As soon as I heard the intro at 0:08 I knew I should start considering more things when figure collecting. But when I saw that Ultraman figure I KNEW I came across someone with good taste!🔥
I had set up my Legacy Power Rangers figures on my high shelf, and Kimberly fell off the shelf TWICE! Even after I had put her in a normal standing pose with her power bow shooting! Figure stands are absolute life savers for collectors!
What would be the best stand for the marvel legends? Kind of new to collecting figures so I can’t tell if I need to get a heavy duty one or just grab the neca stand
Be careful if you are you are using a stand to support a figure that’s on the heavier side especially if it has a lot accessories attached or has any die cast as I used the figurarts stand configuration at 24:03 for my sh figurarts mark50 iron man with several add on parts and and it snapped apart due to the weight.
ok, so i have Power Rangers Lightning Collection figures and one thing Power Rangers is known for are interesting, dynamic poses. Say I take the MMPR Pink Ranger. if I were to have her in the air, aiming her bow, which stand would you recommend?
Hi Steven! Love your channel, I need some help picking out a stand for the big Banpresto Giratina you reviewed, i purchased it without a stand and need guidance, do you think two stage 4 stands will do the trick? Help me out plsss
Good Smile Company just released The Simple stand which is basically a figma stand arm with a square base and has a claw included along with the extender thing. It's about 10-17 bucks depending on where you buy.
Although I only use Tamashii Stage Act stands for my GunPla, it stands out great and sturdy as it is until now especially on my HG IBO models (including the Reginlaze Julia and the Hyakuri)... This video anyway is useful for choosing the best stand to recommend not only for figures for GunPla as well regarding of its sturdy structure and robust arms that can hold the model in the long run....
Why is it when the second i wanna join the Discord i can't find any link to it anywhere even tho I been going video to video I thought Steve would mention the discord and put down the link
Hey Steven, thanks again for the helping hand, but Im still a little on the fence for a final decision. Im trying to decide which stand I should use for an 8" NECA Predator, hes a pretty heavy fella and my cats love running by the display cabinet and knock him over. Do you think the claw on the neca stand would hold a tight enough grip on him to keep him from falling over and over like a fool who thought he could outdrink Ahnold?
I'm glad you used a Ninja Turtle for testing the NECA stand because even though my Splinter will be fine since he's super short, I also wanted to do some airbourne poses with the Turtles who are a bit heavier, thanks!
Hello Steve. Thank you for the video. I'm having a problem with a stand, where the claws come loose. I'm trying to tighten the screw but still gets loose. Is there any way to fix that?
So I’m interested I getting a stand for my new Pac-man figure so that I can display the ghost with him, I’m not knowledgeable about this stuff so which stand would you recommend?
I ought to get bases for my Star Wars figures…living near a stone quarry means the house can shake from blasts. I’m currently looking for something to support a couple dinosaur figures with loose joints
I use the Obitsu AC10 stands for my SHF Star Wars; usually find them for $22-$25 on amazon for a 5 pack. My stand of choice. The NECA stands were crap. Haven't used the SHF act 4 stands yet and may pick one up sometime. Thanks!
Interesting to find a video that Justin's Collection did not do. Very informative and top of my search results when I searched TH-cam. Thank you for the help.
For the figuarts TMNT figures, would the Act 4 stands be able to hold them if you tighten them? Really wanna pose them but they are much heavier with their die cast parts
I bought two Tamashi stage act 4 stands and the holes are too big for the base so the support arms are super wobbly and the clamps are loose and fall out. They aren’t that great for Marvel Legends I presume sadly or I unfortunately got a bad set
@@StevensToyReviews okay thanks, I don't have a broly yet but I placed an order for the dragon Ball super movie broly and I wasn't sure if he came with one like the previous releases of broly did.
My figma support stand broke at the bottom and I can’t fix it AAAAAAHHHH
This video was really helpful, I’ll definitely be picking up some new stands in the future!
This video is amazing. Thank you for this. Im new to collecting and posing them
Hey,.glad you enjoyed it and hope it helps! Stands are essential so don't feel bad about buying several.
