I've always wanted to learn how to sharpen on stones but I know deep down that I will never be able to develop the proper technique and muscle memory. I bought this system and just appreciate having sharp knives now.
I cannot thank you enough! I was about to pull the trigger on a tube of high dollar adhesive, 2000 grit sand paper, all kinds of goodies to get my elite to perform at a level I would be satisfied with. I ran across your video. Watched it in its entirety, spent about an hour using your technique (2 blades) and now my knife is scary sharp with a mirror finish!! I almost can't believe it. Just goes to show even with the right tool if the technique is flawed you will never get the desired results. Thank you SO much for all of the research and work that went into this video! I am happy happy happy now!!!
Wow thank you so much for this amazing comment and all of the insight you gave on your experience. I'm so glad that it was helpful for you and that you were able to get the outcome you wanted. Thanks again, and happy sharpening!!
After watching a few videos I felt as though I was 75% there. After spending a ridiculous amount of time with a poor ROI with other YT channels, it was yours and this video in particular that brought it all home. Awesome work. Great video.
Wow thank you so much for that amazing comment it means a lot and I really appreciate it. I'm really really glad that you were able to bring it all together and get your knives to the place you want :)
This video needs to be what worksharp shows people that buy their products. BRAVO on the editing and production too. I could listen to you for an hour man, that’s saying something haha! Cheers and thanks for helping me, I wish I could post a photo of the work you just helped me knock out! Going to have one happy scout!
Wow, that is such an amazing set of compliments, thank you so much! I'm so glad it was helpful :) you can use a service like imgur to post and share photos, I'd love to see what you accomplished! I'll be making an updated video soon on the new sharpening system.
I watched your video and said to myself I have never seen this technique of sharpening. So I decided to sharpen my new Vosteed Acorn knife on my worksharp Precision Adjust and it turned out perfect. I got a mirror like finish👍 thanks for posting this video
This video helped so much. I was able to get a pretty sharp edge but it wasn't consistent or mirror. Can't wait to try out these techniques. Thank you for all the work that you put into this.
I get super nice mirror edeges by taking double sided tape and cutting strips of 800-3000 grit sandpaper on a worksharp precision adjust. I start with the 320 then once i usw the 600, i start taping pieces to the ceramic side. Also using water. And 15 strokes per grit to 800. Then 20 strokes to 3000. Honestly surprised myself with the results. Your technique has also brought some things to my attention that may help in a few areas. Awesome video. Thank you.
@@samzayas3377 thank you so much, and that's awesome!! I'm definitely really sad they don't go to a higher grit, but the taping sanding paper is an awesome work around. Love it!
Based on the blade shape how difficult you think it would be to sharpen a zt 0462? This is probably my hardest knife to sharpen and also my baby I have been torn on buying this sharpener for a while and have been watching countless videos. Best video I have ever seen on this I really encourage you to make more videos. Absolutely phenomenal
Dude...very nice edges. Hat tip to you man! I have the Professional Precision Adjust and it's the same crazy sharpness mirror finish results using just what came in the box, it's such a great sharpening system and so first time friendly too. I'm always looking to improve my skill and results, and your video is an excellent tutorial that I really enjoyed watching. You explain things in a very easy to understand way and I learned a lot today, especially regarding stroke technique, thank you! I ordered the ceramic honing panels and a lapping film sheet set to make a custom 7 panel lapping film kit for the Worksharp to push the edge sharpness and mirror finish even further. Again, great video and great edges.
@@davidsapir9638 hey, thank you so much!! I'm really glad you found it useful and that you got some new insight, I appreciate your compliments a lot! That's awesome about the lapping film and ceramic, I forgot to mention that as an option, I bet you'll get great results. Thanks again for the comment, happy sharpening!
