Why would an unmechanical retired teacher of English language and literature subscribe to and ENJOY these heavy equipment videos? Because I have a passionate fondness for irony, and you, sir, are a fine practitioner of that under-appreciated form of wit. Thank you for sharing your gift.
Being an old wrench twister, just about ready to meet his maker, I thought I would say Thank You for making my days a little better by getting to hang out, and forget about this nasty world for a while.
Came here to say exactly the same thing, knowing without a doubt I wouldn't be the only one. One day, eh? Think my wife would kill me. A small dozer on the other hand....She wants a homestead garden after all. Shhhh, no one tell her you don't need a cat D6. Okay okay fine - an old D2 would be ok I guess. She even called one she saw cute. Think I'm off to the races
Mate,I have operated these trucks for 20 years and trust me they are the most uncomfortable things to drive,they have no real suspension (they do but it's for holding such weight and not comfort) the seat is the only suspension you get. If you drive into a hole that's a foot deep you will get thrown around the cabin even hit your head on the roof,that's if you don't have your seat belt on,and there are times you just jump in and go forgetting the belt.
I’ve worked for a Cat dealer since 1994. I spent many hours fixing and actually did quite a few rebuilds of these good old girls. Thanks for the memories this brings. Tranny oil is definitely not good. Too much water can ruin the clutch discs.
@@amunderdog hard to say. Could be moisture build up from years of sitting, maybe fill cap left open for a few months, top cover gasket gone and winter snow melts in spring gets into case. Ive seen plenty of dozer winches full of milky oil and not due to sinking in water but just top cover gaskets are shot and water migrates in. It doesn’t take a lot of water to cloud oil, the problem is, lots of water will effect any clutch packs that have friction discs made from cellulose based material vs rubber. Water causes them to swell so when you think the clutch pack is not engaged it’s actually still rubbing and contacting. Typically first gear is a rubber based disc and other are more water sensitive.
We bought a new log splitter back in May this year and the damn oil was full of water in a couple months of letting her sit. Weather changed and went from cool to humid in a couple of days. Almost hoopa jooped the damn thing. Fuel had a good bit of water as well,luckily we caught it.
Amazing - not a single gasket or hydraulic leak on the whole thing!!!!!! Here in Aus we would run a CEM engine flush to clear the buildup around the rings, a very good chance that would fix the blowby. I have used that flush in a Toyota 2H diesel engine with 400,000ks, drained 14 litres of oil and goop out of a 10 litre engine!
@@leekazan556 And then you don’t notice until it is coming toward you, but the wheel is in the way and you are either getting it on your front or your arm as you wiggle out :D (me one time)
@@TheCeki1982 You sure? This guy repairs/rebuilds CAT engines. Parts are available. Are they expensive? Yeah, but a brand new engine is more expensive. I'm going to guess, based on your username and this comment, that you've never worked on a CAT engine.
Working for Bergerat Monnoyeur Belgium - market leader BENELUX. Apart from the fact that I come into contact with, among others, Caterpillar on a daily basis, I have no affinity whatsoever with the product in question ... .
As always you are very thorough and accurate with going over your equipment! you apply the correct level of maintenance and attention to something based on what it's going to be used for and its practical value. In other words, you didn't pull that engine and fix everything on that haul truck. You did what was smart and correct investment to get the work you need done! Most people either drive it until it drops without enough maintenance or they rebuild everything - Money and time is wasted in both cases!
I’m a gas engine mechanic now 34 years and never on a diesel. You man have me thinking about a career change. Tired of building damn LS AND SBC enigines. Thanks for great content. I’m definitely a new subscriber for life
Best thing you can do with it is make sure you run it as much as you can. In other words if you are not going to use it daily, at least start it ,idle it, and move it around a little bit. Will save you money in the long run and it will help you sell it when it is that time. Enjoy your real big toy to work with.
A little TLC she'll make it to 25K.......I have seen quite a few D-8 listed with close to 50K hours. Might need a couple tires eventually, engine sounds really good, blow by looks "normal" . Someone probably left the fill cap off the tranny or it was stolen and sat quite a while before someone noticed it was missing.
I drove that same rock truck for five days a week and for a year man ,it can go pretty much anywhere except for deep mud ,and it was reliable and a beast ,we would load boulders and stumps and all kinds of brutal stuff ,always felt like a tank that I was driving and it’s fun to operate
Something I've always wondered about this type of truck; if you are stopped and you turn the wheel, will the whole cab turn while stationary or do you have to be rolling to steer?
