This is one of the first tools I bought when I first started riding and working on motorcycles in the 70's. The way they tighten those Phillips head screws at the factory, Its tough getting them out without stripping the head. Done right, these loosen them right up with one hit.
I came across one of these tools in my dad’s old garage. I looked at it, saw came with heavy duty bit set and it itself felt heavy. Had it for a few years before researching and discovering how to properly use it. Neat innovation for its time, especially since I grew up in a time of powered impact tools and 18/ 20V cordless impacts were improving and becoming standard by my adult life.
@@ballbby3775 i'd guess it creates greater tension in the direction you want to turn the screw in, so when the screwdriver turns it is more likely to be able to turn
My father has had one of these for almost 40 years. My one of my best friends who was a mechanic, got tierd of him constantly borrowing his, so he gave him one for Christmas back in the 80's. I dunno if he uses as much now that he has a pneumatic and electric impact driver.
@@toolsforwork something wrong? the tip of the screwdriver is meant to match the screw dummy. you have a screwdriver that is way too small for the screw like a true genius.
Ну автор, ну красавец, никто ж не знал, что есть ударные отвёртки, и ими, оказывается, если крепление резьбовой закисло, или заржавело, то, можно откручивать, и закручивать, кстати...
а так же что ударные отвëртки от части предназначены для крутящихся механизмов, с которых болты и гайки открутить не так то и просто. ну а если автор данного видео читает этот коммент, то посоветую тебе обзовестись ударным гайковëртом который будет надëжнее данной отвëртки.
Тут руками открутить можно Объясняю почему Все потому что данный болт не несет никакой нагрузки он всего лишь держит вилку втягивающего реле А болты те что на статоре да но бывают такие ситуации что только высверливать А это так детский сад 😊
Hab meinen noch aus meiner Lehrzeit seit fast 50 Jahren. Alt aber gepflegt funktioniert immer noch wurde schon oft gefragt was ich mit dem Schrott will aber als es funktioniert hat wurde das Gerät bewundert.
First short ive seen showing off a tool used correctly
Like it?
@toolsforwork I think I've got one somewhere, I just haven't had an old rusty truck in a while so I haven't really needed it
I've had one for over 30 yrs. Been beat to crap but still works great.
is a useful tool.
What is the brand name for that one?
@@joshuatozier2846Rodecho/Rodexho
This is one of the first tools I bought when I first started riding and working on motorcycles in the 70's. The way they tighten those Phillips head screws at the factory, Its tough getting them out without stripping the head. Done right, these loosen them right up with one hit.
Thank you for your introduction.
a
a
Aaron
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
I came across one of these tools in my dad’s old garage. I looked at it, saw came with heavy duty bit set and it itself felt heavy.
Had it for a few years before researching and discovering how to properly use it. Neat innovation for its time, especially since I grew up in a time of powered impact tools and 18/ 20V cordless impacts were improving and becoming standard by my adult life.
Thank you very much for sharing
The real genius is the person who designed it with a flathead instead of a hex bolt
😂
You change the heads 😂
I still have my original snap on. It was 20 bucks back in the day...still works great
Yes.
Hit it with some WD-40 first
WD-40 is not a panacea.
You need to research WD40.
investigate WD40@@griffiom1
@@griffiom1who?
@@vfrtom9669you
Penetrating oil day before is very helpful 🤔
?
Современный и качественный инструмент увеличивает производительность труда в разы!
YES!
Commercial for Temu, 1.88$, thing will fall apart first wack
Not all are of the same quality
shop like a millionaire
Excellent tool for its purpose
Thanks!
Перед открытием не видно следов легендарной WD-40.....
WD-40?
@@toolsforwork прикалываюсь. Ей везде поливают в таких делах....
ရေစွတ်ပေးရင်လဲ ရပါတယ်။
ရေစွတ်ပေးရင်လဲ ရပါတယ်
Đồ chuyên dụng có khác vừa nhanh lại hiệu quả!
?
@@toolsforworkdung dung!
PARABÉNS, SE FUNCIONAR MESMO SHOW !!
Why doesn't it work?
I like how he used pliers instead of an open end wrench which would’ve done the job 😂
OK
The glove don’t fit
And not even real pliers, wire cutting/splicing pliers. 😂
làm thế nào để một tác động tuốc nơ vít ?
