These things are beast! They actually share a lot with the vans... We had them as ambulances and were pleased with them. We had some with over 250k miles and 14k hours. They are tanks!
I have a similar plow/salt truck set up...I've found the 9.2' boss v-plow to be all you need for width even in deep heavy snow while in straight blade/full angled plowing...the plow edge is still outside the tire track. Also these trucks have incredible vision when plowing in the "over the hood" perspective and out the side and rear side mirror perspective...the 2 wd version i have is great in wet heavy snow...I have the most aggressive Goodyear snow tread on the rears...i will load up at least a ton of salt for rear ballast and traction if needed...and the most important aspect of this plow rig is maneuverability...I can turn around on a secondary side street with out backing up again and again, just a quick u-turn and heading 180 degrees the other way!
Great Rig, something needed in Minne-Snowda. 3/4-1 ton trucks are adequate 98% of winter, but we have those snow events that require something heftier, and easier to maintain (get parts). Was looking at commercial truck trader for used commercial grade, and considering M939 (6x6), M1079, M1090
You mentioned it a little bit but didn’t emphasize how awesome the turning radius is on these trucks. They can probably do a circle inside a three-quarter tons circle. I believe they are rated to have the best turning the radii in their class. I own six of these trucks, I believe they’re the best medium duty truck ever made. My only major complain about them is the ride comfort, they all seem to shake too much. I’m trying to find out how to get that rid of that, maybe upgraded leaf springs or air ride suspension. Haven’t figured it out just yet.
yes the best turning radius in the class and they ride excellent, I've gone to sand ballast wheel balancing and try to stay with 2wd kodiacs/top kicks...because these 4wd trucks have the classic GM front suspension wobbles as they wear out
Should have went with a western 9' 6" then put the wings on . that gives you 11'6" . I have the mvp3 9'6" on my 02 f-350 . works perfect . have 3an 1/2 inch leveling kit on it.
Sweet truck! I bet you'd love the new 10.5' XV2, those extension wings are horrible at windrowing. And you wouldn't have the expensive rubber edges on the bottom that wear pretty quick.
agreed, when i bought my rig new in 2006 the choice was a 9.2 or 10' power v with smart hitch and it worked out great..plowing width is outside the tire width, and could access the engine compartment by power tilt option on plow....if for some reason you lost all electric power then you had to manually remove plow from front of truck to roll back the hood...but thats the only small problem here...
Those of the later 06 were able to have the 6th gear activated.As I describe it I had to ask the 1,000 questions to be told that the 09 had it activated. Oh well .
Not much with the plow because the wings make it so wide. But the truck is a blast to drive on the road. Bouncy without weight in the bed but otherwise more fun than a pickup. It's not a good highway truck because the rear diff is so low. Tops out at about 74 mph
what fun is that? if you have the Boss smart hitch set up...just use the power plow frame tilt option and you can flop that hood up out of the way...botta boom botta bang! no problem!
well the cost for a similar set up in 2006-7 was about $65,000 now probably closer to $105,000...I would say you can safely have about 40,000 in a "used in great condition" set up like he has...so do the math...40,000 grand down on new rig(owing 65,000) or 40,000 grand down and paid for!
Hi, Thanks for the great review. One question - I'm contemplating purchasing one of these to tow a fifth wheel. How are they at highway speed? I'm concerned that with the deep ring and pinion ratio of the 4x4 it might not be a comfortable cruiser. Any insights would be greatly appreciated. Thanks.
I would not reccomend at highway speed. maybe if it were geared differently. but it pretty much tops out at 74. it's great for visibility and stability but for long trips on the highway I think you would be disappointed. they are not really rated for much more towing than a 2500 diesel of similar year due to its weight. The more modern diesel 3500 will outperform this truck for towing. maybe this is more stable but power to weight ratio and comfort on the highway....I would go with a 3500.
mine seems to be a governed engine but mine is an 8.1l and tops out at about 76 mph, 2wd version, Allison 5 speed auto..but in the summer towing a full weight 24' enclosed equipment trailer down the xway is no problem...
also i believe there is a limitation to highway speeds with 4x4 versions of this truck...55 mph possibly, i don't recall...but these trucks are very comfortable drivers...like a Cadillac
you dont have to either leave it at your customers site....or haul it to a site... drop the plow off and go do your salting routes all over town....just saying this thing is to be a mobile unit with variable uses
These things are beast! They actually share a lot with the vans... We had them as ambulances and were pleased with them. We had some with over 250k miles and 14k hours. They are tanks!
GMC Sonoma van front cabs...if you want those window vents you see on pickups...the option is a Sonoma Van option window vent
I have a similar plow/salt truck set up...I've found the 9.2' boss v-plow to be all you need for width even in deep heavy snow while in straight blade/full angled plowing...the plow edge is still outside the tire track. Also these trucks have incredible vision when plowing in the "over the hood" perspective and out the side and rear side mirror perspective...the 2 wd version i have is great in wet heavy snow...I have the most aggressive Goodyear snow tread on the rears...i will load up at least a ton of salt for rear ballast and traction if needed...and the most important aspect of this plow rig is maneuverability...I can turn around on a secondary side street with out backing up again and again, just a quick u-turn and heading 180 degrees the other way!
Great video, great piece of equipment.. Fantastic.. Would love to see more videos of it ploughing.... 👍👌👍👌👍
Absolutely awsome setup
Great Rig, something needed in Minne-Snowda. 3/4-1 ton trucks are adequate 98% of winter, but we have those snow events that require something heftier, and easier to maintain (get parts). Was looking at commercial truck trader for used commercial grade, and considering M939 (6x6), M1079, M1090
Great review n beautiful truck
I bought a motor home on this chassis. It’s awesome
Awesome rig! Love it
What do you get for gas mileage in your c4500 without the plow or sandbox?
