ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to Charge a Car Battery at Home | FOXSUR 12V Pulse Repair Charger for Weak Battery
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2022
- Car Battery Charger 12V 5A LCD Intelligent Automobile Motorcycle Pulse Repair UK Plug Motorcycle battery Charger 7.0 Ver FOXSUR
*For Personal emergency use only
* If your battery under warranty by supplier , pls direct claim better.
* Device checking your battery status , Capacity & Voltage without plug in power socket
Product Features:
1. This is a fully automatic battery charger with 3 charge stages.
2. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
3. 3-stage chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
4. Types of batteries: Most types of 12V lead acid batteries including Calcium, GEL and AGM, Wet, EFB, VRLA maintenance free lead acid etc.
Description:
Model:FBC1205D
Item type:Battery Charger
Microprocessor Control (CPU).
Switchmode technology: Yes
Polarity protection: Yes
Output short protection: Yes
Non battery link protection: Yes
Over voltage protection: Yes
Over temperature protection: Yes
Cooling: Fan
Specifications: British regulations (UK)
Input voltage: 100-240V AC, 50-60Hz 75W
Input Current: 0.5A(RMS) @230VAC
Output Voltage : 13.8v - 15.5V ,Max. 5A
Minimum start voltage: 8.0V
Battery range: 4-100Ah
Thermal protect: 65'C+/-5'C
Efficiency: App. 85%.
Size:150*85*60mm. (0.6*0.34*0.24in)
** Pulse Repair Mode : if Battery status below 10V just push the repair button , it will repair till auto stop . ( 5- 24 hours )
#carbatterycharger #BatteryCharger #12vbatterycharger #NS #Din #Charger #NS40 #ns60 #NS70
#foxsur
Frequently Asked Questions:
1. The LCD display "FUL", but the battery is yet fully charged.
Reason: As the Battery inside resistance is too large or the capacity of battery is reduced for Feeder Battery, vulcanized Battery, Low voltage/Long-idle time Battery, the voltage of battery will immediately soar, causing the "FUL" status occurs when the battery is yet fully charged.
Solutions: Press "repair" button, activate the battery.
Reason: There is no AC power input.
2. Battery voltage is normal, however the charger does not work:
Reason:There is no AC Power input
Solutions: Check the AC-power source are working or not, change the socket and re-try it.
3. Unable to reach "FUL" status after charging in long time.
The battery has been vulcanized, or feeder, or water depletion in the battery. The battery voltage will keep low status, causing the battery unable to get fully charged.
Solutions: Stop to charge when the battery is heating, check the battery is in shortage of liquid or Not. please charge cycle 1-2 times (Discharge-Charge, Discharge-Charge).
Looks like this Foxsur charger has a similar repair function to a Noco Genius 5 or 10, or CTEK battery chargers that use 16 volt pulses to desulfate a battery.
Function is same
Hi bro..what type of battery mode should i select...for this yokohama MF 😊
Depend on battery condition,Pulse Repair Mode : if Battery status below 10V just push the repair button , it will repair till auto stop . ( 5- 24 hours )
At what Amp should I stop charging at? It's gone from 3.1 up to 5.8..
Better to stop after display “FUL” appear on screen
@TonaziTube NEWBIE.....So iv just realised it's the VOLTAGE I was suppose to be following...
Now it says FULL
This device is LEGIT
@justinjames3760 ✅
Normally pulse repair mode how much time needed battery is full? 60ah battery
Pulse repair normally depend on battery condition.Can’t advise on that,Sorry 🙏🏼
So it can be use for ebike battery 12V 22ahm
You can use it but may take a long time to fully charge for 22 Amp
what type cars can i use to jump its battery please?
Most of the car model support to use which spec 4 to 100Ah.
Can support for motorcycle charge?
Yes !Support for 12V Battery for car and motorcycle
thanks for sharing
Welcome
It says full charge but battery failing load test. Why?
Your battery might be a problem.
Hello
12v 60ah 510A battery I need recharge
Which mode is better?
Normal mode or pulse repair mode?
Which is correct
If battery still in good condition (not totally dead),pls select normal first.
Ok
One more question
If I select pulse repair mode, how to identify battery is full?
If display labelled or not?
FUL will appear at display.If battery worst case,it will not display....
Okay
Normally pulse repair mode how much time needed battery is full? 60ah battery
Nice🙂
Thanks for watching
Do i need switch to normal charging after pulse/repair charging ?
No need to switch to normal.
Them why did you pressed it
Change to Pulse mode or normal mode
How long repair mode for motorcycle battery?
It depend on battery condition….some may take above 3 hours….to recovery
Kya 40amp. Battery charge hoga
This charger support 12V 5 Amp
@@TonaziTube maine pucha kya 40ah ki battery charge hoga
@animeshsingh2146 yadi baitaree kee reting 40 empeeyar ghante hai, to 5 empeeyar ka chaarjar upayukt hai. adhikaansh aiv baitariyon kee reting 50 amp ghante se 70 amp ghante ke beech hotee hai, isalie aap 4 se 7.5 amp vaale chaarjar ka upayog karana chaahenge.
@animeshsingh2146 If the battery has 40 amp hours of rating, a 5 amp charger is suitable. Most EV batteries have between 50 amp hours to 70 amp hours of rating, so you'll want to use a charger with 4 to 7.5 amp.
How much ?
Online price around USD8
How do I know when it s fully recovered?
When Display appear 'FUL'
Can I charge 12v 40 ah battery
Battery range: 4-100Ah(12V)