Great Design, I modified it a bit by putting a 10 watt, 1ohm resistor in front of the positive lead to the ecig and then hooking up 2 9v batteries in parallel. It does a great job of keeping the ecig from getting too hot and supplying enough power without straining a single battery. I can run it comfortably for 2 minutes without having to turn it off to protect the coil in the ecig.
Reading through the comments about not getting smoke to come out, I want to point out that when you solder the positive wire to the vape chamber, you must take great care to NOT block the hole in the center with solder. Resist putting the wire or solder in the hole, that will totally block the airflow through the unit!
Great job!!! I'm going make one a little bit different. Will have dual outlet for dual exhaust on my Jeep Rubicon. Maybe even use twin heaters wired in parallel. And maybe power it with the charging cable on the battery. Maybe use a little tin Altoids box.
It was relaxing, entertaining, useful and very nice to watch you and explain.... everything seems possible ! :D I used exchangeable cigarettes for my Junkrat's smoking hair, so I can't wait to finally exchange this tiny thing for a longer lasting one :D
glad you liked it, going to do a follow up vid to a modification very soon because sometimes the rod of the coil can come loose so made a (easy) fix for that. good to know this tech will serve one of your fab wigs soon :D
Oh cool ! I'm eager to see what's coming next ! Haha, thank you ♡ It totally will, because the wigs are finished and just the smoke will be replaced in all three wigs. ♡ Thank you !
When I attach the two red wired together to go on the opposite side of the switch, the power is very low. If I remove the one red wire that is connected to the inside of the vape pen, and only have the fish pump wire hooked upto the switch its full blast. I have the red wire soldered into the center of the pen and the black wire on the inside of the pen.
it is pretty easy actually, just the margin for error is low ;) be sure to check out my "smoke machine fix" video to fix leaks in airflow, as just 1 tiny leak can mess up the flow of smoke
What is the best way to mount the entire thing into something to make it silent, made a smoke machine out of larger vape gun and a air pump would like to make it silent
Hey Wayne, why didn't you use the supplied battery? Recharging could have been done via the USB-Port built in the prop. So it would have been selfcontained without the need of changing batteries ...
Bone Buddrus because the vape battery would have been to weak to power both the coil and airpump at the same time also its more compact/space efficient this way
does it have to be a vape pen? cant i like make a contraption that is similar to the vaping mechanism? (with burning coils & wet cottons / cloth) to make the fog effect?
Awesome Vid. Ive been looking for a simple solution to make smoke come out of a ghostbusters ghost trap. Im gonna give this a shot... once I build the trap. Ha!
Thanks for the video- super helpful! Couple questions... 1) would 18 awg wire be ok or did you use a different size? 2) Also, instead of a button would it be possible to hook up a wireless receiver? 3) Lastly you mentioned an e-cig with larger coils produce more smoke..have you found any and/or tested them? THANK YOU!!!
1. Think I used just that, standard cable which is used for audio in cars n stuff. 2. Working on making it wireless, yes it is possible. 3. Recently purchased a xl vaper, works but not tested with proper fog juice, results soon.
Hey mate, so I followed this and modified it a bit for miniature dioramas. Only problem is the dog leaves a residue on the miniature. Any suggestions to avoid this? Cheers!
I have a question: why must we use it in short bursts? If the coil will burn out, then how come Ms.Kamui let it run continuously for about 3 minutes? It because of different design?
its because this video is super old, and this design is old aswell with a very cheap crappy vape pen ;) i helped kamui with hers as she was very far along with it but couldnt get it to work all the way, so i know her version in her video is better then this one, my for sale versions of smoke machines can blast away for 20 minutes straight. so the short answer? crap shitty cheap vape = crap shitty short burst ;)
Hello, I am trying to make this, but somehow only air pump works and e-cig doesnt produce smoke. I had a quick question, why do you need to add minus wire to the side of e-cig?
hey. i really want to make this but the vape pens you used aren't available anymore. do you know of another brand that has the "hole" you were talking about?
didnt know the supplier went out, found a probable replacement, a pack of 10 atomizers so without the battery we are discarding anyway for cheaper. i updated the link in the description.
thanks so much for this. a friend helped me make one connected to a lithium ion 3.7v battery and it also has a light. I can't seem to find this info .. any idea how long the power going to the heating coil is safe to run without causing it to burn out or have other issues? I'm thinking 10 seconds?
to play it safe it would be 30 secs to a minute max, you could always test this, i know some people even pushed out 2 minutes, however it is at the risk of burning your coil... coils are not expensive and easy to replace so you could even test it if you really wanted to know
Hey wayne! Is there a chance that somethin burn or explose if i put 2x9v battery? Because it will be just on my helmet. I don't want to be a real DEATH knight ;) Thanks in advance!