UPDATE 2 - The new an improved Worksharp Pro Precision Adjust is out, and it's INCREDIBLE. Yes, I bought one, and yes I'll make an updated video soon. th-cam.com/video/76hvZKpGVhY/w-d-xo.html UPDATE 1 - No official higher grits coming. I've been in contact with the worksharp team and they confirmed that there are no additional accessories or grit patterns coming out for this system. I shared this video with them and they are currently reviewing it with their product team but it would be a while before anything official came out. Thank goodness there's a lot of aftermarket options; go check out NeevesKnives great video on the topic. th-cam.com/video/OXLw4B8BAek/w-d-xo.html
A mirror finish is beautiful but honestly not all knife steels cut well with a mirror great information in the video but you need the micro serration for the knife to stay working sharp so the cross hatching works as we seen for mirror and mirror only for a perdy knife. Check out neeves he has a video explaining what steels like what kind/grit edge. For example maxamet takes a mirror but so slick it’s just show I keep my maxamet pars 3 at about 400 grit and it keeps a sharp edge for so long thanks for the info in the video not judging so please don’t take it that way at all I use the same system but use a 6 inch stone holder with venev stones keep up the great videos I’m now a subscriber
@@bighamz1175 that is a great point, and something I could have made more clear in my video. That's being said, I wasn't trying to make a video like neeves made (which is great), I was trying to show how to get a mirror polish -- that's it. Then everyone can use the information however they want. Got a maxamet blade? Cool, don't put a mirror polish on it. I'm not saying every knife HAS to have a mirror polish, just that it's possible on this system and how to do it. You make a great point and if I ever make a followup I will definitely make that more clear :)
@@TheTerribleTen no sir want question you at all buddy that is a perfect video no doubt but a lot people think every steel like mirror and that don't work lol keep it up
So a year or so later, would you still recommend this system or go for the pro model? I’m just an enthusiast who likes to keep his daily carry knives sharp, but I am looking to step up from the guided field sharpener, which does a fantastic job.
Hey! Thanks for asking. After purchasing the advanced pro system, I can say it's worth it to upgrade. It adds so much great updates that make a huge difference. I'll post a new video with that system soon.
@@TheTerribleTen hey thanks for getting back to me! I’d love to see you do a video of the new pro system after using it for a while. That would be cool!
Breaking your scratch pattern with a cross hatching pattern will work for polishing better without going way up on grit. It helps break up small faceting. The problem is that you are creating a broken tooth pattern to the micro serrations. This is how to get a great paper slicing edge that will pop hair and whittle hair but it will loose it's bite incredibly quickly in use creating a slick edge with in just one or two strop backs. If you don't care about maintaining bite in the edge and just want great push cutting performance then what your doing is great. If you want to create a mirror edge without creating a slick edge then cross hatching is not gonna work well for ya. I personally can't stand a slick edge.
Those are great points thanks for bringing them up. As you mentioned the goal of this video was not to talk about edge retention or edge bite which is incredibly difficult to measure and test, this video was purely to demonstrate how to get a mirror edge without using any additional tools or techniques. That being said I do agree with your points and think it comes down to personal preference as you mentioned. I don't mind a slick edge at all especially since I usually have leather around and stropping my knife up isn't an issue for me. Thanks again for trimming in!
This is a great video! I have one of the precision adjust elite sharpers and I really like it alot. I actually quit using my Tormek T8 after I got the precision adjust. It's just easier for me to use. Have you used the Tsprof K03? I'm curious to see what your thoughts are about it compared to the precision adjust.
Thanks so much! I really appreciate the comment and I'm glad you enjoyed it 😊 I have not used the KO3, but I do know that it's basically on another level and is essentially the granddaddy of the precision adjust. It has way more capability, bigger range, more grits, so many more amazing things about it. And I would certainly hope so since it's 700 to $1,000. Thanks again for the comment and good luck sharpening
@@TheTerribleTen I have not used any Tsprof sharpeners yet either. I've been really considering purchasing the K03 since I seem to like the stone and rod type systems. Hopefully one day I will get my hands on one. Thanks again for making this video, I'm going to be using your technique for now on when I use my precision adjust.
Hi Thank you for your good video, how long does this knife sharpener usually work? And after how long should it be replaced? Second question, how can we find out what angle number to use for each type of knife, such as 15 degrees or 17 degrees or 20 degrees or 25 degrees or 30 degrees?
Hey! These "stones" can last YEARS, you shouldn't have to replace it any time soon if you take care of it. There are great websites and videos outlining what angle is best for each application. It all depends on what you're doing with it, what the steel is, etc.
