Held my breathe there for a second, good job mate. It will slide on easy when you want to put it back on because you have it angled up like that. Looking forward to the reverse video.
Well done Dom !! Get the repair’s done before the river season , nothing more ruins a day of fishing being stuck on the side of the road with a disaster on your hands in 30+ degrees of sun. Take care cheers Geoff 👍😀
Hay buddy, I was away at Fiji last week, just finished watching Tuesday video and this little mid week surprise. Great work mate keep them coming. Cheers
Hi Dom. When you put the boat back on. Unhook the trailer from the car and present it to the boat by lifting up the hitch end and pushing as far as you can against the boat. Hook up the winch line and winch the boat onto the trailer letting the trailer roll back under the boat as you winch until the trailer wants to fall down on the hitch. Make sure your jockey wheel is down and once the boat is fully on put on your safety chain and Roberts your relative. It is also easier when removing the boat from the trailer. Gerard not Dianne. Tight lines.
Nice work chicho , I was a bit nervous for you but indaying that you did it perfectly, nice and slow . When is she getting back in the aqua ? Keep well mate 👍
Bloody good effort mate. Working on your pride and joy whilst trying to film is a massive task. Got some work to do on my trailer as well mate so won't be the last time I watch this vid. Ive got some tyre collecting to do 😄
Nice work Dom, I have very similar Dunbier trailer that also needs work- I will try the guy you used in Osborne Park. I am going to try do my lift off the trailer slightly different, I have a two ton engine crane and I think I am going to try and lift the bow up off the trailer with that having the stern resting on tyres and then just drive the trailer out and whack some tires under for taking weight off crane. Stressful stuff for sure, well done doing by yourself… I think I will have a few beers and a mate or two to offer support haha cheers
The suspense. Well done mate. I painted my trailer while the boat was still on. I couldn't paint the keel roller rack because of cause the boat was on. Trailer is black and the keel rack is white. I wanted to take the boat off the same as you did but i was too afraid. Now i will give it a shot. Thanks mate 👌
@@FishTuckerMan thanks mate. I ask the boss if i could borrow his tractor tyres that he has laying around the vinyard. He said yes but you can't bring them back. Hahah. I don't need tractor tyres laying around ny house. No room for them
Dom I found with my boat (similar to yours) when I put it back on the trailer I did it unhooked from the car and the draw bar of the trailer lifts up as it requires and then I just winched it back on, was really easy, then as you winch the trailer pulls back under the boat to the point where the draw bar comes back down
Hey Dom, my bro in law has learnt from experience to always take the ear muffs off the motor when you aren’t flushing the motor. If you forgot to take them off you will cook the motor really quickly at the boat ramp when you start it up!
We had a Brooker V14 many years ago and it was on a “tilt trailer”….how easy it was to launch and retrieve…I also was able to easily remove it from the trailer when I replaced rollers.
Nice dom! id say if you have the extra $$ and time to get it repaired, blasted and re galved. Its actually not that expensive and will last another 10 plus years!
Hi Dom great video mate. Question is that falcon your towing/lauch vehicle? I'm asking because I recently bought I 14ft quintrex and I have a falcon the same as yours but I'm concerned that it not be able to recover the boat and trailer from a boat ramp
At 64 and female , I found this very interesting. Thanks DOM
Your very welcome Kim!🥂
Nice job, Dom! Love the safety boots, by the way! 🤣🤣🤣
Cheers Marcel😁
Held my breathe there for a second, good job mate.
It will slide on easy when you want to put it back on because you have it angled up like that.
Looking forward to the reverse video.
Lol..so did I all day lol, thanks mate👍
I see that you are still a learner! Haha. Well done Dom.
Lol...L on taking boat off the trailer
Love the L plates, well done 👏
Lol..glad you noticed😁👍
All you had to do was ask and I coulda told you how to do this! Glad you managed to work it out mate
Thanks Ian😁👍
LOL I think you need at least 3 beer DOM 👍👍
Lol 😁🍻🍻🍻
Bravo Dom!
Grazie Leo!👍
Nicely done Dom!!
Thanks Max👍
1st time is a bit stressful, well done Dom.
Lol.yes very stressful🍻👍
Good job Dom, well done 👏 cheers Tony
Thanks alot Tony 👍
Well done Dom !! Get the repair’s done before the river season , nothing more ruins a day of fishing being stuck on the side of the road with a disaster on your hands in 30+ degrees of sun. Take care cheers Geoff 👍😀
Cheers for that Geoff!, so true mate, or even getting inspected by the authorities 👍
Hay buddy, I was away at Fiji last week, just finished watching Tuesday video and this little mid week surprise. Great work mate keep them coming. Cheers
Thanks alot Ray👍👍
Hi Dom. When you put the boat back on. Unhook the trailer from the car and present it to the boat by lifting up the hitch end and pushing as far as you can against the boat. Hook up the winch line and winch the boat onto the trailer letting the trailer roll back under the boat as you winch until the trailer wants to fall down on the hitch. Make sure your jockey wheel is down and once the boat is fully on put on your safety chain and Roberts your relative.
It is also easier when removing the boat from the trailer.
Gerard not Dianne.
Tight lines.
Thanks alot Gerard! Exactly what Ive got planned👍👍
I used this technique also, it puts a lot less stress on the equipment than trying to winch it on with it locked to the car.
Cheers mate have to get my boat off next week to work on trailer,very helpful
Your welcome mate
Nice one Dom!