Hey! So far it has worked, but there is one problem >u< (Might be my choice of E-cigarette, I dunno) But! My problem is - Everything seems to work, But there is no smoke coming out. As if the e-cigarette isn't warm enough? Air flows through and everything works; just no smoke.
Thank you so you much for the tutorial. Everything worked fine, I just have one question. When I plug the battery in, it instantly starts heating up. Do you know of any way to counteract this?
Spencer Cook sounds like a shit battery, power shouldnt flow as it stops at the switch so nothing should happen at all. Its that or you are short circuiting it somewhere where your + and - might be touching each other...
THANK YOU MEN!! YOU SAVED ME! GOOD THING I FOUND YOUR VIDEO!! I REALLY LOVE HOW YOU MAKE THIS :D GONNA DO THIS FOR TODOROKI SHOUTO FROM BOKU NO HERO. :D
I can't seem to figure out how to make this work. I have it all set up like this, nothing is blocking the hole either. I checked for leaks and I found one but fixed it imidiatly, and I fill the juice up only a little bit to avoid over saturation. The thing seems to work because the 9 V battery heats up a bit, but the coil doesnt crackle and no smoke comes out when I turn on the air pump and atomizer with the button. I'm super confused.
there is a "smoke machine fix" video aswell, you can also check if its the vape or the airpump, take off the airpump from the rest, turn on the device and blow smoke into the vape there where the airpump normally would. no smoke means the wiring is bad and the coil doesnt heat up. if there is smoke, the air from your pump doesnt reach the vape (airflow blocked or escaping) other then that i dont know where it might go wrong for you.
yup, for example your phone charger also works on 220v but converts it and outputs it to 5v, so just find one for 9v and you should be good, be safe though!
I think I'm gonna need to ask your guidance...i can get everything connected and when the battery is connected, the motor runs too, but no vape smoke at all...i made sure to solder as you instructed, but no luck :(
you can sometimes hear the vape "crackle" what you can do to see if you have a air tight seal, is to when you run the system, blow air into the vape hose where the airmotor normally is connected. if there is smoke, then the motor is faulty or not airtight connection... if no smoke, the vape doesnt heat up proper. find out problems by process of elimination ;)
Okay so I did everything you did and even used the same air pump and vape pen you recommended. I've got power going to the air pump but no smoke is coming out. I am unsure if the pump isn't blowing enough air (actually it isn't blowing a lot of air anyway. I shortened my tube from about 16 inches to around 2 inches amd I still don't feel air coming through the tube) or if my vape pen isn't working. Do you have any suggestions?
watch my smoke machine fix video, and test it apart from another, disconnect pump from vapepen and see if air is coming out and test if coil is hot by turning that on but blowing air in it with your mouth, so you know which one it is that isnt fuctioning
good video, but my problem lies somewhere in the unknown. i soldered up all my parts nearly shot for shot of your video here but my atomizer refused to make any smoke
Great Video!! Thank you for posting it. Am I mistaken, that the pens you posted are rated between 3V and 4V? Don`t you burn the coil when you apply 9V to it?
AndreasGienger coils can actually hold up to a 12volt pack. Also the airpump takes it's fair share so its all good. Tested this numerous times and measured with a multimeter
I tried it but it didn't work. I just connected a 9v battery directly to the e-cigarette and blew air into the atomizer as I didn't have a air pump. Why it didn't work. The e-juce used was glycerine and water.
because you are not following the tutorial? ;) a atomizers battery is rated at 4.5 volts, connecting the double amount of that with your 9volt might have blown it up already... try using a 2x AA battery pack, its 3volts but still better then a 9v blowout, also use distilled water, normal tap water will leave crap on your atomizer.
Wayne's Workshop I used mineral water. I also tried with 2xAA batteries. I seen your second tutorial of putting superglue in between +ve and - ve terminals and tried again.
yeah but you did it first with 9v, so you could have burned out the coil already, if that did happen, the AA seetup wouldnt matter as you already broke it (possibly)
Wayne's Workshop got it right. With 3v. I get smoked by blowing from back or pull out from the front. Thanks. It works. Now I have to improvise it with necessary tools. It seems the ratio of water and glycerine was not right for density of smoke.
Wayne, I used Glycerol BP and mineral water. What is the ratio to use for getting denser smoke. I get very light smoke. Can I use it directly without diluting ?