I agree with 90 percent of what you’re passing along. A lot of it is known sharpening facts but I question the 5x5x5x5 2 times and then 5x5x5 x5 and then 4x4x4x4 and I’m still learning myself but it might not take every steel that long to create a burr or it might take some steels longer. And don’t you want to stop once the burr is formed and then drop down in grit and continue on the procedure? I just feel like for some blades 440. 8CR 15V you’re just going to be wasting material. Sure it’ll take years and years to really chew through your blade but i feel as for some blades it might be overkill and for some maybe not enough. Looking for your feedback! Great informational video by the way. Oh I have seen one other guy get a mirror finish with this system and a strop but he was using the saw method and it was still a bit rough.
@@Ryan.S924 thank you so much for your detailed comment, those are great points and I agree with them. There are a couple reasons I mention the strategy the way I do, but you are correct -- the most important thing is to look for a bur IF you care about sharpening less material away. 1. Most stock blades have inconsistent grinds, and require a lot of attention to rebalance. I mention this during the meaty part of the video. 2. Stopping at a bur will leave a lot of the valleys in the material, because a bur can form at micro intervals and it FEELS like it's all the way across, but in reality there are a little of microscopic areas which need leveling off. 3. Consistency. I'm trying to strike the balance between seasoned sharpeners and novices, so I laid out what I thought would be good ground rules based on my own testing for reliable mirror edges. 4. With some decent stropping you can MAINTAIN. Mirror edge, and touch it up with ceramic, so hopefully you aren't starting over 5x5 4x4 3x3 etc. I would never take a knife I've already mirrored through that process unless I beat the heck out of it. I'd probably start at 600 grit, ceramic, strop. 5. Risk vs. reward. As you mentioned, it would take a Looooong time to remove enough material from your knife to be significant, but those watching the video would probably consider that worth it in the long run since what they are here for is mirror finishes. Everything has a pro and con. That all being said, you make an excellent point and I'm glad you commented. Anyone who is concerned about removing a lot of material should take note of your thoughts and consider the points I mentioned above. Thanks again friend! Happy sharpening
Thanks so much! It's a really great beater knife, I think you're gonna like it. I didn't carry mine for a long time cuz it was so dull so often and I wasn't motivated to sharpen it. Now I am :) Enjoy your new blade!
I know I am a bit late on this but people are still commenting on the video. I'd add the recommendation to 3D print on of the available clamp support blocks for the PA/Elite.
You shouldn't use water on those diamond stones because they will start to rust out. It's an interesting video but seems like a lot of extra work. I use the work sharp precision and it works great but if I want a mirror polish I literally use 3 small leather strips with diamond paste. And the paste is like 10 bucks. But if you search 4 inch hapstone holder for work sharp you can start adding higher grits for it. Great video 👍
Thanks so much for the great comment! I didn't specifically call it out but I do dry each stone after use. I've used water on diamond stones for about 10 years now and haven't had any rust yet. Fingers crossed. Totally valid point there, that's definitely another way to get a polish. The reason for the video was to see if I could accomplish a mirror polish without any compounds, but that's definitely a way to do it. LOVE the after market components for this system, as you mention. I call those out in the extended intro. Thanks again for bringing up those great points, awesome contribution and perspective.
As child in the 60's
my Dad taught me to sharpen free hand.
Three days ago I bought this product and will use it for the remainder of my life.
I've always wanted to learn how to sharpen on stones but I know deep down that I will never be able to develop the proper technique and muscle memory. I bought this system and just appreciate having sharp knives now.
I cannot thank you enough! I was about to pull the trigger on a tube of high dollar adhesive, 2000 grit sand paper, all kinds of goodies to get my elite to perform at a level I would be satisfied with. I ran across your video. Watched it in its entirety, spent about an hour using your technique (2 blades) and now my knife is scary sharp with a mirror finish!! I almost can't believe it.
Just goes to show even with the right tool if the technique is flawed you will never get the desired results.
Thank you SO much for all of the research and work that went into this video! I am happy happy happy now!!!
