Harley Davidson Springer Cross Bones - Bringing her back for Daytona Bike Week!
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Harley Davidson Springer Cross Bones - Bringing her back for Daytona Bike Week! To get the Springer Cross Bones ready for Daytona I needed to put some fresh rubber on, and finally get the slick @paughcoparts9816 pipes on I’ve had for months. Finally, a proper base tune from the @DynojetResearch PowerVision I’ve had for a bit. We’ll do an autotune on it this week, change the rear brakes and give her angled change, then Mrs. Monkey’s bar hopper will be ready!
#harleydavidson #springer #crossbones #chopper #tires #promonkeynation #daytona #bikeweek #sturgis #smokeout #dunlop #dunloptires
![fellow fellow - PROUD feat. INK WARUNTORN [STRING QUARTET]](http://i.ytimg.com/vi/BQrVkMPTdHE/mqdefault.jpg)
I did garage yoga this weekend, too .
Changed rear brake pads, added CD fairing chrome vent trim, installed my new custom license plate and did the season opening 3 hole change.
Tuesday I get a new front tire and Progressive front springs installed at the shop and that completes the prep. I'm ready to roll 😊 well, have to break in the rear pads but that's just to satisfy my OCD 😂
The Mrs did a great job with the pipes in particular as she looked somewhat hung over 👍🤙🤣
We were hurting a bit…
I have 1 1/2 Factory 47s on my 2022 Road Glide and the bars lock correctly.
I have them on my 17 UC and no problem locking the bars
I've got a 2008 Springer CVO and those pipes would be SICK on my bike! Hahaha Thank you for the idea! Man great choice!! Thank you for sharing! BTW, your lady is wicked cool to be wrenchin like that, you guys rock! I hope u guys have a great time and safe trip to Daytona!
Make sure they fit! I think the CVO had a lot of little differences??
Def. My favorite bike of the bunch!
Same!
Look at all those TRKES in the background at the 6-minute mark...love it .
Will be watching for you in Daytona!
New exhaust sounds nice and snarly. Alot like my 13 Wide Glide after Stage 2.
Got you beat ... my 1200 Sportster, It's a 06 and still has the original front tire. Yep ... I'm going to change it..... it's my in-town bike.
Those pipes sound amazing on the video. Can only imagine how much better they sound in real life. 🤘🤘
Good choice for pipes 👌👌LLHR greets from good old germany 😎🤘
🛑🛑 I like how those pipes “cackle” between gear changes. 👍💯
Last year walked in my local dealer to see a bike I saw online hated it , talked to the salesman and he said I have something for you.. walked to the used section there she was , 1992 fatboy traded in from the original owner. Man I love that ole evo❤
Ooooooo, that’s a winner!
The neighbor was f’n hilarious!!!!😂😂😂
That’s Ted next door. He’s a great guy.
Love those pipes! I think all springer and heritage look best with fishtails.. bad ass
Digging the upsweeps
I 100% agree about tires. They are the most overlooked thing on motorcycles in my opinion. I run Michelin Road Classics on my bike. They're a little pricey, but worth it for the amount of grip, comfort, and handling that they provide.
Liked the framed poster on white bike …. lol … its going to look good in your collection
Waiting to move
Everything so the big Christmas present can go up!
I'm watching this at work on Monday and had to pause because work and unpaused at about the 3:00 ish mark and head the following "the nipples and it's kinda hard" and I fell out of my chair laughing because I forgot Pro Monkey was talking about spoke wheel tires
Man it would be fun to have a drink or five with you and talk about riding in Florida. Will be at Daytona Bike Week
Love to see you Both Wrenching on Bikes
Man that looks so damn good. Fits the classic look and just also a fan of fishtails. Hope yall do some more videos with this bike.
Picked up a 2016 Slim s back in Dec, and was thinking of swapping to similar pipes as these, think samson or freedom performance vice the D&D 2-1 fat cat. But found out it's had some decent upgrades internally to pistons and cam/plate and pump. I'm slowly liking the look, but love the sound and ride.
Love my M8 114 Roadglide, but missed the twin cam.
Awesome time, and yes you should have filmed wife with the black all over her face.
Your wife is a good sport and likes bikes. Lucky man.
❤❤
Really like the pipes
Makes me happy to see the poor neglected springer getting some love! Put a heritage rear fender on it
Love the new pipes. I agree they are unique.
You guys are in great form on this video! The boys in St. Charles would be proud.
!!!😂😂
Looks and sounds awesome!!