Thanx buddy but i can get my pen to smoke with a 9 v battery it needs an amp to smoke and a 9 v is only a half amp, its the same pen but i think i may need to add 9s in series but it may be to much volts, you could make money on this idea
maybe look into the big vape coils, i know there are vapers out there that want more smoke generated because generally they are more addicted to the inhaling part of smoking instead of the nicotine... do not know for sure but i know they can hold on for much longer...
Hello Friend. I did everything you said, soldered everything right, but the vape pen is not powered. I tested it without the air pump, and yet it does not turn on. What can I be doing wrong? :( It connects normally if I use the battery of the vape pen.
Rafael Pereira battery of vapepen forces the pin of the vapecoil to go down, ive found out that this can come out when you push the hose onto the vaper, you can fix it with a drop of superglue on the side of the pin (not centre because airflow)
Wayne's Workshop. i have the same problem, but the whole unit won't turn on when connected, the air punp works alone, but the vape pen seems to take too much power. what i mean is i Turn on the device and the air pump works, but if i conect the positive wire to the pen coil (like you show) the pump shuts off, please help asap! also I've done your coil trick and got no results.
you can hook it up to a lithium-ion battery (like the ones in your phone) just be carefull that you buy one with overcharge protector as they can blow up if you overcharge them. if you are looking for a simpler safer route just hook up 2 9v batteries in parallel. more info about difference in series and parallel here: www.zbattery.com/Connecting-Batteries-in-Series-or-Parallel
Hey Wayne. Great video. So i tried to do this method. I followed everything to the tee but I could get the smoke to come out. I soldered both positive and negative. I had to sand a bit on both metal pieces for the solder to stay on. Once i got it i hooked up everything put nothing happened. The air pump was the only thing that worked. But after a while i noticed that the 9 volt battery got extremely warm so i stopped ASAP. Did not want to cause an explosion of the battery. Do you have anything that cold help. I was hoping to put this into my Predator suit this weekend for a contest. Please let me know bud. Appreciate it.
ok lets make it happen then for this weekend ;) 1. check out my "smoke machine fix" video if ya hadnt already. 2. run the setup like you normally would but disconnect the tube that leads from the airpump to the vape pen. (disconnect from the airpump side) run the setup but blow air through the tube into the vape pen with your mouth. if you do get smoke, that means you have an airflow leak somewhere. if still nothing happens, it means your coil doesnt heat up and you might have a bad connection. 3. get back at me if it still fails and we see whats what (the 9v can get warm becuase it depletes rapidly, or theres a short circuit somewhere, if ya get smoke eventually we can talk about a different battery type but 9v is the easiest accesable, hence its in this video. bonus tip: use glycerine as your fluid (also known as VG) it provides the thickest clouds
Ok cool going to try that out today when i get home. So if the 9v gets that warm that means the connection is bad.Yeah i heard those E-cigarette explode. I got scared. I'm going to try it with the battery it comes with first to see if it work period . If it does then at least i know it works. then we can go to phase 2 and connect the positive and negative wires to the unit. So i bought fog fluid already from Party City. That should do the trick also the smoke shop sold me scent fluid too., I will try this today and get back to you. I need that smoke to come out of my gun =)
a powerbank can work also and if you wanna push it up, a 12volt pack composed of 8x aa will work real good and wont run out that quick. atleast your plasma cannon will smell nice :P
Yeah i have that for sure. I will make this happen today. Need it for Saturday got a Halloween Contest to enter. $5000 first place. Gots to make this happen. Thanks brother. I will let you know what happens today for sure...
I want to make this but the items take SO long to ship off ali express is there a way i ccan ask u about pieces i found on amazon i want to make sure they are right
Wayne's Workshop how about this push button I want to make sure it will work too www.amazon.com/dp/B07DMD3BCM/?coliid=I1YX46YFIALBLX&colid=3OMMHQN04WTXD&psc=0&ref_=lv_ov_lig_dp_it
i have one last question im trying to find fog juice on amazon i see all the giant tubs idk what your brand is in the video to look up or how many ounces so i can find that size/?