Wow thank you so much for this amazing comment and all of the insight you gave on your experience. I'm so glad that it was helpful for you and that you were able to get the outcome you wanted. Thanks again, and happy sharpening!!
After watching a few videos I felt as though I was 75% there. After spending a ridiculous amount of time with a poor ROI with other YT channels, it was yours and this video in particular that brought it all home. Awesome work. Great video.
Wow thank you so much for that amazing comment it means a lot and I really appreciate it. I'm really really glad that you were able to bring it all together and get your knives to the place you want :)
Impressive! You clearly put a lot of effort into this so thanks for sharing in a comprehensive video.
@@Pg-ch5nb thank you so much! I appreciate that :)
This video needs to be what worksharp shows people that buy their products. BRAVO on the editing and production too. I could listen to you for an hour man, that’s saying something haha! Cheers and thanks for helping me, I wish I could post a photo of the work you just helped me knock out! Going to have one happy scout!
Wow, that is such an amazing set of compliments, thank you so much! I'm so glad it was helpful :) you can use a service like imgur to post and share photos, I'd love to see what you accomplished!
I'll be making an updated video soon on the new sharpening system.
This is genius and fantastically presented. Thank you, dude! Sincerely.
I watched your video and said to myself I have never seen this technique of sharpening. So I decided to sharpen my new Vosteed Acorn knife on my worksharp Precision Adjust and it turned out perfect. I got a mirror like finish👍 thanks for posting this video
@@joelleary639 wow thank you so much!! I'm so glad to hear that it worked for you And that your Acorn turned out how you wanted! Happy sharpening
This video helped so much. I was able to get a pretty sharp edge but it wasn't consistent or mirror. Can't wait to try out these techniques. Thank you for all the work that you put into this.
Thanks so much! I'm glad it helped and hope you get those mirror finishes :)
I got my first real polish! Thanks!
So glad to hear it!!!
Really good video...thank you for lots of great informations! Looking forward to trying this method
Excellent video bud, thanks for sharing.
Good tips, I can’t wait to use the new sharpener the I just acquired.
I get super nice mirror edeges by taking double sided tape and cutting strips of 800-3000 grit sandpaper on a worksharp precision adjust. I start with the 320 then once i usw the 600, i start taping pieces to the ceramic side. Also using water. And 15 strokes per grit to 800. Then 20 strokes to 3000. Honestly surprised myself with the results. Your technique has also brought some things to my attention that may help in a few areas. Awesome video. Thank you.
@@samzayas3377 thank you so much, and that's awesome!! I'm definitely really sad they don't go to a higher grit, but the taping sanding paper is an awesome work around. Love it!
Based on the blade shape how difficult you think it would be to sharpen a zt 0462? This is probably my hardest knife to sharpen and also my baby I have been torn on buying this sharpener for a while and have been watching countless videos. Best video I have ever seen on this I really encourage you to make more videos. Absolutely phenomenal
What is the best way to clean the Strop. ? Or do I have to replace it?
Dude...very nice edges. Hat tip to you man! I have the Professional Precision Adjust and it's the same crazy sharpness mirror finish results using just what came in the box, it's such a great sharpening system and so first time friendly too. I'm always looking to improve my skill and results, and your video is an excellent tutorial that I really enjoyed watching. You explain things in a very easy to understand way and I learned a lot today, especially regarding stroke technique, thank you! I ordered the ceramic honing panels and a lapping film sheet set to make a custom 7 panel lapping film kit for the Worksharp to push the edge sharpness and mirror finish even further. Again, great video and great edges.
@@davidsapir9638 hey, thank you so much!! I'm really glad you found it useful and that you got some new insight, I appreciate your compliments a lot! That's awesome about the lapping film and ceramic, I forgot to mention that as an option, I bet you'll get great results. Thanks again for the comment, happy sharpening!
UPDATE 2 - The new an improved Worksharp Pro Precision Adjust is out, and it's INCREDIBLE. Yes, I bought one, and yes I'll make an updated video soon. th-cam.com/video/76hvZKpGVhY/w-d-xo.html
UPDATE 1 - No official higher grits coming.