@@partyguy9 it's been awhile but I think u have to be moving ,but if u flip the load only the bed goes over and the cab stays up right, at first there hard to get used to but then man are they easy to back up anywhere ,unless u got maybe a sixty ton Volvo that you're working in a tight area ,but there very easy to drive
I work on these for a living, 21k hours ain't that bad and that rig has plenty of life left in it. I have some 772 and 773 along with a couple 745 that have double the hours and a couple hitting 50 and 60k hours. Some of those are Quarries and those rigs run 24 hours a day and rarely shut down
@@nathanmullaney6946 I work for a CAT dealer, I do work on Volvos occasionally and their a pleasure to work on since they make the filters so easy to get to although I prefer Case since that's what I learned to work on originally
@@nathanmullaney6946 In my experience all the construction brands have their issues but overall most of the equipment does that job with zero issues if its used right. I could write a book of the stuff I've seen busted because of stupidity
Don't know what you paid for it, but I'm pretty impressed, you buying it sight unseen. Looks like it was a good buy, all things considered. I think you should easily get another 500 hours out of her...
Awesome video sir! Pretty cool with the J Paydirt shoutout. Being from Montana, I've watched him for 3-4 years now. He is a Cat man through and through. The trans fluid sure reminded me of calf scours yellow. Gotta love it.
20:30 I felt that one.. and boy that does not look seem like something you want to see. Look like something from the bathroom just minus everything going all over the place.
Very nice looking haul truck. Looking forward to see what project you have lined up. Don’t forget to check the pumpkins and planetary oil. Thanks for the video.
Awesome content!! love it when you breathe fresh life into old neglected machines (new oils and filters) being an allround operator in the Logging and earthmoving industries you know how hard these machines work with no mercy given.
Haha, we picked up a couple of those to finish up a job and send the newer 40 tonners to a new job. One old timer said, 'Boss, I have a rule not to run anything older than me and that pos qualifies". He was about 60.
I'm a gold prospector so I'll definitely be checking that channel out and subscribing👍 my friends used to work at a local tyre garage and they would repair any tyre. I used to go out and get the wheels with them. Often earth movers. When they got them back they would cut new treads into them and I had a go. It's not hard to do so maybe give it a go and save yourself a fortune. Obviously the perished ones you will have to replace. It's quite therapeutic cutting them.
Always nice to see such close ups videos of this big machinery, love the mechanics of this monster the moving parts. I loved it. It’s a real work horse.
I've only ever cut down two trees totally by myself. From felling, to limbing, to logging (bucking?) and hauling it all off. But I had to move the trunks off my friend's lawn without murdering his grass & beautiful landscaping etc. So dragging them like you did was out of the question, plus my li'l old 38hp 2wd tractor hasn't got the cojones for it. So, Necessity, southern ingenuity & innovation kicked in, (even though I'm yokel from N.E. England) I made a few wraps around the trunk with a long chain hooked to my tractor. That thing rolled right out of there and didn't leave a mark. Now I have some beautiful White Oak for my woodworking projects, and a happy customer.
Thats a niiiiiiiiiiiiiiiiiiiiiiiiiiiiice 6x6. I think it would be worth fixing it up back to very decent specs. This would also increase its value. If it was mine...hell...I'd even give it a fresh coat of paint too!
Interesting watching the maintenance on the ol' girl. Sounds good for being tired. Got to watch a crew a few years ago doing roadside maintenance on one of the big belly scraper earth movers - for some reason, they decided to flop it on it's side...
i work for caterpillar and build and weld up the dump bodies in the UK, its good to see how well these hold up over a time period and the beating they take.
Glad to see Ya again bud, hope yall been doing well. Appreciate the videos and all your time you put into them. That 3406 sounds good on the deceleration rev match Jake braking.