Wayne, this is an awesome tutorial! I'm working on something similar, basically faking a christmas fireplace. I'm currently using ultrasonic water mister and a fan, but this looks good too. Do you know how long that fog juice lasts for?
have you looked at my smoke machine fix video? it usually is a case of a leak in the airflow... detach the airpump, trigger the system but blow air yourself in the tube with your mouth, if you get smoke there is a leak somewhere in the airpump-to-vape part if no smoke, you might have soldered it wrong and the vape doesnt heat up, hope it helps
Wayne's Workshop I just watched your fix video but my problems seems to be that the solder won’t stick. Whenever I add solder it slips off. At first it stuck on but now it just slips off i don’t know why. Also I’m not sure if what your telling me to do is super glue it first to hold the position then add the solder. If that is what I’m supposed to do to fix this then reassurance from you would be much appreciated
OHmyJESUSROFL non sticking solder is either the surface is not hot enough or scuff up the surface a bit with sandpaper or needlefile so it has something to grab onto
Definitly gonna try and use this in my next cosplay, thanks! Still got a question though. Can I connect 4 smokers to one button and battery? I wanna add two smokers in my shoulder armor and two in my hip armor, but I just want one button to controle them (due to the fact that I can only turn them on for a couple of seconds.) I'm totally new to all of this, so I thought just gonna ask :)
Gallifreya Cosplay nope. 4 circuits on 1 battery won't work like this, you can however make 4 of these smokers with each their own battery, but instead of the switch in the video you buy a four pole double throw switch. This is a special switch to hook up several circuits to 1 switch lever.
Thanks! Gonna look into those then. And nothing changes in the way I add them all together (apart from that I need to add all 4 of the smokers to the toggle switch)? Do you know where I can find there switches? I only seem to be able to find toggle switches. Or do they only have those? Sorry for asking, totall noob when it comes to electronics >
Great Design, I modified it a bit by putting a 10 watt, 1ohm resistor in front of the positive lead to the ecig and then hooking up 2 9v batteries in parallel. It does a great job of keeping the ecig from getting too hot and supplying enough power without straining a single battery. I can run it comfortably for 2 minutes without having to turn it off to protect the coil in the ecig.
Cameron Fitzgerald sounds good
I'd probably replace the coil for better wire or somethin
This is the only reason I’d ever buy a vape pen! I love this and have always wanted fog/smoke in my Own creations! Thank you! Your are inspiring me
I’ve seen a few versions of this design, but adding the on / off button makes it the best one I’ve seen so far.
thanks :D its an old video already but still helps people
Yeah. Never thought of a button before. Thought it would be more advanced...which now realizing when saying it out loud just sounds stupid. Lol
Thank you for posting. I put together one of these smoke generators last night and, for the costs involved, I was happy with the results.
glad it worked out for you :)
Reading through the comments about not getting smoke to come out, I want to point out that when you solder the positive wire to the vape chamber, you must take great care to NOT block the hole in the center with solder. Resist putting the wire or solder in the hole, that will totally block the airflow through the unit!
Thanks for making this video. I want to add smoke effects to my Ghostbusters Proton Pack and this will work perfectly.
most definitely, a french group of ghostbuster cosplayers used this video to do exactly that :)
I am going to do this for my Mei gun and I am so excited. This was so incredibly easy to understand. Thank you so much!!!
Calavera good luck with it. Be sure to check my "smoke machine fix" video where I point to some improvements to the system
Thank youuuuuu for making this! It's very detailed and informative as well as quick and to the point!
Great job!!! I'm going make one a little bit different. Will have dual outlet for dual exhaust on my Jeep Rubicon. Maybe even use twin heaters wired in parallel. And maybe power it with the charging cable on the battery.
Maybe use a little tin Altoids box.
your vids just the thing I want to be watching,
well made, keep em commin...
I look forward to your next one
thanks man, working on one the coming week :)
Awesome! I'm going to be trying this on my Warcraft shield. Thanks for sharing with the cosplay community!
I'm making basically the same thing. But much more powerful (hopefully). Thanks for great example!
Fantastic tutorial, bro!! Much appreciated..this will go right into the suits in my hall of armor :D
It was relaxing, entertaining, useful and very nice to watch you and explain.... everything seems possible ! :D
I used exchangeable cigarettes for my Junkrat's smoking hair, so I can't wait to finally exchange this tiny thing for a longer lasting one :D
glad you liked it, going to do a follow up vid to a modification very soon because sometimes the rod of the coil can come loose so made a (easy) fix for that.
good to know this tech will serve one of your fab wigs soon :D
Oh cool ! I'm eager to see what's coming next !
Haha, thank you ♡ It totally will, because the wigs are finished and just the smoke will be replaced in all three wigs. ♡
Thank you !
When I attach the two red wired together to go on the opposite side of the switch, the power is very low. If I remove the one red wire that is connected to the inside of the vape pen, and only have the fish pump wire hooked upto the switch its full blast. I have the red wire soldered into the center of the pen and the black wire on the inside of the pen.
woah! you made it look so simple, definitely gonna try it out with my next cosplay. thank you! C:
it is pretty easy actually, just the margin for error is low ;) be sure to check out my "smoke machine fix" video to fix leaks in airflow, as just 1 tiny leak can mess up the flow of smoke
Great video can it be put on a timer?
