I just ended up getting mine as soon as I was able to get it. I saved about $20 with a Target coupon, so I'd say that a $60-ish commander-class figure makes up for its assembly error.
I just fixed both of mine with a watch band pin remover. Was super easy to do. Zero stress marks, and zero damage. No need to really seek out the correct ones, now.
We found more problems with assembling. When you transform op to vehicle mode and vice versa, the blue hinge pieces that connect the op's red front waist pieces could be wrongly assembled. If the end of the pieces is a smooth curve, it's ok. But if it has sharp edges, it was wrongly assembled (could cause stress marks on the plastic).
Mine doesn’t bother me at all I really didn’t even notice it but I’m glad they are getting the fixed heels! I mean we shouldn’t even have to worry about this they should be 100% from the start!
I figured they'd do a running change variant like what eventually happened with Kingdom Galvatron. Sure, it could/should have happened sooner. The factory changes to fix these shouldn't be this slow to implement, I'll give you that. Still, tho... I'm glad I got my SS86 Optimus for about $20 less with a Target coupon.
Personally I'm not bothered by the misassembly however I'm glad they're still fixing it even though most people aren't bothered by this coz it shows even if we're not upset they are trying to show standards.
I’ll be fine, I already got two Optimus prime 86 figures already 😅, I’m more focused on getting the 13 primes, devastator, and the aerialbots (age of the primes figures)
Notice that it was only fixed after they sold thousands of copies. This is a dirty trick where they deliberately release incorrect batches than they can sell the corrected version to all of us who already bought the first round.
Or buy the new one and return the old one. It’s really not a bad thing because it was technically assembled wrong even though it’s barely noticeable but still considered misassembled. Hasbro themselves should provide free shipping for the return and replacement. The figure ain’t cheap and it’s on them to correct it.
I know Right some fans just don't get it. If you want better products then you need to let the company know. However some fans think that customers shouldn't say anything. And just accept whatever the company gives them.
That is tough. Missing Link is a treasure with the added engineering. However, SS'86 Prime, just looks like the cartoon. Plus getting one now may just have the correct heel fix. I would go with SS'86 Prime imo!!!
bought mine at target less than 2 weeks ago but am saving it for christmas (reliving my childhood opening an optimus christmas day) Do you think I got a fixed one from the new batch?
@@superroboted Pride in that you make is what should drive them to release a good product. The Headmaster Weirdwolf from Titans Return had a glaring error that will break the toy. There was no re-issue, no fix. Even Takara did not correct the mistake. It is good at least they are fixing this issue with SS Prime. Let's be honest though it does not break the figure.
*Check the bottom of the box for the following batch numbers:*
*42431 (international)*
*42831 (international)*
*42971 (domestic)*
I ended up fixing mine and it’s proven to be a small but useful skill to pick up, I’ve since been able to take apart other figs to get things fixed
It’s cool that they fixed it, not sure it justifies a second purchase though. Especially given that in the UK he costs more than £90!
Never said it would warrant a second purchase...that is entirely up to you. I want one that has correct heels, so I might get a 3rd one if I can.
Thanks for the comparative picture, very helpful.
Thanks for watching!!
I guess I'm glad I didn't jump on him right away then.
I just ended up getting mine as soon as I was able to get it. I saved about $20 with a Target coupon, so I'd say that a $60-ish commander-class figure makes up for its assembly error.
I just fixed both of mine with a watch band pin remover. Was super easy to do. Zero stress marks, and zero damage. No need to really seek out the correct ones, now.
We found more problems with assembling. When you transform op to vehicle mode and vice versa, the blue hinge pieces that connect the op's red front waist pieces could be wrongly assembled. If the end of the pieces is a smooth curve, it's ok. But if it has sharp edges, it was wrongly assembled (could cause stress marks on the plastic).
I have not had that issue.
Mine doesn’t bother me at all I really didn’t even notice it but I’m glad they are getting the fixed heels! I mean we shouldn’t even have to worry about this they should be 100% from the start!
That's what I'm saying
I didn't care at first but over time it wore on me. I popped out the pins and changed mine. It wasn't to bad at all if u have the right tools
42271 is also fine, which has also been out for a little bit now.
I got my '86 prime from Ali Express(because everywhere else was sold out), the heels on mine were correct anyway so no worries here.
I figured they'd do a running change variant like what eventually happened with Kingdom Galvatron. Sure, it could/should have happened sooner. The factory changes to fix these shouldn't be this slow to implement, I'll give you that. Still, tho... I'm glad I got my SS86 Optimus for about $20 less with a Target coupon.
