Did you have to change any wires (brake line, clutch, etc.) when you installed the bars? I don't know if my 11' 48's brake line is long enough. And, do you have your wires ran internally?
+ham72502 Hey mate no i didn't have change any of the stock lines although the brake cable is very snug and i would recommend lengthening that i will at some stage soon. And yes the wires are internal.
on my 16, all lines were long enough - minus the brake line. Which, would have been just long enough if you ran it straight from master to caliper. I did replace them with longer line for the safety's sake as I thought line may be stretched too much when front suspension is on rebound.I ran both of my electrical wires inside of my bar. i was able to run clutch side electrical wires inside without cutting anything(disconnect it under the tank first), but i had to cut the wires, ran it inside, then reconnect it afterword's.When you look under the tank, they looped up enough wires to accommodate some mini apes(for mini ape on SeventyTwo, i presume)
I have a 48 with basic bar. and I am going to change to the bar like your HD (Chizeled Lo Handlebar), is it much easier to ride with long tour? I am only 1m67 tall. Please help me.
I know this is different for every person but in your opinion how much more comfortable of a ride is this bike with the Z bars ? I am thinking about changing my stock bars to these on my 2016 Harley 48
They only end up being an inch or so higher than stock bars but it made a different they were much more comfortable.. I have since gone to 14 inch apes though..
Finally an awesome video of riding with an awesome soundtrack to boot 👏🏽
hello will nice vid! is ABS model?
are u using the stock brake line & clutch line for those bars? Also what inch are those z bars?
love them but the 3"5 pullback feels a bit weird at first
Did you have to change any wires (brake line, clutch, etc.) when you installed the bars? I don't know if my 11' 48's brake line is long enough. And, do you have your wires ran internally?
+ham72502 Hey mate no i didn't have change any of the stock lines although the brake cable is very snug and i would recommend lengthening that i will at some stage soon. And yes the wires are internal.
on my 16, all lines were long enough - minus the brake line. Which, would have been just long enough if you ran it straight from master to caliper. I did replace them with longer line for the safety's sake as I thought line may be stretched too much when front suspension is on rebound.I ran both of my electrical wires inside of my bar. i was able to run clutch side electrical wires inside without cutting anything(disconnect it under the tank first), but i had to cut the wires, ran it inside, then reconnect it afterword's.When you look under the tank, they looped up enough wires to accommodate some mini apes(for mini ape on SeventyTwo, i presume)
Doesn't your back hurt with the bars so far forward and those forward controls?
I have a 48 with basic bar. and I am going to change to the bar like your HD (Chizeled Lo Handlebar), is it much easier to ride with long tour? I am only 1m67 tall. Please help me.
What model and inch are these bars? Thanks
I know this is different for every person but in your opinion how much more comfortable of a ride is this bike with the Z bars ? I am thinking about changing my stock bars to these on my 2016 Harley 48
They only end up being an inch or so higher than stock bars but it made a different they were much more comfortable.. I have since gone to 14 inch apes though..
What size rise?
What size z bar is it ?