That all depends on the code put on the config file. Proffieboard is absolutely capable of doing that. If your interested in more Proffieboard information I’d look on the Facebook groups and follow Tom Tilmon’s channel Megatooth Sith he goes more in depth on answering questions like that.
Those that are watching this video I actually hold the led in with hot glue not super glue. My mistake. Hot glue makes it so you can pull the led out if needed. Super glue would be difficult, I wouldn't recommend it.
Jediseth thanks for the quick response and great video! I’ve been trying to find a tutorial for a crystal chassis for a long time and everyone just seemed so reluctant to share any ideas or methods on the process. So thank you very much!
lorenza lewis if your a DIY guy I’ve been making them out of just cutting a clear glue stick into the shape I want, then you use watered down paint to color it and after the paint dries I seal it with clear fingernail polish. You can even add glow in the dark paint to make it look like it’s cooling down after your chassis light powers off. There are a few vids here on TH-cam about it.
I was just about to post that ...just fou d this video . So LED is one issue next is google how to say chassis. Also while am at it put this out here why why why have people started saying abbreviations as words ???? Short hand made into words good lord.
Nobody actually pronounces "LED" as "lead" as in "pencil lead." It's just "ell-ee-dee." The negative lead ("leed") is the cathode, not "cathoid". The disc is pronounced "chass-ee" not "chass-is"
Yeah I learned that over the years, thanks. Your also not the first one to point that out in the 6 plus years this has been floating around. The true point of communication is for the listener to understand. I think you got the point without responding back.
Cool! Thanks for the demo! I'm gearing up to build my first crystal chamber and this is very helpful.
Thanks, sounds awesome! Good luck with your build, that’s exciting.
Awesome video brother!!
Will the crystal match the blade style and color if I’m using a proffie board and a neopixel blade?
That all depends on the code put on the config file. Proffieboard is absolutely capable of doing that. If your interested in more Proffieboard information I’d look on the Facebook groups and follow Tom Tilmon’s channel Megatooth Sith he goes more in depth on answering questions like that.
@@sethwinegar ok. Thank you
That's neat! I've been hand building chambers myself for a while now ^_^. Much better results I find, then some of the machined stuff
Christian Gayle Thanks, I should probably offer something else more advanced. It was meant to give a basic idea to those beginners interested.
@@sethwinegar it's a really good starting point ^_^, great for beginners. Just gotta add a few more greeblies and you'd be golden
Nice.
Those that are watching this video I actually hold the led in with hot glue not super glue. My mistake. Hot glue makes it so you can pull the led out if needed. Super glue would be difficult, I wouldn't recommend it.
Jediseth what size threaded rods do you us, m2 or m3?
Proptor FPV the threaded roads that are available at the TCSS store . I believe they are 3/16 inch.
Wonderful My Friend
Hello! I am new to all of this and wonder if there are any hilts out there that are crystal chamber ready or is a chamber than added after?
Thanks!!!
It’s usually added. I build all mine from scratch. You might be able to find one if you look hard enough. Try Saberforge.
@@sethwinegar will do! Thanks for the quick reply and awesome build!!!
can this fit in a saberforge saber?
Where did you get the coax cable ends? Did you buy them or cut them off old cables?
Ezra Knigh, Radio Shack, but I’m pretty sure you can find them elsewhere.
Jediseth thanks for the quick response and great video! I’ve been trying to find a tutorial for a crystal chassis for a long time and everyone just seemed so reluctant to share any ideas or methods on the process. So thank you very much!
where are the crystals obtained from?
Alex Finnigan EBay
I cannot find them looked everywhere could you link?
Alex Finnigan m.ebay.com/itm/50g-1-7-oz-Lot-Tibet-Natural-Clear-Quartz-Crystal-Points-Wand-Specimen-US-Seller-/381871749732
where do you get you get your crystals from
lorenza lewis, EBay.
lorenza lewis if your a DIY guy I’ve been making them out of just cutting a clear glue stick into the shape I want, then you use watered down paint to color it and after the paint dries I seal it with clear fingernail polish. You can even add glow in the dark paint to make it look like it’s cooling down after your chassis light powers off. There are a few vids here on TH-cam about it.
Here are a few parts of the saber:
The emitter,
The crystal,
The lens,
And the cap on the bottom.
Jake Hoina, sorry I’m not sure is that a question?
Ok so Im gonna ask the obvious question I guess. What is TCSS?
Zakary DeLaura The Custom Saber Shop
L.E.D not led. light emitting diode is what it means
Martin Cabrera, Yes your correct. LED was slang.😊
I was just about to post that ...just fou d this video . So LED is one issue next is google how to say chassis. Also while am at it put this out here why why why have people started saying abbreviations as words ???? Short hand made into words good lord.
Great tutorial but who taught you to pronounce chassis 😂
Cycle Trail obviously an uneducated person.
You’d think after 10k views I’ve probably already been schooled.
Good video
Just a nitpicking side note, it's pronounced "chass-ee"
Saine Oliver Sakurai, That’s how we pronounce it in Utah. 😊
LOL! It's free country so you can pronounce words anyway you want...however, it is pronounced chass-ee! btw, it is a nice tutorial...
@@sethwinegar its definitely pronounced chas-ee
@@sethwinegar also LED is pronounced ELL E DEE not lead
@@sethwinegar great video tho very informative
Nobody actually pronounces "LED" as "lead" as in "pencil lead." It's just "ell-ee-dee." The negative lead ("leed") is the cathode, not "cathoid". The disc is pronounced "chass-ee" not "chass-is"
Yeah I learned that over the years, thanks. Your also not the first one to point that out in the 6 plus years this has been floating around. The true point of communication is for the listener to understand. I think you got the point without responding back.
As an EE, that hurt my head in this video lol.
Make me.one and send me one I'll buy it
Ryan Zuchinski No.
Is this fake Quantum electronics!! I know this is an ploy for show only!! Come on this is fake New age electronics!! Nice try!!😢😢😢
Christina Caruth Lightsabers are essentially just toys. Nothing wrong with creativity.