Make sure you have the bung out with all that rain 🌧
Looking forward to the finished product! 👌
Haha..yeah they were out, cheers mate👍
You need a tilt trailer Dom! I have one, never use it until you do that 😊
Lol..thanks Mate👍
Done like a professional Dom , will be interesting to see you put the boat back on 😊 cheers 🍻 🐓 🐓 🍺
Cheers for that Reddy, glad I broke a cheery on this one👍🍻🐔
A new/used trailer from Santa would be nice 🤣🤣 Be good to the missus cos you never know 😉😉
Lol..not worried about the Mrs👍
Nice work chicho , I was a bit nervous for you but indaying that you did it perfectly, nice and slow . When is she getting back in the aqua ? Keep well mate 👍
Thanks mate..yeah was a bit nerve wrecking at first..will be soon mate👍
Bloody good effort mate. Working on your pride and joy whilst trying to film is a massive task. Got some work to do on my trailer as well mate so won't be the last time I watch this vid. Ive got some tyre collecting to do 😄
Lol..thats awesone mate, cheers👍
Nice work Dom, I have very similar Dunbier trailer that also needs work- I will try the guy you used in Osborne Park. I am going to try do my lift off the trailer slightly different, I have a two ton engine crane and I think I am going to try and lift the bow up off the trailer with that having the stern resting on tyres and then just drive the trailer out and whack some tires under for taking weight off crane. Stressful stuff for sure, well done doing by yourself… I think I will have a few beers and a mate or two to offer support haha cheers
Great idea mate..yes this techinque good for the small boats👍
I gotta do mine this week little nervous but love this video will help alot
Goodluck mate, take your time and it'll come good 👍
@@FishTuckerMan thanks bro
The suspense. Well done mate. I painted my trailer while the boat was still on. I couldn't paint the keel roller rack because of cause the boat was on. Trailer is black and the keel rack is white. I wanted to take the boat off the same as you did but i was too afraid. Now i will give it a shot. Thanks mate 👌
Thanks alot mate👍 youll be right just take is slowly and depending on how heavey it is, just prop up with more tyers if you can, good luck👍
@@FishTuckerMan thanks mate. I ask the boss if i could borrow his tractor tyres that he has laying around the vinyard. He said yes but you can't bring them back. Hahah. I don't need tractor tyres laying around ny house. No room for them
Great idea I will be fixing my trailer the same way. Thanks
Awesome, thanks mate👍
Dom I found with my boat (similar to yours) when I put it back on the trailer I did it unhooked from the car and the draw bar of the trailer lifts up as it requires and then I just winched it back on, was really easy, then as you winch the trailer pulls back under the boat to the point where the draw bar comes back down
Sounds great Luke,cheers👍
Thanks dom grate video mate 🤙
Thanks alot Doug 👍🍻
Good job Dom…… leave the front nice and high so you can get it back on….!!!!
Cheers Wholls👍
Hey Dom, my bro in law has learnt from experience to always take the ear muffs off the motor when you aren’t flushing the motor. If you forgot to take them off you will cook the motor really quickly at the boat ramp when you start it up!
Lol..i did that with the smaller tinnie once...deformed the prop lol👍
Hola amigo muy hermosos sus botes, saludos desde Chile.
Hola amigo mucho grazies!
Nice bro 🤙🏾🍻
Cheers man🤙
We had a Brooker V14 many years ago and it was on a “tilt trailer”….how easy it was to launch and retrieve…I also was able to easily remove it from the trailer when I replaced rollers.
For sure Mark, tilt trailer wouldve been easy 👍
Nice job done getting the boat off Dom. Wonder what a new trailer is worth, just thinking. Cheers mate👍
Thanks mate!. For my boat prob between 3 and 4k depending on cable brakes if fitted
@@FishTuckerMan Yeah too much money. Look at larger diameter rollers if you can. 👍
heheh, youtube has everything boaties need lol. that winch rope , hope its on the maintenance list, just saying lol.
Sure is mate..got a new one for the retrieve, cheers👍
Nice one could have used the other boat winch with a bridal on you aft cleats and use the other boat winch to pull it off just a thought 😁😁
Thanks Ray..too technical for me mate😁👍
Nice dom! id say if you have the extra $$ and time to get it repaired, blasted and re galved. Its actually not that expensive and will last another 10 plus years!
Thanks alot Nick! Yeah good idea mate👍
Hi Dom great video mate. Question is that falcon your towing/lauch vehicle? I'm asking because I recently bought I 14ft quintrex and I have a falcon the same as yours but I'm concerned that it not be able to recover the boat and trailer from a boat ramp
Mate these Falcons are built for this 4ltr staright 6 ..strong engines 👍
When you put it back on winch the trailer under the boat instead of the boat onto the trailer , if that makes sense
Sure dose Mick, thanks 👍
nice one
Cheers mate
Sir....Great video....But have another question. What is the maker of the boat you took off the trailer?
Thanks you!. Quintrex
I did my boat just recently, all I did is hook the boat to rope and tied it to the tree, drive trailer forward, works for me 😂
Well done!! If i had a tree Id do the same👍
Thanks for the vid mate. Let us know how much the repairs cost! Also, why is there 10,000 ads during this vid? A lot more than usual?
Thanks mate..sorry, I havent had a chance to trim them yet👍
woohoo first
Cheers mate 👍
Those steel cables for the brakes end up stretching over time and you run out of adjustment very quick even with good brake pads.
Thanks mate..i replaced with new ones
Totally stupid way to take it off the trailer
Thanks for watching