The screwdriver is strong
It's the soft music that caressed it until it came out 🤣🤣🤣🤣🤣
😂
This tool has saved me many times
A tool that can solve a problem is a good tool
A little tip always go slightly tight first then undo.
OK
Why do that? Seem counterproductive
@@ballbby3775 i'd guess it creates greater tension in the direction you want to turn the screw in, so when the screwdriver turns it is more likely to be able to turn
Amazing job!👍
Thank you! 😄
boa, muito boa. qual é o nome desta ferramenta? fala aí.
Impact Screwdriver
Schlagschrauber
I like the music lol
Thanks!
Nice music 👍some other channels bombard with crazy music
Thanks ✌️
Chave de impacto'' excelente ferramenta.
Yes.
Artisan professionnel 😅
😊
You got to use vise grips man you were doing it right
Not necessarily a vise.
His poor fingers
Lol
What happened to the finger?
Free from Certified Labs will do the trick.
Wow.
My father has had one of these for almost 40 years. My one of my best friends who was a mechanic, got tierd of him constantly borrowing his, so he gave him one for Christmas back in the 80's. I dunno if he uses as much now that he has a pneumatic and electric impact driver.
Good tools will always be used
Yes, those are great! I have an old Craftsman one and a newer one made by Vessel out of Japan.
Very cool!
Don't tell me that
This key made by china too 🤣🤣
So do you like it?
Classic tool!
Yes. but very useful
Wow. 👍
😊
Good job 🎉🎉🎉
Thank you! 😃
Old locksmith trick: soak in petrolium or creep oil or heat (expand)...
ok
Put sm machine oil to remove junk or bfor opening screw up
Maybe a way.
no one defeat the impact wrech
Broken Screw Extractor😊
A little penetrating oil would be helpful you think?
Maybe not.
you can see after the two hits, the top of that tool was greatly damaged.
Where?
Да где вы находите эти ржавые шурупы
We have a lot of old machines here
Somer oenetrating oil would ahver helped, too
Really?
@@toolsforwork Social media desperately needs a sarcasm font or other indicator.
👍
i don't think that's ok
Buena herramienta: al golpear giro. Los ingenieros tienen mente privilegiada, en general los humanos, por eso dominamos el planeta tierra.
Humans are good at using the right tools.
Это эксцентртческий болт. Для регулировки Пендикса он плотно не сидит.
This is an impact screwdriver
Бляяя, умнейший... Правильно было бы написать бендикс, да при этом с маленькой буквы... 😅😅😅😅
Looks like an impact screwdriver...
Yes.
為什麼不先噴些WD40下去？
WD40 is not a panacea.
Actually a good tool for getting those pre stripped screws out on brake rotors
thanks for your advice
Si ya sabe que está pegado por óxido, porque no lo ocupa desde un principio????
I don't understand what you mean.
ممتاز👍👍👌
😊
Si lubricabas media horita antes no ocupas el tu super desarmador de golpe 😒
lubricating?
hieu qua
😊
and use the correct screwdriver next time, that helps.
Wow
@@toolsforwork something wrong? the tip of the screwdriver is meant to match the screw dummy. you have a screwdriver that is way too small for the screw like a true genius.
that's an r model mack truck kick you have there. Treat it with respect. Those dude can't die.
OK
How does that even work?!
Why not work?
Ну автор, ну красавец, никто ж не знал, что есть ударные отвёртки, и ими, оказывается, если крепление резьбовой закисло, или заржавело, то, можно откручивать, и закручивать, кстати...
thanks for your advice.
@@toolsforwork Это был сарказм. Но продолжай думать что это положительный комментарий
а так же что ударные отвëртки от части предназначены для крутящихся механизмов, с которых болты и гайки открутить не так то и просто. ну а если автор данного видео читает этот коммент, то посоветую тебе обзовестись ударным гайковëртом который будет надëжнее данной отвëртки.
А не заметили что и ударная то гавно. С первого удара мяться начала.
Тут руками открутить можно
Объясняю почему
Все потому что данный болт не несет никакой нагрузки он всего лишь держит вилку втягивающего реле
А болты те что на статоре да но бывают такие ситуации что только высверливать
А это так детский сад 😊
Delco Remy.
?