As soon as I heard the intro at 0:08 I knew I should start considering more things when figure collecting. But when I saw that Ultraman figure I KNEW I came across someone with good taste!🔥
I had set up my Legacy Power Rangers figures on my high shelf, and Kimberly fell off the shelf TWICE!
Even after I had put her in a normal standing pose with her power bow shooting!
Figure stands are absolute life savers for collectors!
My only complaint with the act 4 Tamashii Nation stand is that the claw has a loose fit around characters like Mewtwo, Goku, and Naruto.
Not a genius with this stuff. I just want to know what would be a good universal stand that also works for heavy toys like masterpiece transformers.
1:34 the one on the left can support heaven figures
What would be the best stand for the marvel legends? Kind of new to collecting figures so I can’t tell if I need to get a heavy duty one or just grab the neca stand
Be careful if you are you are using a stand to support a figure that’s on the heavier side especially if it has a lot accessories attached or has any die cast as I used the figurarts stand configuration at 24:03 for my sh figurarts mark50 iron man with several add on parts and and it snapped apart due to the weight.
thank you so much im trying to make stop motions but needed stands to keep my figures!😁
Me too!
Same
Good luck on your animations, it's really fun
same
Same for me
How good do these hold transformers?
Great video, I always have trouble with stand never new there was a difference. Thanks for the insight man
Thank u for the this.I finnaly also know what this is called.The support stand.Thank you
I only have 1 stand, I got it from the S H Monsterarts Evazilla.
Anyone know where to get good stands in 2021? These are pretty much all gone
ok, so i have Power Rangers Lightning Collection figures
and one thing Power Rangers is known for are interesting, dynamic poses.
Say I take the MMPR Pink Ranger.
if I were to have her in the air, aiming her bow, which stand would you recommend?
Hi Steven! Love your channel, I need some help picking out a stand for the big Banpresto Giratina you reviewed, i purchased it without a stand and need guidance, do you think two stage 4 stands will do the trick? Help me out plsss
Tamashii is horrible the claw thing always crack i bought 2 already. Want to try obitsu since its a screw instead of plastic
Good Smile Company just released The Simple stand which is basically a figma stand arm with a square base and has a claw included along with the extender thing. It's about 10-17 bucks depending on where you buy.
Although I only use Tamashii Stage Act stands for my GunPla, it stands out great and sturdy as it is until now especially on my HG IBO models (including the Reginlaze Julia and the Hyakuri)...
This video anyway is useful for choosing the best stand to recommend not only for figures for GunPla as well regarding of its sturdy structure and robust arms that can hold the model in the long run....
Why is it when the second i wanna join the Discord i can't find any link to it anywhere even tho I been going video to video I thought Steve would mention the discord and put down the link
For tiny screws like these stands, an eyeglass repair kit or watch repair kit are good options for tiny screwdrivers.
I got an obitsu bulk pack, wont stay in the air, broke 3 already..
I have NEVER seen tamashi nations stands anywhere in the USA. These stands elude me completely.
They're available online!
Hey Steven, thanks again for the helping hand, but Im still a little on the fence for a final decision. Im trying to decide which stand I should use for an 8" NECA Predator, hes a pretty heavy fella and my cats love running by the display cabinet and knock him over. Do you think the claw on the neca stand would hold a tight enough grip on him to keep him from falling over and over like a fool who thought he could outdrink Ahnold?
You probably already bought a stand but (btw I dont have a stand so its probably incorrect), but I would say neca.
I can’t believe that Bandai has the best value by far out of all of these
You can have a cat or action figures, but never both. 😂😂😂😂
I need one strong enough to hold up the likes of Sh figuarts Broly
So basically just get the Neca ones 😂
what if im trying to pose broly full power🤨
I’m trying to find a stand for transformers stop motions
Probably gonna need the act 5 because most of my custom figs aren't hollow so they are heavy(even something as small as my mothra)
I bought some stands but they are so lose they can´t even hold my action figures.😢
What stands did you get and are they real or bootleg etc....