After looking below at just a glance and seen a short comment by a english teacher, I feel I met my match in witticism an cut to the chase. I am guessing that even though most of these large machines get put to bed wet.... I have to think with that many hours some haven't been as hard as say those gold miners on the Yukon where soft wire is the best they have for cotter pins. If its a liquid then close enough for who we work for. I have worked up there when the famous Tony Beets was a pup or guess what mom, there is a foccell in our yard and it moves. I have only memories of things we did an sometimes they are worse than the trip uncle sam gave me in the late sixties. I mainly spent most of my time in the southeast alaska islands and when something large came... it died there. All those islands where there was mining or logging mostly has the carcuses of dead equipment laying in pits and we called them bone yards as it was where we got our "new to use" part just repurposed for it. Out at Thorne Bay where government subsidized roads to open for public eventually, was muskeg that just didn't have a bottom and we hauled rock into those spots. A dozer gets stuck and started down, they gave a half hearted attempt to get it out and then if not our, let the muskeg have it and build road over it. One crazy spot was known to have got three D8s and something else in it too deep before moving forwards with the road. I think it will last a while this machine that you got as a whole looks fair to me. What would I know though and only thousands of miles away on a computer.... at least it is not a grandmothers basement/LOL
I really like how you keep things clean while working on your equipment, and how your shop and yard looks. One of the better looking redneck amusement parks I have seen.
Hello, don't know how you feel about free advice but to get the big windfall moving I would have done two things different. First of all I would have filled the truck with dirt or gravel or something to increase your traction friction ratio. The big difference would be to put your choker or chain on and back up so you can rotate the cable around the base several times (4-5 times) and cause the tree and stump to roll once the cable gets tight. Loggers do this all the time to roll a tree away from the stump. I might not have explained this strategy clearly but I tried. Cheers from Canada.
I think you got a good deal on it, should last a couple thousand hours easy. The next time you need help with the belly pan use your other left hand, a come-a-long.
Ran one of those at a coal mine that was converted into a fuel truck beat the shit out of it for three years didn't break once. Heater sux ass but 30 below Wyoming winters are pretty cold.
Drove one much like this in a sandpit.Had mud up to the hubs once and the trick was to keep off the gas and let it chug.Just like an old riverboat pulled real slow,but kept going.
I don't know anything about heavy machinery. I like how you pointed out "that's the transmission" because I don't know what that could've been. Thanks!
Why would an unmechanical retired teacher of English language and literature subscribe to and ENJOY these heavy equipment videos? Because I have a passionate fondness for irony, and you, sir, are a fine practitioner of that under-appreciated form of wit. Thank you for sharing your gift.
yes hes a good man, good content an hes got a good channel.
Hey, if you find it interesting that’s all that matters!
I'm just a Journeyman Stucco applicator.
This is one of the best responses to a video I have read. I felt it.
I like that and the fact he looks like he's 12 and sounds like he is 50.
Being an old wrench twister, just about ready to meet his maker, I thought I would say Thank You for making my days a little better by getting to hang out, and forget about this nasty world for a while.
“More hours then an Amish sawmill” 😂
😂😂😂😂
I fucken died 😭
Than
🤣
Nearly spit my dinner out when he said that. I'm gonna use that one!😄🤣
21:06 the morning after 12 PC lights, two baconaters and a few sticks of gas station pep n cheds
Bout a below average night eehhh
Time to break out the bum gun or get back in the shower…
holy shit its you lol
Great night, Bad decisions
Nailed it.
I have absolutely no use for a machine like that, and yet I want one. Well done, and thanks for sharing the view!
Came here to say exactly the same thing, knowing without a doubt I wouldn't be the only one. One day, eh? Think my wife would kill me. A small dozer on the other hand....She wants a homestead garden after all. Shhhh, no one tell her you don't need a cat D6. Okay okay fine - an old D2 would be ok I guess. She even called one she saw cute. Think I'm off to the races
If I had one I could surely make a use for one
Mate,I have operated these trucks for 20 years and trust me they are the most uncomfortable things to drive,they have no real suspension (they do but it's for holding such weight and not comfort) the seat is the only suspension you get. If you drive into a hole that's a foot deep you will get thrown around the cabin even hit your head on the roof,that's if you don't have your seat belt on,and there are times you just jump in and go forgetting the belt.
@@DEPORTER_SUPPORTER I don't doubt they're uncomfortable. But I still want one. :)
Exactly....I want one of his rebuilt Cat engines and I have NO idea what i'd do with it...
Hours of entertainment for us “big kids” until the diesel runs out or it breaks! Love it. 👍🏻
@Jeremy Nottingham I know, but that takes time and money. That’s no fun.
@Jeremy Nottingham what else do you call it when a part fails lol, "here ye here ye, Why Sir I seem to haveth discombobulated thy hyedro line"
@Jeremy Nottingham Legos 2.0
@Jeremy Nottingham I hear ya. I still enjoy fixing stuff, but when you get overloaded fixing everyone else’s crap, it takes the fun out of it.