Great tutorial! I will use this on my RC cars for burnout smoke.
great idea man, didnt even think of the rc possibilities :D
Do you need a specific ohm resistance on the coil or will any cheao vape do
I don’t see the links to all the materials in your video you said you did but good video and very descriptive
What is the best way to mount the entire thing into something to make it silent, made a smoke machine out of larger vape gun and a air pump would like to make it silent
Hey Wayne, why didn't you use the supplied battery? Recharging could have been done via the USB-Port built in the prop. So it would have been selfcontained without the need of changing batteries ...
Bone Buddrus because the vape battery would have been to weak to power both the coil and airpump at the same time
also its more compact/space efficient this way
Awesome. Very easy to follow. Exactly what I needed
amazing,thnx..but where i can get small airpump?
does it have to be a vape pen? cant i like make a contraption that is similar to the vaping mechanism? (with burning coils & wet cottons / cloth) to make the fog effect?
I'm excited to incorporate this into a wig of mine. I'll probably have to run multiple tube to help get it to come from all the places I need it too.
CBT-Cosplay parts are on it's way for an XL version 😁 need to do some testing first
Wayne's Workshop that's fine.
Awesome Vid. Ive been looking for a simple solution to make smoke come out of a ghostbusters ghost trap. Im gonna give this a shot... once I build the trap. Ha!
Thanks for the video- super helpful! Couple questions... 1) would 18 awg wire be ok or did you use a different size? 2) Also, instead of a button would it be possible to hook up a wireless receiver? 3) Lastly you mentioned an e-cig with larger coils produce more smoke..have you found any and/or tested them? THANK YOU!!!
1. Think I used just that, standard cable which is used for audio in cars n stuff.
2. Working on making it wireless, yes it is possible.
3. Recently purchased a xl vaper, works but not tested with proper fog juice, results soon.
That was actually really helpful. That’s for this idea man.
How
did you lock the core + because it has to be pressed to work because mine does not work
Hey mate, so I followed this and modified it a bit for miniature dioramas. Only problem is the dog leaves a residue on the miniature. Any suggestions to avoid this?
Cheers!
I have a question: why must we use it in short bursts? If the coil will burn out, then how come Ms.Kamui let it run continuously for about 3 minutes? It because of different design?
its because this video is super old, and this design is old aswell with a very cheap crappy vape pen ;) i helped kamui with hers as she was very far along with it but couldnt get it to work all the way, so i know her version in her video is better then this one, my for sale versions of smoke machines can blast away for 20 minutes straight. so the short answer? crap shitty cheap vape = crap shitty short burst ;)
So what happens with a weaker battery?
Does it reduce the output?
Hello, I am trying to make this, but somehow only air pump works and e-cig doesnt produce smoke. I had a quick question, why do you need to add minus wire to the side of e-cig?
Did you ever solve this issue?
hey. i really want to make this but the vape pens you used aren't available anymore. do you know of another brand that has the "hole" you were talking about?
didnt know the supplier went out, found a probable replacement, a pack of 10 atomizers so without the battery we are discarding anyway for cheaper. i updated the link in the description.
Didn’t see links to any of the items used in this! Can you share?
Thanks Wayne! I'm definitely going to try this.
thanks so much for this. a friend helped me make one connected to a lithium ion 3.7v battery and it also has a light. I can't seem to find this info .. any idea how long the power going to the heating coil is safe to run without causing it to burn out or have other issues? I'm thinking 10 seconds?
to play it safe it would be 30 secs to a minute max, you could always test this, i know some people even pushed out 2 minutes, however it is at the risk of burning your coil... coils are not expensive and easy to replace so you could even test it if you really wanted to know
Hey wayne! Is there a chance that somethin burn or explose if i put 2x9v battery? Because it will be just on my helmet. I don't want to be a real DEATH knight ;) Thanks in advance!
I want try this but add phosphorus powder to make it glow like magic smoke. Would be great for a Harry Potter wand 🥺
Hey! So far it has worked, but there is one problem >u< (Might be my choice of E-cigarette, I dunno)
But! My problem is - Everything seems to work, But there is no smoke coming out. As if the e-cigarette isn't warm enough?
Air flows through and everything works; just no smoke.
Thank you so you much for the tutorial. Everything worked fine, I just have one question. When I plug the battery in, it instantly starts heating up. Do you know of any way to counteract this?
Spencer Cook by "it" you mean the battery or the vapepen itself?
Oops, sorry. The battery starts heating up
Spencer Cook sounds like a shit battery, power shouldnt flow as it stops at the switch so nothing should happen at all.
