Indeed. I mean, so much choice, but I hope I break it down enough for people to be able to decide and choose correctly. :) Thanks man for the constant support.
a friend of my buy a other model from Antec , there was build in button to change the colour, so i think you must buy a loss part who can handele the colour system.
I have this case.... you cannot change the colour of the pre installed rgb fans at the front..... only way is to remove them and install your own unfortunately.
My case came with two RESET SW cables, I connected it randomly and nothing happened to my motherboard, that is a factory error or the one you did the review came the same because I have doubts about this situation
maybe somebody have advise ...... i connect the fans to my motherboard >> not working /no light, and that is strange because my water cooling fans are working correctly with motherboard. When i connect the antec fans directly to my power supply they work correct, but can t change the colour. thanks
I bought this case, it looks simple yet gorgeous but there no option change the color of those pre installed fans.. this is so annoying :( please let me know if you know any solution for that 🥲
@@eltonfrank2758 GPU clearance for this case is 270mm. Hellhound RX 6700 XT is 305mm, so that one won't fit. Challenger RX 6700 XT is 269mm, so it will be a tight squeeze, but should fit.
i buy him already ........... advise dont go for this because the plastic clamps crap from the front panel. When you wanna clean, the risk the clamp breaking .... choose for other case with screws.
Glad to see a compact atx machine we need more of these
Yeah, I hope I'll get the chance to review more of these type of cases. :)
Antec is killing it with their cases. Damn. So much choice they offer. Keep up the great work bro and stay safe.
Indeed. I mean, so much choice, but I hope I break it down enough for people to be able to decide and choose correctly. :) Thanks man for the constant support.
man your air cooler just killing the look,,
Can you please provide me your cooler shop link
would you say this is worth it still? it's like the cheapest by far, even cheaper than deepcool ch370
I have it, I'm not complaining
Does anyone know what fan specs are included with the case?
hace poco lo compre espero no arrepentirme.
mejor que el sentey debe ser
Can i put a 255mm lenght graphics card
Will the a850gl and rx 7700 xt will fit in that case??
This case have a 240mm liqiud cooler support on the top?
whats the maximum gpu lenght capacity
How to turn off the RGB in the front fans of this case?
Unfortunately, I don't think you can.
Any idea how to connect the pre installed fans?? They're molex and I plugged them into my PSU and nothing happens?
Remove the fans and replace with non rgb ones.
@@nonono9194Ask the shop you bought it from. Thats what I would do.
a friend of my buy a other model from Antec , there was build in button to change the colour, so i think you must buy a loss part who can handele the colour system.
I have this case.... you cannot change the colour of the pre installed rgb fans at the front..... only way is to remove them and install your own unfortunately.
Did you not watch the video you cant change the colour
will msi gtx 1660 super ventus oc fit?
Yes
Would an asus gtx 1080ti rog strix fit in this case
My case came with two RESET SW cables, I connected it randomly and nothing happened to my motherboard, that is a factory error or the one you did the review came the same because I have doubts about this situation
You can't connect it randomly. RESET SW cable goes to the RESET switch jumpers, so you connect them there and you can reset the PC when needed.
how to install an HDD/ssd on antec AX20
Can i install a cooler master 550w psu and asrock challanger rx 5600 xt? And how many ssd can i install, can i install a 3.5inch ssd?
Just for a season i saw his hair style and i think he is cr7😅
How to change the rgb colors
Unfortunately, you can't. Fixed RGB. :(
Can 30cm 4pin cpu from psu reach the centre of the motherboard?
Must my psu fan face up or down in this case because my new psu is loud fscing down
maybe somebody have advise ...... i connect the fans to my motherboard >> not working /no light, and that is strange because my water cooling fans are working correctly with motherboard. When i connect the antec fans directly to my power supply they work correct, but can t change the colour. thanks
sir what is the height could u tell me in inches?
Hi, thanks for the video, I understood that my RTX 3050 will fit same about my motherboard, but what about the ssd, I would have problems?
Hi, you are welcome and sorry for the delay on replying. So you can place 2.5" SSD in the HDD cage in the PSU shroud.
will gainward gtx 1660 super fit in this case
I am building a pc and im getting this case it looks like good case just wondering will a ATX Motherboard fit??
Yeah, ATX board fits. I used ATX board. ;)
will an RX 6700 XT fit in here?
Which model exactly?
@@PCCrazyDario xfx speedster swft309 AMD Radeon rx 6700 xt core
@@Niseandryt Unfortunately no. The GPU length is 304mm while the GPU support inside the case is up to 270mm. :(
@@PCCrazyDario I will get the x90 in that case then, I believe it will fit well in that case, right?
@@Niseandryt Max GPU length for GPu is 385mm in AX90. You are good to go. :)
Can i fit the rx 5700xt 3fans asus tuf gaming in it?
Please help 0:
@@noufelhamami8489 Unfortunately, no. Space for the GPU is 270mm and less. Your GPU is 282.6mm
ssd overlaps with motherboard?
What SSD?
@@PCCrazyDario i think mb overlaps the vertical ssd slots
@@paulribera5502 Yeah it does, but the SSDs are placed on the back side of the case.
I bought this case, it looks simple yet gorgeous but there no option change the color of those pre installed fans.. this is so annoying :( please let me know if you know any solution for that 🥲
Unfortunately, no chance of changing RGB. It says on their website, fixed RGB. :(
can cut the light of those fans or replace them with ARGB lights?@@PCCrazyDario
Is this support liquid cooling
You could place it on front, but then you are sacrificing the space for the GPU unfortunately.
Molex connections need to go away and never return.
I totally agree with you. I really hate those connectors.
Molex for the win.
Will the 6700XT fit in this case?
Which model exactly?
@@PCCrazyDario Hell hound or Challenger
@@eltonfrank2758 GPU clearance for this case is 270mm.
Hellhound RX 6700 XT is 305mm, so that one won't fit.
Challenger RX 6700 XT is 269mm, so it will be a tight squeeze, but should fit.
@@PCCrazyDario well... Think i'll go with the PULSE Sapphire then
@@PCCrazyDario Thank's for your time
Will it fit Deepcool AG400 cpu cooler?
Yes, DeepCool AG400 is 150mm in height, while the ANTEC AX20 supports up to 155mm.
How do I remove the front panel?
Press the crocodile clips from the inside of the chassis. ;)
Thanks
@@lastcrystal4893 You are welcome :D
@@PCCrazyDario it s a crap idea to open everything, next time i go for case with screws on the front panel.
@@flipflipflap8293 That doesn’t exist unfortunately. As far as I can remember, all are either magnetic or crocodile clips
I bought this just because the simplistic design❤️
Totally. :)
Any idea how to connect the pre installed fans?? They're molex and I plugged them into my PSU and nothing happens?
Did you mention a GTX 3060 can fit there?
It fits i have it
Can a msi gtx 960 2gb fit in this case?
Yes
@@xmoumen thanks
@@xmoumen Thanks for the help on answering. :)
i buy him already ........... advise dont go for this because the plastic clamps crap from the front panel. When you wanna clean, the risk the clamp breaking .... choose for other case with screws.
will the asrock-h510m-hdv-m-2-motherboard fit?
Yeah, supports ATX, mATX and ITX boards so you are good.
@@PCCrazyDario thx bro! i'll tell all my friends to sub to u
@@DistinguishedNoob You are welcome. Much appreciate it. :)