This was so very helpful, thank you very much!
i fucking love you nh
Make someone T pose in the air
Thanks dude. I'm getting 2 dbz figuarts figures. I'm getting saiyan raised on earth Goku and ssjb move Broly Goku. Then 2 stands.
I'm glad you used a Ninja Turtle for testing the NECA stand because even though my Splinter will be fine since he's super short, I also wanted to do some airbourne poses with the Turtles who are a bit heavier, thanks!
Does It fit in SH Monster arts Kong? (2021)
Love ur videos👍
Hello Steve. Thank you for the video. I'm having a problem with a stand, where the claws come loose. I'm trying to tighten the screw but still gets loose. Is there any way to fix that?
So I’m interested I getting a stand for my new Pac-man figure so that I can display the ghost with him, I’m not knowledgeable about this stuff so which stand would you recommend?
I ought to get bases for my Star Wars figures…living near a stone quarry means the house can shake from blasts.
I’m currently looking for something to support a couple dinosaur figures with loose joints
*How are migavan?*
Do they make any for 1/18 scale figures?
It's good for stand of action figure.
Which of these stands would work best with sh rathalos
I use the Obitsu AC10 stands for my SHF Star Wars; usually find them for $22-$25 on amazon for a 5 pack. My stand of choice. The NECA stands were crap. Haven't used the SHF act 4 stands yet and may pick one up sometime. Thanks!
Can any of these hold the weight of the sh monsterarts heisei mechagodzilla
Came to this after destroying a stand that wouldn’t go together
what would be good stand for robot spirits evangelions?
I was wondering which is good for spawn action figures stand
Thank you I need better stands for my action figures
Thanks so much I have sh figuarts of dbz and I didn’t know how to build it.
Do these stands work for transformers figures?
Is there one I can get for stop motion and for heavy figures
I use the Neca suction cup thing to hang figures from the tops of glass shelves, haven’t had one fall yet
Would these work with wwe figs??? Thanks!!!
Im probably gonna use the neca stand (I have bandai mothra and it looks rlly heavy). I might get more stands in the future doe :D
Interesting to find a video that Justin's Collection did not do.
Very informative and top of my search results when I searched TH-cam.
Thank you for the help.
THANK YOU SO MUCH FOR THIS VID 🙏🏻
Hey Steven do the tamashii act 4 and 5 work with sh monster arts effects and weapons sets
Yes
What’s a good stand for Marvel Legends?
please answer
Try 3x3mm magnets in the feet. Works well.
For the figuarts TMNT figures, would the Act 4 stands be able to hold them if you tighten them? Really wanna pose them but they are much heavier with their die cast parts
Would you be able to find out if the super Tom NECA support stand will hold the sh MonsterArts Rodan?
All the support stands work fine.
It must be the work of an ennemy stand !
can they hold the neca king kong?
goku is just... V I B R A T I N G
Can you get some of these at Walmart
Which is the best for normal AND bulky figures?
Tamashii stands I would say if you tighten the screws.
18:56 asmr by steven
I bought two Tamashi stage act 4 stands and the holes are too big for the base so the support arms are super wobbly and the clamps are loose and fall out. They aren’t that great for Marvel Legends I presume sadly or I unfortunately got a bad set
Hmmmmm the official pack? And holes too big for the base?
So would Stage 4 be best for SHF DBZ
Yes
You helped me a lot
Thanks for the great and informative video!!
What scale are the Stands?
I WILL HAVE THEM ALL!!!
Will this work with Gunpla?
Yeee
What's a good stand for a s.h. figuarts broly? Would act 5 be good? All the clamps look too small.
Well he comes with one! And the Obitsu one comes with multiple types of claws so I'd say that's good.
@@StevensToyReviews okay thanks, I don't have a broly yet but I placed an order for the dragon Ball super movie broly and I wasn't sure if he came with one like the previous releases of broly did.
OH Super Broly. Yeah, any stand should be good, he's got big enough feet and strategic placement on the torso should work fine.
👍
Great video
Got a green goblin shfiguarts. Need a stand for the glider, ACT 4 stand is what I need ?
That should work! Or the new humanoid ones.