Its that or you are short circuiting it somewhere where your + and - might be touching each other...
THANK YOU MEN!! YOU SAVED ME! GOOD THING I FOUND YOUR VIDEO!! I REALLY LOVE HOW YOU MAKE THIS :D GONNA DO THIS FOR TODOROKI SHOUTO FROM BOKU NO HERO. :D
Hahah! Mine is for a Katsuki Bakugo cosplay!
I can see my liquid bubble but I don't get any smoke. I tried with both the vape bits I got and it's the same each time :(
Great vid. Very useful and well explained. Thank you !!!
Thanks dude !! Just what i needed for a custom RC smoker !
I can't seem to figure out how to make this work. I have it all set up like this, nothing is blocking the hole either. I checked for leaks and I found one but fixed it imidiatly, and I fill the juice up only a little bit to avoid over saturation. The thing seems to work because the 9 V battery heats up a bit, but the coil doesnt crackle and no smoke comes out when I turn on the air pump and atomizer with the button. I'm super confused.
there is a "smoke machine fix" video aswell, you can also check if its the vape or the airpump, take off the airpump from the rest, turn on the device and blow smoke into the vape there where the airpump normally would.
no smoke means the wiring is bad and the coil doesnt heat up.
if there is smoke, the air from your pump doesnt reach the vape (airflow blocked or escaping)
other then that i dont know where it might go wrong for you.
Awesome video! How is the battery life with just the 9 volt and would you recommend using a lithium ion battery instead?
About how much use can you get out of one pen fill?
Dude! Amazing! Could I wire that to a 220v power outlet? I'd need some acdc converter to 9v right?
yup, for example your phone charger also works on 220v but converts it and outputs it to 5v, so just find one for 9v and you should be good, be safe though!
Hi! Please tell me how noisy is this pump?
Can I have a link to the motor pump and vape pen you used
I think I'm gonna need to ask your guidance...i can get everything connected and when the battery is connected, the motor runs too, but no vape smoke at all...i made sure to solder as you instructed, but no luck :(
you can sometimes hear the vape "crackle" what you can do to see if you have a air tight seal, is to when you run the system, blow air into the vape hose where the airmotor normally is connected.
if there is smoke, then the motor is faulty or not airtight connection... if no smoke, the vape doesnt heat up proper.
find out problems by process of elimination ;)
Okay so I did everything you did and even used the same air pump and vape pen you recommended. I've got power going to the air pump but no smoke is coming out. I am unsure if the pump isn't blowing enough air (actually it isn't blowing a lot of air anyway. I shortened my tube from about 16 inches to around 2 inches amd I still don't feel air coming through the tube) or if my vape pen isn't working. Do you have any suggestions?
watch my smoke machine fix video, and test it apart from another, disconnect pump from vapepen and see if air is coming out and test if coil is hot by turning that on but blowing air in it with your mouth, so you know which one it is that isnt fuctioning
good video, but my problem lies somewhere in the unknown. i soldered up all my parts nearly shot for shot of your video here but my atomizer refused to make any smoke
Did you fix it? Mines the same.
Great Video!! Thank you for posting it. Am I mistaken, that the pens you posted are rated between 3V and 4V? Don`t you burn the coil when you apply 9V to it?
AndreasGienger coils can actually hold up to a 12volt pack. Also the airpump takes it's fair share so its all good. Tested this numerous times and measured with a multimeter
Thank you bro for the tutorial, I want put both hand for my cosplay sub zero set up both arm and the mask
Hey , a quick question.... can I use smoke machine juice in this set up rather than vape juice !!!
David Robertson YES !!!
Wayne's Workshop thanks for the quick reply. .... 👍 keep up the great work ....... 👍 👍 👍
what do u use for juice
I tried it but it didn't work. I just connected a 9v battery directly to the e-cigarette and blew air into the atomizer as I didn't have a air pump.
Why it didn't work.
The e-juce used was glycerine and water.
because you are not following the tutorial? ;)
a atomizers battery is rated at 4.5 volts, connecting the double amount of that with your 9volt might have blown it up already...
try using a 2x AA battery pack, its 3volts but still better then a 9v blowout, also use distilled water, normal tap water will leave crap on your atomizer.
Wayne's Workshop I used mineral water. I also tried with 2xAA batteries. I seen your second tutorial of putting superglue in between +ve and - ve terminals and tried again.
yeah but you did it first with 9v, so you could have burned out the coil already, if that did happen, the AA seetup wouldnt matter as you already broke it (possibly)
Wayne's Workshop got it right. With 3v. I get smoked by blowing from back or pull out from the front.