That is some great shopping skills!
Almost as important- do we have any recourse with hasbro for the affected units? Now that I finally managed to snag one.
The incorrect version actually looks better having the border at the bottom! Whats the big deal?!
Mine didn't sit right in incorrect position but sit perfectly now they have been fixed. I caused a small stress mark but it dont bother me
Personally I'm not bothered by the misassembly however I'm glad they're still fixing it even though most people aren't bothered by this coz it shows even if we're not upset they are trying to show standards.
I’ll be fine, I already got two Optimus prime 86 figures already 😅, I’m more focused on getting the 13 primes, devastator, and the aerialbots (age of the primes figures)
My main issues is the paint qc with this Prime, I’ve seen many issues from paint, assembly and tolerances with this release
Yeah I had some overspray around the grill. Luckily it came off with a fingernail but when I first opened the package…🤨
Notice that it was only fixed after they sold thousands of copies. This is a dirty trick where they deliberately release incorrect batches than they can sell the corrected version to all of us who already bought the first round.
Its only a trick if we are lazy, just grab your 1/16 pin puncher.
Or buy the new one and return the old one. It’s really not a bad thing because it was technically assembled wrong even though it’s barely noticeable but still considered misassembled. Hasbro themselves should provide free shipping for the return and replacement. The figure ain’t cheap and it’s on them to correct it.
Wait, do we have a specific date on when we are getting the second batch of ss86 optimus prime?
Christmas is a great time to be getting this figure
I just ordered another one from hasbro pulse. Here’s hoping the feet are correct!
I just got it in the mail today and can confirm the heels now come correct.
I got him at tf con and right out of the box his Back heels were miss a sample but me my dad fixed it
Still can't get this guy as either the corrupt scalpers got them or Hasbro not distributing enough.
Got mine from a 3p about a week ago, and based on the pic mine is incorrect. I’m undecided about fixing it.
I feel you. It's a tough decision.
Be nice if I could actually find it somewhere
Wouldn't this make the other worth more in the future? Now im debating on opening the older version
I would say yes....
I honestly don't even care enough to fix mine but I'm not against getting a second one that hopefully is fixed
I only preordered mine about 1 moth ago, so mine should be good.
I hope you do.
I know Right some fans just don't get it. If you want better products then you need to let the company know. However some fans think that customers shouldn't say anything. And just accept whatever the company gives them.
Off topic but i need some help. If u dont mind, which would u choose missing link vs ss86 op? Can have only 1. Not play much mostly collect. Thank u.
That is tough. Missing Link is a treasure with the added engineering. However, SS'86 Prime, just looks like the cartoon. Plus getting one now may just have the correct heel fix. I would go with SS'86 Prime imo!!!
@superroboted thank u so much 😄
I say get your tax refund which u can get pretty quick if u file as soon as possible and buy both. They are both can't miss figures
bought mine at target less than 2 weeks ago but am saving it for christmas (reliving my childhood opening an optimus christmas day) Do you think I got a fixed one from the new batch?
Hard to say....you might be able to open it without cutting the ties and see if the heels are correct.
Are u gonna wrap it yourself only to unwrap it on Christmas day (which by the way is my birthday)
@@randymerrick3347 yes i will! reliving the joy! also happy birthday to you and Jesus!
Hopefully i will get a correct version, but if not not a big deal.
...and this is why Hasbro does not care.
@@superroboted Pride in that you make is what should drive them to release a good product. The Headmaster Weirdwolf from Titans Return had a glaring error that will break the toy. There was no re-issue, no fix. Even Takara did not correct the mistake. It is good at least they are fixing this issue with SS Prime. Let's be honest though it does not break the figure.
@@DMSL2007 Stop, because it doesn't break it doesn't make it right. hence why I said Hasbro loves you...
Glad I ONLY payed $39.99 for it. But the feet on mine were correct.
First one from Amazon was incorrect. Second one from Entertainment Earth was correct. Keeping the EE one mint in box 😉
Yeah, gotta get one of those.
Wouldn't the mistake one be the one to keep mib? First release sealed, one on display correct
@@PixelsNcreatureS Opened the Amazon copy soon as I got it.
Yeah, idc about those heels lol 😂 but im not gonna dog on anyone looking for it but if i was concerned i would just fix the one i have.
Ok
Not trying to sound stupid or Karen .. but what was the difference? It look the same am I missing something?
I was thinking the same thing but if you look closely there's a border on the top and it's flat on the bottom of the heel