I’ve worked for a Cat dealer since 1994. I spent many hours fixing and actually did quite a few rebuilds of these good old girls. Thanks for the memories this brings. Tranny oil is definitely not good. Too much water can ruin the clutch discs.
So where does that much water come from?
@@amunderdog hard to say. Could be moisture build up from years of sitting, maybe fill cap left open for a few months, top cover gasket gone and winter snow melts in spring gets into case. Ive seen plenty of dozer winches full of milky oil and not due to sinking in water but just top cover gaskets are shot and water migrates in. It doesn’t take a lot of water to cloud oil, the problem is, lots of water will effect any clutch packs that have friction discs made from cellulose based material vs rubber. Water causes them to swell so when you think the clutch pack is not engaged it’s actually still rubbing and contacting. Typically first gear is a rubber based disc and other are more water sensitive.
We bought a new log splitter back in May this year and the damn oil was full of water in a couple months of letting her sit. Weather changed and went from cool to humid in a couple of days. Almost hoopa jooped the damn thing. Fuel had a good bit of water as well,luckily we caught it.
So is this bigger than a cat 745
@@walsh9354 not quite. This is a 40 ton not a 45 ton version but a whole lot more metal and less plastic than the 700 series trucks of today.
Amazing - not a single gasket or hydraulic leak on the whole thing!!!!!! Here in Aus we would run a CEM engine flush to clear the buildup around the rings, a very good chance that would fix the blowby. I have used that flush in a Toyota 2H diesel engine with 400,000ks, drained 14 litres of oil and goop out of a 10 litre engine!
🤯🤯
@Eclipse538 Seafoam is alcohol based so it will actually dry out your seals/gaskets
Such good content as always. In case anyone wondered 21000 hours is just under 2 1/2 years total running time. Crazy
That's insane bruh
@@zachsteele6964 it’s insane but when I worked in those things, you’re in them for damn near 12hours a day lol it adds up quick
I thought of it as a car running at 50mph so that's over 1million miles.
7.19 years at 8 hours a day.
And even more on most Mines. The only break the equipment gets is, shift change, PMs or repairs.
I love the marker trick and the amish sawmill joke 🤣🤣🤣
I love the repair that you did in the cab. I wish I ran into more jobs that were that easy.
Here in California that rule is honored in the breach.
Man when that thing let loose with that transmission diahera I bet it felt instant relief!! Ole girls been holding that in for awhile😂😂🍻
It reminded me of the puke scene in Team America :D
I was worried it was going to overflow!!
@@leekazan556 And then you don’t notice until it is coming toward you, but the wheel is in the way and you are either getting it on your front or your arm as you wiggle out :D (me one time)
The TH-cam algorithm strikes again. I don't know a thing about earth moving equipment but sat through the whole video and wanted more.
Holy shit he's back and I dropped what I was doing to watch this video. Fookin love this channel.
CAT is so expensive & complicated when it comes to new parts if they can't be repaired.
@@TheCeki1982 You sure? This guy repairs/rebuilds CAT engines. Parts are available. Are they expensive? Yeah, but a brand new engine is more expensive. I'm going to guess, based on your username and this comment, that you've never worked on a CAT engine.
Working for Bergerat Monnoyeur Belgium - market leader BENELUX. Apart from the fact that I come into contact with, among others, Caterpillar on a daily basis, I have no affinity whatsoever with the product in question ... .
I always dislike comments from people like you just because it's annoying
@@trxtech3010 Feel free.
One of the most underrated channel on TH-cam just like Watch Wes Work.
Agree!
Agreed, great channel
agreed along with andrew camarata
Yes sir! This and Watch Wes Work needs more views! YEE YEE! 🤘🏻🦅🇺🇸
@@sterlingyoung88 don't forget diesel creek!
I was hoping this was going to be a Vise Grip Garage "... and then try to drive it home" style video, but it's greatness as is.
That would have made a feller happy
Another VGG watcher? Well I’ll be dipped!
I work at a quarry in CA, we have the same rig. As well as a Volvo haul truck. Hard working trucks
Buying an A40D Volvo tomorrow already have a bell B50D real mules. Lost a komatsu hm400-1 to a fire boy did that truck work.