Thanks. It works.
Now I have to improvise it with necessary tools. It seems the ratio of water and glycerine was not right for density of smoke.
Wayne, I used Glycerol BP and mineral water. What is the ratio to use for getting denser smoke. I get very light smoke. Can I use it directly without diluting ?
Could you hook up multiple pens to one button
you could, use a dpst switch
Thanx buddy but i can get my pen to smoke with a 9 v battery it needs an amp to smoke and a 9 v is only a half amp, its the same pen but i think i may need to add 9s in series but it may be to much volts, you could make money on this idea
How long can you run it on 7 volts? I need something that can stay on for up to an hour
maybe look into the big vape coils, i know there are vapers out there that want more smoke generated because generally they are more addicted to the inhaling part of smoking instead of the nicotine... do not know for sure but i know they can hold on for much longer...
Running them for that long is soooooo not good. Things could go very wrong. You dont want it to be running for an hour
Where did you get the fan unit?
What size silicone tubing? You did not specify.
Sam Hobson any will do that fits snug. I believe this is 5 or 6 inner diameter
would this work with a coil vape pen instead of a cotton string one?
Nuffy Kei don't see why not. Working on a xl smoker also. Still prototyping
vape cannot be used continuously so i decided to use Soldering pen to use its filament for Hours of running
Hello Friend.
I did everything you said, soldered everything right, but the vape pen is not powered.
I tested it without the air pump, and yet it does not turn on.
What can I be doing wrong? :(
It connects normally if I use the battery of the vape pen.
Rafael Pereira battery of vapepen forces the pin of the vapecoil to go down, ive found out that this can come out when you push the hose onto the vaper,
you can fix it with a drop of superglue on the side of the pin (not centre because airflow)
Rafael Pereira plan on making an fixer update video because ive had this happen more since the release of video
Thanks for the answer
Wayne's Workshop. i have the same problem, but the whole unit won't turn on when connected, the air punp works alone, but the vape pen seems to take too much power. what i mean is i Turn on the device and the air pump works, but if i conect the positive wire to the pen coil (like you show) the pump shuts off, please help asap! also I've done your coil trick and got no results.
Do you have a different vape or power source/battery?
How powerful is the pump? Im needing to send fog slong a 4 foot 9 sword
Wow great video thanks for sharing 💜 👍
What size silicon tubing is that?
Where is the Fix video?
Super, congrats !
2024 y funcionando gracias
Hey there I tried the setup just like you instructed. It smokes however, it drains the 9v really quick. Any hell would be appreciated
you can hook it up to a lithium-ion battery (like the ones in your phone) just be carefull that you buy one with overcharge protector as they can blow up if you overcharge them.
if you are looking for a simpler safer route just hook up 2 9v batteries in parallel.
more info about difference in series and parallel here:
www.zbattery.com/Connecting-Batteries-in-Series-or-Parallel
Wayne's Workshop thanks I'll give the lithium a shot
Hey, are you going to sell any more of these?
Hey Wayne. Great video. So i tried to do this method. I followed everything to the tee but I could get the smoke to come out. I soldered both positive and negative. I had to sand a bit on both metal pieces for the solder to stay on. Once i got it i hooked up everything put nothing happened. The air pump was the only thing that worked. But after a while i noticed that the 9 volt battery got extremely warm so i stopped ASAP. Did not want to cause an explosion of the battery. Do you have anything that cold help. I was hoping to put this into my Predator suit this weekend for a contest. Please let me know bud. Appreciate it.
ok lets make it happen then for this weekend ;)
1. check out my "smoke machine fix" video if ya hadnt already.
2. run the setup like you normally would but disconnect the tube that leads from the airpump to the vape pen. (disconnect from the airpump side) run the setup but blow air through the tube into the vape pen with your mouth.
if you do get smoke, that means you have an airflow leak somewhere. if still nothing happens, it means your coil doesnt heat up and you might have a bad connection.
3. get back at me if it still fails and we see whats what (the 9v can get warm becuase it depletes rapidly, or theres a short circuit somewhere, if ya get smoke eventually we can talk about a different battery type but 9v is the easiest accesable, hence its in this video.
bonus tip: use glycerine as your fluid (also known as VG) it provides the thickest clouds
Ok cool going to try that out today when i get home. So if the 9v gets that warm that means the connection is bad.Yeah i heard those E-cigarette explode. I got scared. I'm going to try it with the battery it comes with first to see if it work period . If it does then at least i know it works. then we can go to phase 2 and connect the positive and negative wires to the unit. So i bought fog fluid already from Party City. That should do the trick also the smoke shop sold me scent fluid too., I will try this today and get back to you. I need that smoke to come out of my gun =)
a powerbank can work also and if you wanna push it up, a 12volt pack composed of 8x aa will work real good and wont run out that quick.
atleast your plasma cannon will smell nice :P
Yeah i have that for sure. I will make this happen today. Need it for Saturday got a Halloween Contest to enter. $5000 first place. Gots to make this happen. Thanks brother. I will let you know what happens today for sure...
so if you win, you atleast owe me a beer :P
Did you stop making them for etsy?
