I have a old philips wifi system and its left channel stops working randomly. and when the amplifier heats at some extent, it works normally. I have tighten the connectors as you shown and now the problem is reduced.....but somehow it still stops sometimes....what could be the issue😢
@@achilleasskkiller2814well I got it repaired from the trusted and experienced technician and he said that one of the track on PCB was broken thats why it was failing.
My left channel on my amp is gone the right channel still works perfectly. I took AC measurements and got .560mV on the left and right outputs. Should I maybe check my cartridge on my turntable maybe its a problem with the left channel there it's what I have running to the amp? I have checked the rca cables and they are fine. Also any checks I can do inside without tearing the amp apart? Can I check transistors and resistors in circuit with the power off using my multimeter?
My receiver will not play sound out of the left speaker unless I cut power to the receiver and back on again then I get both front speakers working. Turn it off and back on and then only the right speaker will play. I have reversed the speakers, the wires, the RCA input, always the same issue. Any idea what the problem could be?
My Peavy CS800S works only on Input A and output B. basically only works the left channel as input but the output must be on the right channel. I wonder what that could be. Anyone that could help please?
My anthem 225 integrated amplifier having the right channel sound very low compare to left channel, then the day after that it has no sound at all, please advise me what to do😢 Just purchase about 1 week ago😪
Good afternoon good people Can someone please assist with information for finding the "Supersonic AV-972SB Amplifier Circuit Diagram". I burnt 5 of my resistors and I'm unable to see the required ohm's
I would definitely advise against touching anything in the amplifier while it is plugged in this guy might be a professional and that is still not good practice.
Nice job. You make it look easy. And as one person added, not everyone speaks English and that's ok!
Thank you very much ... I will try to create subtitles for the videos
@@AlfredH do so!
useless to have the title in English but doing the narrative in a totally different language. Title language needs to match the content language.
very good! I assume the problem was dry solder joints?
Hi ... thank you very much
I have a old philips wifi system and its left channel stops working randomly. and when the amplifier heats at some extent, it works normally. I have tighten the connectors as you shown and now the problem is reduced.....but somehow it still stops sometimes....what could be the issue😢
Dude, I have exactly the same problem with mine.
@@achilleasskkiller2814well I got it repaired from the trusted and experienced technician and he said that one of the track on PCB was broken thats why it was failing.
thank you, apprently, the cable of the rca inside of the amp was loose that left the left speaker working and not the right one
My left channel on my amp is gone the right channel still works perfectly. I took AC measurements and got .560mV on the left and right outputs.
Should I maybe check my cartridge on my turntable maybe its a problem with the left channel there it's what I have running to the amp?
I have checked the rca cables and they are fine.
Also any checks I can do inside without tearing the amp apart?
Can I check transistors and resistors in circuit with the power off using my multimeter?
Did you fixed it!
@@left-handedsailor4772 no i gave up and threw it away
Thank you my friend , by the way add subtitles , please of what you speak although it is visible what is the problem and the solution...
use subs english for all to understand it better this is a.great knowledge add some more troubleshooting techniques ty for the videos
ouldrick finale it is I. Vietnamese I know because I am half Vietnamese.
Not everybody speaks english
so what just happend to the R channel? just reheat?
My receiver will not play sound out of the left speaker unless I cut power to the receiver and back on again then I get both front speakers working. Turn it off and back on and then only the right speaker will play. I have reversed the speakers, the wires, the RCA input, always the same issue. Any idea what the problem could be?
It's a real pain to cut the power every time I want to get both front speakers working, that or never turning it off... lol
You can try to replace the variable resistor with the total output of 2 speakers: the variable resistor controls the volume of the amplifier
Same issue with yamaha
My Peavy CS800S works only on Input A and output B. basically only works the left channel as input but the output must be on the right channel. I wonder what that could be. Anyone that could help please?
My anthem 225 integrated amplifier having the right channel sound very low compare to left channel, then the day after that it has no sound at all, please advise me what to do😢 Just purchase about 1 week ago😪
what is the trouble sir?
Good afternoon good people
Can someone please assist with information for finding the "Supersonic AV-972SB Amplifier Circuit Diagram". I burnt 5 of my resistors and I'm unable to see the required ohm's
neew subscriber po idol
thank you !
Useful video
Bahi maine amplifier wire maine direct socket main laga diya I think my speaker has damaged for this
Can you tell me it is possible
Banda Vietnamese mein baat kar raha hai. Or tumne usse hindi mein sawal kar diya🥴.
My amplifier works when I play through the USB or plug in mic
But gives very low sound when the input is from DVD line
you check pre-amplifier circuit
Where can i get that tool the Beeps when it finds the issue?
it's a 101j resistor ur local hardware store will surely have them
damn, someone's trying to game the system and be rich off identifying problems with a single tool
@@azeemn1333 that's a capacitor dawg
Hi I have a technics stereo integrated amplifier SU-V98 with a fan in the back an it only spin at full power
what do you mean
@@AlfredH it's a home amp stero the fan at the back only spin at full volume but now it won't output any power
in case you have the same problem , just spray the knob with wd-40 and say that you did something like wtf he does on the video
That perfect but next time english
In my sony music system one surround channel is not playing so guide me what can I do?
Please review the volume potentiometer (total volume)
I would definitely advise against touching anything in the amplifier while it is plugged in this guy might be a professional and that is still not good practice.
Kenwood speaker
Vậy tại sao loa 1 ben lớn bên nhỏ?
làm tiếng anh phải có phụ đề tiếng anh chứ.
Nice
thank
English pls
???
😕😕😕
.