@@wth82 what was the fire from
incredible clean, strong sound of the engine. CAT is a legend! I've heard the same sound to a cat dozer built in 1950!
As always you are very thorough and accurate with going over your equipment! you apply the correct level of maintenance and attention to something based on what it's going to be used for and its practical value. In other words, you didn't pull that engine and fix everything on that haul truck. You did what was smart and correct investment to get the work you need done! Most people either drive it until it drops without enough maintenance or they rebuild everything - Money and time is wasted in both cases!
Glad you fixed the most important thing, straight away... with a Sharpie!
Those style of cat trucks always have a place in my heart, just a cool look to em
I’m a gas engine mechanic now 34 years and never on a diesel. You man have me thinking about a career change. Tired of building damn LS AND SBC enigines. Thanks for great content. I’m definitely a new subscriber for life
So pleased you’re over 100k subscribers now mate, I’ve been here since 4K! Big love from the U.K.
Hey bloke
Best thing you can do with it is make sure you run it as much as you can. In other words if you are not going to use it daily, at least start it ,idle it, and move it around a little bit. Will save you money in the long run and it will help you sell it when it is that time. Enjoy your real big toy to work with.
"Ive got it warmed up, Oh shit" hahaha, great video!
A little TLC she'll make it to 25K.......I have seen quite a few D-8 listed with close to 50K hours. Might need a couple tires eventually, engine sounds really good, blow by looks "normal" . Someone probably left the fill cap off the tranny or it was stolen and sat quite a while before someone noticed it was missing.
Nothing like the sweet music of that Cat turbo-diesel spooling up. The parts you think are boring are my favorite. Well wishes from Fate Texas!
I drove that same rock truck for five days a week and for a year man ,it can go pretty much anywhere except for deep mud ,and it was reliable and a beast ,we would load boulders and stumps and all kinds of brutal stuff ,always felt like a tank that I was driving and it’s fun to operate
Were you tearing sh*t up playing around with it?
@@rudyleotardo8278 no just work ,but there like a tank to drive
Something I've always wondered about this type of truck; if you are stopped and you turn the wheel, will the whole cab turn while stationary or do you have to be rolling to steer?
@@partyguy9 it's been awhile but I think u have to be moving ,but if u flip the load only the bed goes over and the cab stays up right, at first there hard to get used to but then man are they easy to back up anywhere ,unless u got maybe a sixty ton Volvo that you're working in a tight area ,but there very easy to drive
Your sense of humor is top notch my friend.
I like how you repair stuff, no expense spared !
Do you want it done RIGHT or not. If you’re going to depend on it to work things have to be right.
Cool Vid.. Glad to see you back. So nice not seeing ads for merch and begging for subs... Enjoying your knowledge and experiences. Thanks for sharing.
I was starting to panic as that barrel filled and it was still pouring milkshake.
thats a cool truck the amount of oil in that gearbox was insane lol
I work on these for a living, 21k hours ain't that bad and that rig has plenty of life left in it. I have some 772 and 773 along with a couple 745 that have double the hours and a couple hitting 50 and 60k hours. Some of those are Quarries and those rigs run 24 hours a day and rarely shut down
I know right the company I used to work for had several Volvo’s at just over 28k hours and still strong
@@nathanmullaney6946 I work for a CAT dealer, I do work on Volvos occasionally and their a pleasure to work on since they make the filters so easy to get to although I prefer Case since that's what I learned to work on originally
@@Psycodiver69 interesting, I’ve never ran a case truck but maybe one day when my business gets bugger I’ll buy one haha
@@nathanmullaney6946 In my experience all the construction brands have their issues but overall most of the equipment does that job with zero issues if its used right. I could write a book of the stuff I've seen busted because of stupidity
In my younger days I worked at a open cut mine ran a cat 980H with 64k miles i still see it used out there im amazed to see it going
Just finished watching . can't wait to see this truck work and the shenanigans when it stops. Glad to see you back.
Don't know what you paid for it, but I'm pretty impressed, you buying it sight unseen. Looks like it was a good buy, all things considered. I think you should easily get another 500 hours out of her...
Another great video. Everyone needs a 40T rock truck.
I know nothing about engines but i do appreciate a master of his art at work hats off to you
Awesome video sir! Pretty cool with the J Paydirt shoutout. Being from Montana, I've watched him for 3-4 years now. He is a Cat man through and through. The trans fluid sure reminded me of calf scours yellow. Gotta love it.
