How to: Remove Toyota Pickup Truck/4Runner Door Panel
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Today I'll show how easy it is to remove the door panels on 1984-1988 Toyota Trucks and 84-89 4Runners. These back of these door cards are made of cardboard, and it gets brittle with age and moisture. Using the right tools for the job can help prevent damage to these old panels.
Here's a link to the tool kit I used: amzn.to/33x7D5E
The Vent Window Conversion link: • How to: Toyota Pickup/...
Here are some other Toyota videos you may find helpful:
Remove an Entire Toyota Rear Axle Assembly: • How to Remove an Entir...
Install/Upgrade to V6 1" Master Cylinder on 4 cyl Toyota: • How to Install/Upgrade...
Install Toyota Rear Axle Bearing, Oil Seal - WITHOUT a Press: • Install Toyota Pickup/...
Replace Toyota Drive Shaft Center Support Carrier Bearing: • DIY: Toyota 4x4 Drive ...
Trail Gear Hi-Steer install: • Trail Gear Hi-Steer in...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Fixing Floor and Rocker panel rust: • Fixing Floor and Rocke...
Remove Headliner in Toyota Pickup Truck: • How to: Remove Headlin...
Remove Toyota Pickup & 4Runner COMPLETE Dash: • How To Remove Toyota P...
Toyota 22RE Engine Teardown: • $100 Toyota 22RE Engin...
22r Compression Test: • How to: Compression Te...
Remove Toyota 22RE Engine & Transmission: • Remove Toyota Pickup T...
Toyota Pickup/4Runner Vent Window Conversion: • How to: Toyota Pickup/...
Remove Toyota Truck Rear Glass Window: • How to Remove Toyota T...
Toyota 4x4 Transfer Case Rear Flange Oil Seal Replacement: • DIY: Toyota 4x4 Transf...
Replace Pinion Oil Seal in Rear Diff: • How to Replace Toyota ...
The Vent Window Conversion: • How to: Toyota Pickup/...
Remove Door Panel: • How to: Remove Toyota ...
LED Headlight Conversion: • How to: Install Toyota...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Breaking a Rusty Toyota Frame in Half: • Breaking & Cutting Up ...
Remove & Install B-Pillar Trim Covers: • Toyota Pickup/4Runner ...
Toyota Pickup Fiberglass Bed Review: • Toyota Pickup Truck Fi...
I don't have Patreon or ask for donations but you can support the channel with some rad Yota gear from my store: 6thgeargarage.c...
Follow Us:
Instagram: 6th_gear
6thGearGarage
PERFECT TIMING for this video! I'll be doing this on my vent window door swap this weekend. Thanks!
I'm guessing those are Western Wheels on the 87.
Thank you very for all the info on this video.
Question, what seats would be a bolt on upgrade to a 1986 xtra cab long bed?
Restoring the truck and looking for what will fit.
Thank you.
Aside from seats from another truck from the same generation, there are no seats that I'm aware of that would be a direct bolt in. I've seen mustang buckets, celica buckets, tercel buckets in these trucks and they all needed to be modified because only one or two of the holes lined up. Even if you go from bench to OEM buckets of the same generation truck, I believe the floor will still need to be modified to accept the inside rails of the bucket seats.
@@6thGearGarage Thank so very much. Really appreciate all the help and unfo.
Great video
Hello, Ok I have the Same Color Tan Door Panels!
How are your so How are yours so pristine and Mint condition?
I would Love a Tan Set in the Shape!
for my 85 Extra Cab SR5 4x4 22rec
Thank you
This was an Ohio truck so it wasn’t exposed to the harsh sun that the southern trucks get. That helps to preserve the interiors. Instead our frames, beds and cabs rust through from the road salt in winters.
@@6thGearGarage There is No way in the World thats Stock Interior! Sorry No Way..
My Truck doesn't have all that rust Like ASSume it Might.
So I should have Like New Door Panels also Then.
Some upholstery did them and you all dont want to tell us the Color.. Its All good No Worry..
John M The interior is original as far as I know. These trucks rust so fast here that they can look horrible outside and nice inside. Maybe the previous owner refinished the door panels, but I have collected a few nice sets of door panels from rusted out cabs over the years.
Can you tell us more about that gauge cluster on the dash? I need to do something about my gauges. Been thinking about that very location. Thanks.
It's a factory option called Inclinometer. has forward and sideways tilt gauges and also an altimeter gauge. You can find them used on ebay, but they're pretty expensive.
@@6thGearGarage Thank you for that, also for doing your channel👍
Question. Got a 90 4Runner with power non vent windows and I’m wondering if i can keep the electric motor equipped when I swap to the vent windows?
1990_4Runner the vent Window doors use their own regulator. Most of them are manual. Power was a rare option but I don't know how the part number for the power regulator. I've never tried takimg a motor and attaching it to a manual regulator, not sure it can be done.
Helpful - I am removing my rear door panel because the locking mechanism is not working. The button will not stay down even after I close the door and push it down from the front door. Do you have any advice of what to look for?
What kind of vehicle do you have?
@@6thGearGarage 89 4 Runner. Thanks for replying - I worked out how to get the door panel off. Now to work out how to fix the locking system. The button keeps coming up and unlocking.
Do you have a ebay store? I am looking for a passenger brown ac vent. Great videos they have helped me alot thank you
I do, but I don't have any vents. They're hard to come by because they get so brittle that they crack easily. The passenger one is always the worst when it comes to breaking.
Oh when you're shopping around, note that there are 2 different designs of passenger vent, depending on your dash. I believe 84--85 vents are different than 86-88 on the right edge. The 86+ are recessed in the dash while the 84-85 are flush on the right edge.
hi . i hav a 96 Toy 4runner... can i remove the drive shaft going foreward [2 the front axel]
w/out causing any problems ??? I'll never need/use the 4wheel option.
You can but, why?
Yeah, it won't cause an issue. Just mark the position so if you re-install it it won't be 90° or 180° off and cause vibrations.
Can you show me gie to remover the AC system completely with all the major components
I have some video of all the compoments out of the truck and some being removed. I will put together a video soon, stay tuned!
Any idea on where to get those led panel conversion lights? Thks..jc
I think they may have been custom because they didn’t fit well, just real loose inside the plastic cover.
Ok, thks very much..jc
i have a 1985 toyota pickup, with the vent window. i’m looking to get new door panels that wrap around the top by the window. have any idea where i could find some new ones?
On these panels, the only difference is that the rubber trim strip that attaches to the top of the door panels goes all the way across for non-vent windows and uses a shorter trim strip for models with vent windows. The panel itself would work on either type of window setup.
What model are those door panels that have the electrical controls?
Those are from a SR5 with power windows & locks.
Еще поездит!
अरे कहेना क्या चाहते हो
Ant believe that thing has electric windows. Mine don’t.
Marlon Fuller I’ve had 8 of these trucks and only one of them had power windows.