
Just made my first set of coasters ❤
Beautiful. Thank you for sharing. Hope to try it out someday. (Hope soon). Blessings and greetings from
🇨🇼Curaçao 🇨🇼
Amazing work, great brothers
Your videos are always fun & interesting. This bowl looks like one of those little party hats people wear for St. Patrick's day celebrations.
Thanks so much! Haha it does now you mention it - we'll be sure to use it this St Patrick's day!
Song choices phenomenal fellas
now that was very nice AND useful at the same time,
also of course you guys whatever you had made so far is for homes and useful at the same time,
i really like how people around the world including you guys have find ways to use trash and make stuff out of them instead of throw them and end up to landfills and god knows what will happen to them and how will the compose, i mean especially plastic can last 500 years imagine making a house out of it,
anyways wonderful video as always and it also helps me with a project about a video game im making.
Wow the first time i see melting plastic,it looks great ,i subscribed,liked and hit the bell button ,good luck from Canada.
I'm glade you guys made this video. Thank you
Glad
you guys make it a lot of simple, great job and nice video!
Thanks Daffa!
Love that beautiful bowl you made
Love you guys, great job 👏👏👏
Love this. Need to start keeping plastic caps from all of our litter projects to be able make these.
Az
D z
Love this! going to try it out tomorrow
Bloody brilliant!
😘
Truly cool ,great upcycle idea.
Heck yeah
Nice job Bros.
Very cool my friend! We filmed a plastic documentary in Mexico and saw a similar process in action… was amazing!
Thank you for this beautiful video
This project is very good!
Definitely gonna give this a go. 👍
I really love what you guys please I’ll like to see more on your page ❤
Paella pan / wok, to make large dishes or even a shield
Would love to see what you guys could do at making a diy hydrophonic garden using plastic bottles.
Nice work Chaps 👍🏻
I am from India and I like your recycling
Thank you so much for your useful videos! I was wondering if I can do this with other types of plastic, for example plastic wraps and packaging that are unlabeled so Idk what material that is? For me they are most easy to collect as unfortunately they can be found everywhere and all you can do is dispose or reuse them for little amount of times
Wow, that is interesting! Now a new subscriber
I wish if someone can help start such business ... this is really a good idea .. bless you
I've tried to use some bowls before to make climbing holds, mine were just a bit inconsistent and a bit flimsy on the bigger ones.. Climbing holds can be super expensive and also use virgin plastics, so if you guys could come up with easy ways to make strong holds using household items, I'm sure there would be many many people who would thank you! XD
Thanks for the great videos!!!
You’re welcome! Thanks for watching
Hi guys , you are making a wonderful job . I"m very interesting In recycling l live in Namibia
отличная идея, так можно горшки для цветов делать)
I really like this project, i also a kind of person with such skill for doing many experiment but only luck a support and materials
With all that you guys can do. I was wondering if you can use clear plastic bottles to make window panes ? Might sound dumb but Hey why not.
This is the great job
Combat extra in training here. I'd love to see if you can make some "combat armour", kinda like riot gear, I guess. Forming the outer layer (to later line with softer padding). The idea itself is proving challenging just in my head, so I'm sure it'll give you guys a nice challenge 😁
Nặng lắm . Không chịu nổi đâu . Mỏng nhẹ thì không có tác dụng
I don't think they're the type of people who like making things used for crowd control...
Have you guys tried using an air fryer for melting plastic? I'm curious if that would work.
This is amazing! Thanks
Nice job 🤝
Wow, that's great. I wanted to build wheels for my TV table. The reality is often we don't know where to get these thinks outside of really great imports. Great video.
Excellent excellent excellent
Lovely,thanks
Thanks bros...👍❤️🤛👊🍻
Impressive !
Cool idea, have you ever thought of trying plastic gnomes for the garden? I don't know how well plastic would release from gnome moulds but I'm gong to try some of my e-waste ones soon. Are there any products you guys can melt that give you the clear plastic easily that us lay folk can try lol!? I much prefer the idea of using clear recycled plastic than resin that's for sure, suits the recycling ethos much better! ! Nice video!