Everyone look at the top of the tool when he hitting it😂
You should carefully check whether the screws are loose.
Got a set of milwaukee screwdrivers with the hex shank so i can just drive the screwdriver with a spanner or i could use a socket bit on a ratchet
👍
Who know what is the appliance he work on it?
Impact Screwdriver
@@toolsforwork i mean the device
Thanks
Thanks！
Music please
Horned Flute Chill
Why not use correct screwdriver
What do you think is the correct screwdriver?
Very handy tool had one in my tool box for last 45 yrs
Yes, it works very well.
Same here.
me too....
U can just torch the fire easy 🤣
this is not drilling wood.
What's the name of this tool?
Impact Screwdriver
@@toolsforwork I appreciate it
tool name please
Impact Screwdriver.
@@toolsforwork thank you
Como de llama esa desarmador de golpe
They work great but it's the bits that always break.
😂
Get one at Harbor freight tools?🤔👍
Which tool?
Un peu de dégripant ! un peu de temps ! et un embout plus large !! voilà voilà
?
Buenas tardes dónde puedo comprar el destornillador
Please wait for our online shop to be online.
Guy at work buggered .ine massive blows with a 5lb hammer dipstick
ok
اسم این ابزار چیست؟ What is the name of this tool? Please tell me. 🙏🙏
Impact Screwdriver
Hab meinen noch aus meiner Lehrzeit seit fast 50 Jahren. Alt aber gepflegt funktioniert immer noch wurde schon oft gefragt was ich mit dem Schrott will aber als es funktioniert hat wurde das Gerät bewundert.
thanks for sharing.
❤❤❤❤❤❤
❤
What is the size of bit ? 6mm 🤔
Available in various sizes
Great video 😊
Thanks! 😊
Batendo de marreta tu não vai ter chave por muito tempo!!!
?
Он создан чтобы бить по нему молотком😂😂😂😂🤦🏻♂️
Does force also play a factor in how much it turns, like how hard you hit it, I'm new 😅
Yes, but the impact is not as big as imagined
Which company?
local company.
@@toolsforwork ?
Facom?
Sa mucica tan bella, parese uno de los canticos que alaban a Jehová el Dios verdadero
@@eddygonzalez6820❤❤
Add clove oil.
No need
Pero usa un poco de W40
Wd40 is not everything
Вот в чем проблема слелать под ключь?
The screw head has slipped
Just use WD-40
WD-40 is not a panacea
They should make one with hex sockets
Yes.
It is invented by the American.
Is it?
But all native Americans are died by so called Americans..
Wrong.. Just keep inside your toolbox🤣🤣🤣🤣
Why?
🤔purani yande taja ho gai....👍thnku
?
వైఎస్సార్ కాంగ్రెస్ కోసం మాట్లాడితే ఒక్క ఓటు కూడా వేయ్యారు పవన్ జాగర్త
?
Má to vhaku chtělo by to větší šroubovák nebo jinýho blbce
It's easy to take out now.
Как называется инструмент.?
music?
Nice
Thanks!
Yes couple love
?
Theres a impact screwdriver 😯
Yes
Efficacité....la classe...😮
Yes.😊
, 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👌👌👈
😊
Muito prático essa ferramenta.
Glad you think so too.
ਬੋਲਿ ਉਧਰ ਨੂੰ ਸਬਜੀ ਲਾਇਆ ਹੋਇਆ 50 ਪੈਸੇ ਕਮਾ ਦਰਾਂ ਕਿਹੜਾ ਸੰਗਤ ਦਾ ਦਾ ਉਹ ਡੇਢ ਲੈ ਗਿਆ ਹੁੰਦਾ ਦੋ ਸੁੱਤੇ ਦੋ ਬਈ ਚਾਹ ਦੇ ਪਾਚ ਪੁੱਤਰ ਖਰੀਦ ਵੇਚ ਪਹਿਲਾਂ ਵਾਲਾ ਕੱਢ ਤੇ ਬਾਈ ਸਮਝ ਮੇਰੀ ਗੱਲ ਉਹ 25 ਦਾ ਪੁੱਠਾ ਬੜਾ ਦੂਜਾ
???
By hammering
Yes.
Just use a impact wrench
OK
As a wrench I approve
개폐 되죠 동력원 없읍니까
This tool is not powered by electricity.