You mentioned it a little bit but didn’t emphasize how awesome the turning radius is on these trucks. They can probably do a circle inside a three-quarter tons circle. I believe they are rated to have the best turning the radii in their class. I own six of these trucks, I believe they’re the best medium duty truck ever made. My only major complain about them is the ride comfort, they all seem to shake too much. I’m trying to find out how to get that rid of that, maybe upgraded leaf springs or air ride suspension. Haven’t figured it out just yet.
yes the best turning radius in the class and they ride excellent, I've gone to sand ballast wheel balancing and try to stay with 2wd kodiacs/top kicks...because these 4wd trucks have the classic GM front suspension wobbles as they wear out
also use the best drive shaft/mid shaft bearings and u joints only...
Should have went with a western 9' 6" then put the wings on . that gives you 11'6" . I have the mvp3 9'6" on my 02 f-350 . works perfect . have 3an 1/2 inch leveling kit on it.
Awesome!
would love to see that exact rig setup as a welding rig.
Oh I've seen it with a boom too
Snoway 29v with extensions would work also , plus has down pressure
Sweet truck! I bet you'd love the new 10.5' XV2, those extension wings are horrible at windrowing. And you wouldn't have the expensive rubber edges on the bottom that wear pretty quick.
agreed, when i bought my rig new in 2006 the choice was a 9.2 or 10' power v with smart hitch and it worked out great..plowing width is outside the tire width, and could access the engine compartment by power tilt option on plow....if for some reason you lost all electric power then you had to manually remove plow from front of truck to roll back the hood...but thats the only small problem here...
i must say though...the "formed curb protectors" cutting edges are expensive, so use those plowing pads/runners to conserve those edges!
I like it. And I dont like too many things.
Those of the later 06 were able to have the 6th gear activated.As I describe it I had to ask the 1,000 questions to be told that the 09 had it activated. Oh well .
What part of NY are you in?
I’m sure you over looked it rear Mud flaps keep it legal beautiful plow truck set up
yes...mud flaps needed or those poly wheel well covers
Nice rig
Thanks for posting!! Do you drive it over the road much?
Not much with the plow because the wings make it so wide. But the truck is a blast to drive on the road. Bouncy without weight in the bed but otherwise more fun than a pickup. It's not a good highway truck because the rear diff is so low. Tops out at about 74 mph
RPM Service you can delete the governor and it’ll go past 100 no problem
@@rpmservice5211 It would be a perfect truck for pulling equipment.
Did you know that they sell hoods with door so you don't have to open the hood to inspect your fluids
I am aware trucks have that but I haven't seen them for this model.
what fun is that? if you have the Boss smart hitch set up...just use the power plow frame tilt option and you can flop that hood up out of the way...botta boom botta bang! no problem!
That is bad to the bone do you have any led strobes on it ?
Jeez between the truck, the salter, the plow..this guy has a lot of money invested into this
well the cost for a similar set up in 2006-7 was about $65,000 now probably closer to $105,000...I would say you can safely have about 40,000 in a "used in great condition" set up like he has...so do the math...40,000 grand down on new rig(owing 65,000) or 40,000 grand down and paid for!
Hi, Thanks for the great review. One question - I'm contemplating purchasing one of these to tow a fifth wheel. How are they at highway speed? I'm concerned that with the deep ring and pinion ratio of the 4x4 it might not be a comfortable cruiser. Any insights would be greatly appreciated. Thanks.
I would not reccomend at highway speed. maybe if it were geared differently. but it pretty much tops out at 74. it's great for visibility and stability but for long trips on the highway I think you would be disappointed. they are not really rated for much more towing than a 2500 diesel of similar year due to its weight. The more modern diesel 3500 will outperform this truck for towing. maybe this is more stable but power to weight ratio and comfort on the highway....I would go with a 3500.
Seems like it would give you 5th wheel a good rattle
mine seems to be a governed engine but mine is an 8.1l and tops out at about 76 mph, 2wd version, Allison 5 speed auto..but in the summer towing a full weight 24' enclosed equipment trailer down the xway is no problem...
also i believe there is a limitation to highway speeds with 4x4 versions of this truck...55 mph possibly, i don't recall...but these trucks are very comfortable drivers...like a Cadillac
What did you pay for that plow
Boy, that needs a second step and big grab bars to get in that SEMI.
Put a set of triple chains on those rear wheels and you’ll really be able to push some snow!
Just saying...
Why this over a 4x4 tractor w/plow?
you dont have to either leave it at your customers site....or haul it to a site...
drop the plow off and go do your salting routes all over town....just saying this thing is to be a mobile unit with variable uses
176" wheelbase?
I believe so. Been a while since I measured but that sounds right
Honestly the normal pickup is not worth messing with if you live in a place that gets real snow
Fisher now makes a 10’6
I didn't know that. That's awesome.
Is this still available & if so where & how to contact?
sorry not for sale. I still use it.
@@rpmservice5211 TY for responding
To bad gm didn’t do solid axel on all there trucks
Ford f450 would do the samething
That’s GMC/Chevy for ya. They stopped making a great truck, maybe it was to great and lasted to long.
Sterling builds the same truck now.
I thought Sterling went out of business.
Lotta talk, no action. Does it even work??
Alot of plow talk
We had one but it had a 9.6 western with wings.