I've been in contact with the worksharp team and they confirmed that there are no additional accessories or grit patterns coming out for this system. I shared this video with them and they are currently reviewing it with their product team but it would be a while before anything official came out.
Thank goodness there's a lot of aftermarket options; go check out NeevesKnives great video on the topic.
th-cam.com/video/OXLw4B8BAek/w-d-xo.html
A mirror finish is beautiful but honestly not all knife steels cut well with a mirror great information in the video but you need the micro serration for the knife to stay working sharp so the cross hatching works as we seen for mirror and mirror only for a perdy knife. Check out neeves he has a video explaining what steels like what kind/grit edge. For example maxamet takes a mirror but so slick it’s just show I keep my maxamet pars 3 at about 400 grit and it keeps a sharp edge for so long thanks for the info in the video not judging so please don’t take it that way at all I use the same system but use a 6 inch stone holder with venev stones keep up the great videos I’m now a subscriber
@@bighamz1175 that is a great point, and something I could have made more clear in my video. That's being said, I wasn't trying to make a video like neeves made (which is great), I was trying to show how to get a mirror polish -- that's it. Then everyone can use the information however they want. Got a maxamet blade? Cool, don't put a mirror polish on it. I'm not saying every knife HAS to have a mirror polish, just that it's possible on this system and how to do it.
You make a great point and if I ever make a followup I will definitely make that more clear :)
@@TheTerribleTen no sir want question you at all buddy that is a perfect video no doubt but a lot people think every steel like mirror and that don't work lol keep it up
Polished works great for a push cut.
So a year or so later, would you still recommend this system or go for the pro model? I’m just an enthusiast who likes to keep his daily carry knives sharp, but I am looking to step up from the guided field sharpener, which does a fantastic job.
Hey! Thanks for asking. After purchasing the advanced pro system, I can say it's worth it to upgrade. It adds so much great updates that make a huge difference. I'll post a new video with that system soon.
@@TheTerribleTen hey thanks for getting back to me! I’d love to see you do a video of the new pro system after using it for a while. That would be cool!
Breaking your scratch pattern with a cross hatching pattern will work for polishing better without going way up on grit. It helps break up small faceting. The problem is that you are creating a broken tooth pattern to the micro serrations. This is how to get a great paper slicing edge that will pop hair and whittle hair but it will loose it's bite incredibly quickly in use creating a slick edge with in just one or two strop backs. If you don't care about maintaining bite in the edge and just want great push cutting performance then what your doing is great. If you want to create a mirror edge without creating a slick edge then cross hatching is not gonna work well for ya. I personally can't stand a slick edge.
Those are great points thanks for bringing them up. As you mentioned the goal of this video was not to talk about edge retention or edge bite which is incredibly difficult to measure and test, this video was purely to demonstrate how to get a mirror edge without using any additional tools or techniques. That being said I do agree with your points and think it comes down to personal preference as you mentioned. I don't mind a slick edge at all especially since I usually have leather around and stropping my knife up isn't an issue for me. Thanks again for trimming in!
This is a great video! I have one of the precision adjust elite sharpers and I really like it alot.
I actually quit using my Tormek T8 after I got the precision adjust. It's just easier for me to use.
Have you used the Tsprof K03? I'm curious to see what your thoughts are about it compared to the precision adjust.
Thanks so much! I really appreciate the comment and I'm glad you enjoyed it 😊
I have not used the KO3, but I do know that it's basically on another level and is essentially the granddaddy of the precision adjust. It has way more capability, bigger range, more grits, so many more amazing things about it. And I would certainly hope so since it's 700 to $1,000.
Thanks again for the comment and good luck sharpening
@@TheTerribleTen I have not used any Tsprof sharpeners yet either. I've been really considering purchasing the K03 since I seem to like the stone and rod type systems. Hopefully one day I will get my hands on one.
Thanks again for making this video, I'm going to be using your technique for now on when I use my precision adjust.
Hi
Thank you for your good video, how long does this knife sharpener usually work? And after how long should it be replaced?
Second question, how can we find out what angle number to use for each type of knife, such as 15 degrees or 17 degrees or 20 degrees or 25 degrees or 30 degrees?