I think if you made car bumbers, they would outlast all the chipped up and cracked ones on every new car. Hemp plastic would be best. I like the imperfections in projects. Good job guys!
I was thinking about you guys the other day as I was trying to fix a cracked HDPE water butt because it took me ages to find a bit of plastic around the house that would be compatible. As it turns out it ended up being a bottle cap, just like what you guys use in your projects. Makes me wonder if HDPE is found in other common every day products because I've seen plenty of PP and LDPE but not so much the type 2...
Types 4 and 5 (LDPE, PP) are just as good to use, the only difference to consider is the melting point.
Common items made of HDPE: Milk bottles and caps. Margarine and butter containers. Some juice bottles. Some detergent bottles.
There is a triangular recycling stamp embossed into the bottom of plastic products with either the number or the type of plastic. Check for a number 2.
Avoid using other types of plastic because they can release toxic gases when heated. Some kinds of plastic contain BPA and other carcinogens.
I haven't been getting notifications of all your videos and so I've not been around much since the beginning. I loved your presentation style then, and maybe Skillshare has helped you, but you always looked good to me! I don't recall your 'bad' clip... I think you made that up 🤭 Love the green bowl. That's do-able for newbies I think.
Silly question maybe but what are the sheets between the breville & the caps?
No it's not a silly question - I want to know too!
People further down in the comments are saying it's a Teflon baking sheet. I'm going to try one because my experience with parchment paper has not been very good.
@@opie32958 for the win! I’m a little baffled they wouldn’t mention this crucial step, to be honest… Getting sick of these quasi elusively “helpful” ukulele-background-music videos
@@lilyolk299 I wonder what kind of background music they use for videos about how to play the ukulele.
@@opie32958 😅
When you are melting the caps, how long do you have them in the press? You mentioned how long to leave them to cool but I was wondering how long before you take them out and twist them?
Yes, please. More information.
Wattage of🔥press_______
Silicon pads info_________🔥resilstant gloves_______
🔥press how many x's____
How long🔥press🥇______
How long🔥press🥈______
How long🔥press🥉______
Weight on🔥press________
Thickness matter🔥press___
Sheet to mold thickness ___
I know you did coasters before but could you use a cookie cutter while it is still pliable to make them without needing to cut them down (a thought i had when you asked about other molds)
Bravo les gars
Wow!
New Subscriber here. Thanks for this video. I really enjoyed it.
Thanks! Great to have you 👍🏼
Several friends and I collect our household plastics and send them off to TerraCycle.
I look forward to the day when household plastics, food wraps and such, are easily collected like glass to be made into garden pots and such.
Nothing available in my area that I know off.
Could you make a plastic swords 🗡 and shields 🛡 spears and bow and Arrow 🏹 for kids toys? So they I want to learn if it works.
Impressive... top notch
Thanks!
You could use a deburring tool to clean up the edges easier
Or once the bowl is completely cooled, why not use a router to tidy up the edge? Just a thought.
Wow amazing
the bowl could afterwards be processed like doing a woodturning (we germans have a specific word or woodturning: das Drechseln.
So it is not necessarily only wood you process this way)
We did this for another video where we made a small plate using a lathe
Félicitations les brothers
You tell me it's simple, it's incredible that you can make 1 plastic tub using a lot of machines that few people have the opportunity to invest in. The hourly wages are gigantic.
Nice Recycle~
This is cool
What I'd like to see is a method to make molds for arbitrary items/parts, e.g. how to create a mold for a screw or gear or screwdriver bit, etc.
I’m curious if a DIY solar oven would work on the melting portion for part of the year? Any thoughts?
@brothersmake do you guys have a book or pdf that details what plastics and tools you use? And can you use any other plastics beside the bottle caps?
You should make 14 and 18 inch plant saucers.
Thank you.
Wonderful
Hello whats the name of black sheet is that?