The sticker repair was F ing awesome! 👍👍
If he crossed out the "CA ENVIRONMENTAL REGULATION" as well, he would have had a double kill.
This is fascinating. Thanks for taking the time to show me how this equipment works.
20:30 I felt that one.. and boy that does not look seem like something you want to see. Look like something from the bathroom just minus everything going all over the place.
Very nice looking haul truck. Looking forward to see what project you have lined up. Don’t forget to check the pumpkins and planetary oil. Thanks for the video.
Man I wish you would post more often I enjoy your videos more than almost every other youtuber
with that many hours that machine has been running for almost 2.5 years constant.
Mines are unreal operations in how they run equipment
We use these in construction too for cut and fill operations. Seen them tip over dumping, 350 puts her back on all 6 and away she goes.
Your a bad ass dude would like to call you a friend.. from GA I am, glad we still have folks like you and paydirt entertaining us 🇺🇸
You got the BEST back yard toys!!
that truck is in amazing shape compared to what i run every day on our jobs...
We have D25c at work an they are old an tired but still get the job done a little slower then the newer ones but oh well
Awesome content!! love it when you breathe fresh life into old neglected machines (new oils and filters) being an allround operator in the Logging and earthmoving industries you know how hard these machines work with no mercy given.
Haha, we picked up a couple of those to finish up a job and send the newer 40 tonners to a new job. One old timer said, 'Boss, I have a rule not to run anything older than me and that pos qualifies". He was about 60.
I’m blown away by how much oil the transmission drained. Wow.
Having lived by the Amish I understand your saw mill reference. Outstanding job, who wants a milkshake!
00:44 KT: "Well she definitely ain't pretty"
Me: "Ohhh man, she's beautiful !"
You are one of those guys that even when your working on and old wore out piece of equipment you still do outstanding work well done sir
Great video! I miss the old 400 trucks. They sounded great.
i honestly laugh out loud at least 5 times watching ur vids listening to you describe something🤣🤣
enjoy your thanksgiving my friend
I love this channel, this Man is a master of his craft!!
I guess that's why Dad always said to get him a big bucket when he was servicing the transmission. Thank you for another great video!
Looks like urine to me
@@staceytowers9056 I rekon I'd be headed to the clinic if it looked like that.
Thanks for making these videos. Always a pleasure to see what your up to.
I'm a gold prospector so I'll definitely be checking that channel out and subscribing👍 my friends used to work at a local tyre garage and they would repair any tyre. I used to go out and get the wheels with them. Often earth movers. When they got them back they would cut new treads into them and I had a go. It's not hard to do so maybe give it a go and save yourself a fortune. Obviously the perished ones you will have to replace. It's quite therapeutic cutting them.
Who needs a sports car when you've got one of these. :-D
You had me leaning in my chair trying to help push to get the tree to move. Enjoy your channel
"I just warmed up the transmission...Oh shit!!!" Just the other day I saw that happen to another youtuber fixing his machines.
Always nice to see such close ups videos of this big machinery, love the mechanics of this monster the moving parts. I loved it. It’s a real work horse.
I've only ever cut down two trees totally by myself. From felling, to limbing, to logging (bucking?) and hauling it all off. But I had to move the trunks off my friend's lawn without murdering his grass & beautiful landscaping etc. So dragging them like you did was out of the question, plus my li'l old 38hp 2wd tractor hasn't got the cojones for it. So, Necessity, southern ingenuity & innovation kicked in, (even though I'm yokel from N.E. England) I made a few wraps around the trunk with a long chain hooked to my tractor. That thing rolled right out of there and didn't leave a mark. Now I have some beautiful White Oak for my woodworking projects, and a happy customer.
Love the steel cable theft protection of the ignition key. :)
Thats a niiiiiiiiiiiiiiiiiiiiiiiiiiiiice 6x6. I think it would be worth fixing it up back to very decent specs. This would also increase its value. If it was mine...hell...I'd even give it a fresh coat of paint too!
The way she is running, no hydraulic leaks she could go beyond the 500 your asking of her.
*you're
Engine is not usually the problem everything else falling apart is
@@jumpinjojo ur ur ur ur
@@ronniewilliz153 Genius.
@@jumpinjojo your mom
Good toy and nice playground. Brings back memories from my childhood.