Glad you threw that in about the 1.5 inch handlebars. I put the khrome werks buck one fifties on myself and was wondering why the fork lock was a lot tighter. I can put the key in and turn, but it doesn't want to come out or go back in from the lock position.
i'm a Huge Fan of the 2008 model year, and i fell in love with the cross bones when i 1st saw one, SADLY i've never owned one, but someday maybe i'll find a used one, but having owned 5-6 TC88, and a couple TC103, i'm a HUGE FAN of the TC96 why i own a 2008 Road King, the 88 was a great motor except for the cam chain tensioners issue, the 103's were noisy and i hated the electronics in them, and the 96 just works for me, my life with Harley Dealers i've owned em all since my 1st harley in 1973 (an SX125) my 08 is my favorite.
There's something special about the 96, I don't know what it is.
Excited to meet you and the Mrs. At Daytona. It will be my first long distance ride with the husband.
Right on!!!!
❤❤ 😊awesome! Ride safe and swing by the Cackleberry and we”ll celebrate!
Looking forward to Daytona this year.
My Alexa reacted to you all the way up here in the great white north!
Wow great bike bro! I absolutely luv it! Nice vid to thx
Love your channel keep up the great job
Awesome and thank you
You bet
You know what... if you chop the bucket off and that back frame, shorten the pipes, throw a nice brown solo seat on it, and a big chrome front tire like between a 26" to 32" on the Triglide, paint it candy apple green with some gold flake and some silver pinstriping. Would look sick. I'd call it The Leprchaun.
So good. Sounds amazing despite recording never doing pipes real justice.
Lots of your buddies channels have great info about working on bikes, as you do too. BUT.....I don't think I laugh near as much watching them. Between you, the Mrs. and Old Man Monkey, there's always great laughs. See you in 2 weeks, if all goes well
Mama Monkey looks bad ass on the cross bones and the pipes look and sound awsome,I just sold my 05 heritage springer,god I miss that bike,but I got a 2019 heritage classic,I love it but I miss my springer,hopefully I will see you in daytona,I will say hello
❤❤
Even with that base map it sounded good
I second the bobber motion. Chop that rear and remove that front fender. Almost gave my wife a heart attack this morning...he did a crossbones video!!. She was not amused 😂😂
😂😂
I have Factory 47 bars on my 2019 Road Glide and I don’t have any problems locking them 😮
With all the boxes, I imagine your trash pick up people just love you. I glad I live in a rural area to where I can burn all the boxes we get!!
OHHH that sounded AMAZING!!!!! YUCK !!!! on the HOA's I enjoy country living too damn much to put up with an HOA and rules!
Trikes....4 bolts in bottom of trunk and 2 up top behind the seat. Pull the wires and lift and unhook the rear.
springers just RULE! NICE!
In a world full of baggers.
Tyres have become expensive fast, last year I got a 90/90 21 and a 130/90 16 Shinko 777's for my Dyna just under $400 AUD, $260 USD, I put them on myself and considered myself lucky compared to some later model wide tyres and ratings, but $772 USD is $1179 AUD bloody hell mate I hope you can race on those!!
Bike looks sick ✌️🔥🔥
I put a fatboy rear fender on my 08 nightrain really like that look better than the fender that was on them
Can't go wrong with Coming To America.
So I bought a 2011 Victory to ride to Sturgis this past year and left with a good tire and got to Sturgis with a bald 2013 wrong tire for the heavyweight bike so I guess the moral of the story is make sure you have the right up to date tire before you start out
Arrr man great video mukka
I have Samson Cholo dual fishtails on my 08 crossbones. I love the old school look..
But I also have a set of Samson Sidewinders that I'm thinking of putting back on...
But then I'd need to take off the bags I just bought last year...
Hot damn I love springers. This is a great bike !
Tell Carlos to get it to lock you have to remove the plastic ring underneath. i had the same issue on the 2021 Road Glide Limited i recently from San Jacinto Harley in Houston.
it will lock after that .
I have factory. 47 on mine and mine locks just fine
Why is it Mrs Monkey is the only person we actually see turning wrenches on this channel 😅😅😅😅😅
😂😂😂
Leave the duck tail fender on there! I wish Harley would have never changed them on the Wide Glide or the Softail Customs, etc
I miss the sun
Your wife is a Hoot. 🙂 would like to see her on a little more often.
Me too!
I see you finally decided to film the mechanic that does all the work "behind the scenes ". Lol
😂😂
I’m so glad to hear you address that stupid looking rookie looking thing of dragging your feet! It proves they aren’t ready to ride on the street.
Also, a Road Glide Special weighs 850 lbs. That’s running weight.
Some of the FXSTCs had spoked rear wheels.
They did? I thought they all had dished slots?