No, this version wasn't an Etsy long, my improved version is though, a new lot will be back soon, just sold out currently
I want to make this but the items take SO long to ship off ali express is there a way i ccan ask u about pieces i found on amazon i want to make sure they are right
make sure its a 6v airpump and a vape pen with a hole in the bottom like in the video, otherwise you have to drill a hole and its not adviseable
Wayne's Workshop how about this push button I want to make sure it will work too www.amazon.com/dp/B07DMD3BCM/?coliid=I1YX46YFIALBLX&colid=3OMMHQN04WTXD&psc=0&ref_=lv_ov_lig_dp_it
it will
thank u for answering so quick
i have one last question im trying to find fog juice on amazon i see all the giant tubs idk what your brand is in the video to look up or how many ounces so i can find that size/?
IS A MOTOR 12 V?
Great tutorial, man! Thank you for vid.
Wayne, this is an awesome tutorial! I'm working on something similar, basically faking a christmas fireplace. I'm currently using ultrasonic water mister and a fan, but this looks good too. Do you know how long that fog juice lasts for?
Ben Eagan not really but should last a while
Can I do it with any vape ?
aslong as its not a sub-ohm vape, yeah
Just what I need! Thank you for this! :)
What size tubing
Im gonna use it for my it for my monster mask 😄
Really nice job...well done
Dude, thank you so much! So helpful!
OMG!! THANK YOU!! I LOVE YOU REALLY THANKKKKKKKKKKKKKKSSSSSSSSSSSSSSSSSS I WANT TO DO A SENKETSU WITH SMOKE AND YOU HELP ME VERY MUCH!
It will be so usefull oO Thanks Wayne!
I tried building this and it didnt work. I cant figure out what i did wrong
have you looked at my smoke machine fix video? it usually is a case of a leak in the airflow... detach the airpump, trigger the system but blow air yourself in the tube with your mouth, if you get smoke there is a leak somewhere in the airpump-to-vape part
if no smoke, you might have soldered it wrong and the vape doesnt heat up, hope it helps
Whenever I solder inside and outside the vape pen it tends to come off with the wire when I pull it slightly
OHmyJESUSROFL check out my smoke machine fix video
Wayne's Workshop I just watched your fix video but my problems seems to be that the solder won’t stick. Whenever I add solder it slips off. At first it stuck on but now it just slips off i don’t know why. Also I’m not sure if what your telling me to do is super glue it first to hold the position then add the solder. If that is what I’m supposed to do to fix this then reassurance from you would be much appreciated
OHmyJESUSROFL non sticking solder is either the surface is not hot enough or scuff up the surface a bit with sandpaper or needlefile so it has something to grab onto
Super glue is only to hold the pin in, not to stick solder or anything
Wayne's Workshop okay thank you for your help will try it out.
awesome vid bro!
Hello, do you sell it? :) i know its dyi guide but im usless in tech stuff.
Definitly gonna try and use this in my next cosplay, thanks! Still got a question though. Can I connect 4 smokers to one button and battery? I wanna add two smokers in my shoulder armor and two in my hip armor, but I just want one button to controle them (due to the fact that I can only turn them on for a couple of seconds.) I'm totally new to all of this, so I thought just gonna ask :)
Gallifreya Cosplay nope. 4 circuits on 1 battery won't work like this, you can however make 4 of these smokers with each their own battery, but instead of the switch in the video you buy a four pole double throw switch. This is a special switch to hook up several circuits to 1 switch lever.
Thanks! Gonna look into those then. And nothing changes in the way I add them all together (apart from that I need to add all 4 of the smokers to the toggle switch)? Do you know where I can find there switches? I only seem to be able to find toggle switches. Or do they only have those? Sorry for asking, totall noob when it comes to electronics >
I found a pack of 4 DC 6v air pumps on amazon for 15.99!!
cheaper to just buy the top, less waste and easy to get in vape stores and can get yourself ones with a bigger resevoir
I'm going to use this on a mtg card chest that activates when opened 😎
I've never seen transparent pump
Useful man thanks.