Interesting watching the maintenance on the ol' girl. Sounds good for being tired. Got to watch a crew a few years ago doing roadside maintenance on one of the big belly scraper earth movers - for some reason, they decided to flop it on it's side...
i work for caterpillar and build and weld up the dump bodies in the UK, its good to see how well these hold up over a time period and the beating they take.
Glad to see Ya again bud, hope yall been doing well. Appreciate the videos and all your time you put into them. That 3406 sounds good on the deceleration rev match Jake braking.
One of the best video channel on TH-cam. Keep please them coming. Your are certainly a talented tech.
The way the coolant cap spins is so satisfying
Average Joe buying a old rig might be unwise but as I see this man works on heavy machines so this makes sense .
After looking below at just a glance and seen a short comment by a english teacher, I feel I met my match in witticism an cut to the chase. I am guessing that even though most of these large machines get put to bed wet.... I have to think with that many hours some haven't been as hard as say those gold miners on the Yukon where soft wire is the best they have for cotter pins. If its a liquid then close enough for who we work for. I have worked up there when the famous Tony Beets was a pup or guess what mom, there is a foccell in our yard and it moves. I have only memories of things we did an sometimes they are worse than the trip uncle sam gave me in the late sixties. I mainly spent most of my time in the southeast alaska islands and when something large came... it died there. All those islands where there was mining or logging mostly has the carcuses of dead equipment laying in pits and we called them bone yards as it was where we got our "new to use" part just repurposed for it. Out at Thorne Bay where government subsidized roads to open for public eventually, was muskeg that just didn't have a bottom and we hauled rock into those spots. A dozer gets stuck and started down, they gave a half hearted attempt to get it out and then if not our, let the muskeg have it and build road over it. One crazy spot was known to have got three D8s and something else in it too deep before moving forwards with the road. I think it will last a while this machine that you got as a whole looks fair to me. What would I know though and only thousands of miles away on a computer.... at least it is not a grandmothers basement/LOL
wtf are you talking about
My man you are up there with Wes and Camarata. Awesome content!!
I really like how you keep things clean while working on your equipment, and how your shop and yard looks. One of the better looking redneck amusement parks I have seen.
This is nice to watch in a home theater with proper subwoofers :D
The neighbors be like, "What did he buy this time?"
*very loud revers beeps announce something big
He's a Missouri boy. The neighbors probably figure it will be fine. Lol.
I SCREAMED OUT LOUD AS SOON AS I SAW HE UPLOADED
Hello, don't know how you feel about free advice but to get the big windfall moving I would have done two things different. First of all I would have filled the truck with dirt or gravel or something to increase your traction friction ratio. The big difference would be to put your choker or chain on and back up so you can rotate the cable around the base several times (4-5 times) and cause the tree and stump to roll once the cable gets tight. Loggers do this all the time to roll a tree away from the stump. I might not have explained this strategy clearly but I tried. Cheers from Canada.
Aaaaahhhhhhhh that wonderful sound of that kitty purring.
I think you got a good deal on it, should last a couple thousand hours easy. The next time you need help with the belly pan use your other left hand, a come-a-long.
That bit of blow-by is pretty normal for that Cat engine. You might be surprised what a chain saw can do for you .
Lovely to see that truck. I used to work for DJB of Peterlee England the company that sold articulated trucks to Cat. Thanksd for the video.
Idk why its so cool to watch you play with this big dump truck 🤣
The one dislike is from a Prius owner
Might have been Greta
Ran one of those at a coal mine that was converted into a fuel truck beat the shit out of it for three years didn't break once. Heater sux ass but 30 below Wyoming winters are pretty cold.
Thanks for making these-(retired geologist always loved mining equipment.) You are a rock star!
That transmission fluid was giving me flashbacks of a bad night of Taco Bell nachos.
"More hours than an Amish sawmill" 🤣🤣🤣
Great video , Just keep them coming .
Drove one much like this in a sandpit.Had mud up to the hubs once and the trick was to keep off the gas and let it chug.Just like an old riverboat pulled real slow,but kept going.
I can listen to that CAT purring all day long!!!!
Didn't think you had enuff barrel there for a bit .
The old transmission oil reminds me of lancing some lump jaw on a cow! :)
And good times sharing the jpaydirt!
I don't know anything about heavy machinery. I like how you pointed out "that's the transmission" because I don't know what that could've been. Thanks!
Man that thing is a hell of a rig. Runs great!