Tires...Amen brother 👍☕️☕️✌️
Cool 😎
I have an 01 sportster 1200c that has 16k on it I had it gone thru have to get a new gas tank I have a paint I want put on it everyone says they can but when I see the work it’s falls pretty short of I want bit more “ corpsman related” so I wanted to do it right “ caviar taste with beer budget”. I will have to save up.
She might irritate your neighbors just a little bit😂😂
I bought a Sportster model 72. They said it was serviced and had a million point inspection. All lies.
All the spokes on the rear wheel were loose. Someone had been riding it that way and elongated the holes in the hub. No service had been done either.
you need to invest in a rabaconda tire changer as many tires as yall go through
I’m so jealous you have a crossbones
I figured you put. MRS.M9NKEY is the hired mechanic. Great video.
Dude, it’s like a Scoobie Doo episode…. “And I would have gottten away with it if it weren’t for you meddling kids!”
@@ProfessionalMonkey Haaaaaaa HAAAAAAAAAA
😂❤
❤
Mrs. Monkey looked totally bad AZZ riding away on the springer!!!!
Don’t let it out of your sight while you’re down there someone will steal it
The only bike that is always locked.
❤❤❤
Hello, so I am not sure how anyone has not noticed this yet but in the video just before TJ tunes the bike I noticed the new Meta Rayban glasses case on the table/containers your stacking stuff on. Are you using those to film some of your videos on??????
Just ride stuff for Instagram. They will be cool for rallies also.
You actually paused my TV when you asked Alexa to pause 😂
😂😂
😂😂😂
😊
Mr Monkey. Just to clear up the comment regarding the 117 in the 2024s, it is not the same motor. The 24s have different heads, and throttle bodies than the 23s. The liquid cooling is also redesigned to cool the rear head first.
Twin cam 88 right? How did you like? Daytona went there once was very disappointed. Nothing like Curtis very small compared to Sturgis not much riding in the area neither
Yeah, Daytona sucks but it’s a good chance to see my friends. The Cross Bones is a TC96, my favorite Twinkie. Sounds better than the 103 somehow.
Thats ok because its a twin cam and you should be trading it in for a m8 .
Trade in the crossbones?? Nope! She’s a keeper.
@@Mrsmonkey5151 Thats how i feel about my twin cam . New bike in 2025 never first year of a big change lol .
23:09 I am lazy. Maybe the programmer should have a 10 second delay off. That way when it goes 'off' you can turn the bike back on and go. No counting in my head or looking for a time piece.
Those pipes make that bike look perfect... You had said you're selling the cholo bike. When and how much?
Mr. Monkey, I love your content!! And the way u banter with your wife. I wish my wife was Into Harleys. There is nothing like working on a bike with your better half, I imagine!!! But u should have left the soot on her nose for at least 10 minutes then said there's shit on your nose on camera lol!!!
On my z1000 the front tire never gets oder than 3 years. Backtire new every year.... for 250kph madness on the german autobahn you need good rubber.
On normal bikes you dont go faster than 160 kph.. 5-7 years is ok..
On the squarebody the tires should hold air..lol..
Looked for his channel...
No luck....
No Link
Harley Home ?
Search for it, but change the search terms to channel name
Me too
Here it is
@@HarleyHome already Subbed ya 👍👍
Does the swingarm bag have some kind of mounting bracket,
Just straps. One of the clasps was broken so we trashed it.
Awww you guys are so cute..
waiting on the day with AI and Alexa replies with..."Oh Hell no! Make me"
5 to 6 on my diesel cause its onpy had 20k in 3 years
4 years on trailer
Stop screwing with MY Alexa......lol
Have you used thundermax tuner? If so whats your opinion since youve used both tuners or could you do a video on both
Bad ass biker @mrs monkey
❤❤
Hey monkey just a quick question I want to ask. I have a 107 with a 475 cam now I bought the power vision 3b I believe this summer I’m thinking about having get lowered cycles do a 124 big bore kit do I need to buy another power vision or will the one I have now work? Any advice would be greatly appreciated. Great video BTW. that crossbones is my favorite in your collection
Is that the PV3? What's your thoughts on the PV4?
And...
How rude... Im a member (a biggun)
But my comments are misplaced 😂😂😊
They are? I see you!
@@ProfessionalMonkey haha
You keep getting bikes your going to have to lease a warehouse
I bought an 2013 RG ultra 8 months ago, 15k miles on bike , original tire , NOPE, I ain’t riding on it
How tall are those bars? I don’t have a crossbones, but my 09 fat boy has a Mid America springer front end. I like how yours look.
Those are 16"
Can you tell me what taillight you placed on there? I have an 09 crossbones and I am converting over to full LED, and he smoked lens would look great on there.
Custom Dynamics makes the tail light.