Hey! These "stones" can last YEARS, you shouldn't have to replace it any time soon if you take care of it.
There are great websites and videos outlining what angle is best for each application. It all depends on what you're doing with it, what the steel is, etc.
@@TheTerribleTen
Hi
Very thanks
I agree with 90 percent of what you’re passing along. A lot of it is known sharpening facts but I question the 5x5x5x5 2 times and then 5x5x5 x5 and then 4x4x4x4 and I’m still learning myself but it might not take every steel that long to create a burr or it might take some steels longer. And don’t you want to stop once the burr is formed and then drop down in grit and continue on the procedure? I just feel like for some blades 440. 8CR 15V you’re just going to be wasting material. Sure it’ll take years and years to really chew through your blade but i feel as for some blades it might be overkill and for some maybe not enough. Looking for your feedback! Great informational video by the way. Oh I have seen one other guy get a mirror finish with this system and a strop but he was using the saw method and it was still a bit rough.
@@Ryan.S924 thank you so much for your detailed comment, those are great points and I agree with them. There are a couple reasons I mention the strategy the way I do, but you are correct -- the most important thing is to look for a bur IF you care about sharpening less material away.
1. Most stock blades have inconsistent grinds, and require a lot of attention to rebalance. I mention this during the meaty part of the video.
2. Stopping at a bur will leave a lot of the valleys in the material, because a bur can form at micro intervals and it FEELS like it's all the way across, but in reality there are a little of microscopic areas which need leveling off.
3. Consistency. I'm trying to strike the balance between seasoned sharpeners and novices, so I laid out what I thought would be good ground rules based on my own testing for reliable mirror edges.
4. With some decent stropping you can MAINTAIN. Mirror edge, and touch it up with ceramic, so hopefully you aren't starting over 5x5 4x4 3x3 etc. I would never take a knife I've already mirrored through that process unless I beat the heck out of it. I'd probably start at 600 grit, ceramic, strop.
5. Risk vs. reward. As you mentioned, it would take a Looooong time to remove enough material from your knife to be significant, but those watching the video would probably consider that worth it in the long run since what they are here for is mirror finishes. Everything has a pro and con.
That all being said, you make an excellent point and I'm glad you commented. Anyone who is concerned about removing a lot of material should take note of your thoughts and consider the points I mentioned above.
Thanks again friend! Happy sharpening
Thank you for this video it's great 👍
Great video!! Thank you for sharing.
All my respect
That's really impressive. I just ordered a Kershaw brawler lol
Thanks so much! It's a really great beater knife, I think you're gonna like it. I didn't carry mine for a long time cuz it was so dull so often and I wasn't motivated to sharpen it. Now I am :)
Enjoy your new blade!
@@TheTerribleTen thanks man.
Thank you! Much appreciated!
I appreciate the 5555, 4444 explanation 😅
I know I am a bit late on this but people are still commenting on the video. I'd add the recommendation to 3D print on of the available clamp support blocks for the PA/Elite.
Thank you !
You shouldn't use water on those diamond stones because they will start to rust out. It's an interesting video but seems like a lot of extra work. I use the work sharp precision and it works great but if I want a mirror polish I literally use 3 small leather strips with diamond paste. And the paste is like 10 bucks. But if you search 4 inch hapstone holder for work sharp you can start adding higher grits for it. Great video 👍
Thanks so much for the great comment! I didn't specifically call it out but I do dry each stone after use. I've used water on diamond stones for about 10 years now and haven't had any rust yet. Fingers crossed.
Totally valid point there, that's definitely another way to get a polish. The reason for the video was to see if I could accomplish a mirror polish without any compounds, but that's definitely a way to do it.
LOVE the after market components for this system, as you mention. I call those out in the extended intro.
Thanks again for bringing up those great points, awesome contribution and perspective.
@@TheTerribleTen Watch the new Zac in the Wild video about the new professional sharpener work sharp is releasing. Thing is sick.
I saw it!!!! Mam...I'm getting one.
The best leather for a strop is Kangaroo leather from Australia. Get some and see the difference that this makes.
You will be surprised.
Wow I had no idea about that! Thank you so much for the heads up I will get some and let you know what I think :)