5:30 With the stickers, dont peel it straight away. Use a strip of painters tape to hold it in place on the window once you have it centered (step back and look), then peel off the backing paper from one corner. Allot easier, hope that tip helps out!
3.45 is an awesome ratio for au with a t5 just slap her in second and send plenty of torque and still good wheel speed doesnt run out of puff at high rpm like 3.9s or 4.11s in 2nd. Stock lsd's and even as I found the mace engineering torquelock lsd is not exactly the best for drifting. Will lock both wheels and can be drifted if working allright but can be unpredictable at times as will open up on some transitions and certian weight transfers. I know its not ideal for legal reasons being a road car but I highly recommend putting your mini spooled centre in with the 3.45 gears will be much nicer to drift on track and wont have to drive it as hard to maintain drift. Also the the gears themselves have the ratio stamped into them is 1 good way to check ratio and counting the turns of the pinion or tailshaft if in car is another way to check ratio. 1 full turn of wheel should be roughly 3 and half turns or just under of the pinion/ tailshaft means 3.45, just over 3 turns is 3.08 etc etc. Rather then just going off the sticker incase someone has swapped gears at some point . If has an open diff you will have to turn both wheels at same time to get a true ratio reading without checking actual stamp in gears just for future reference when buying unknown second hand diffs. Keep up the good work guys love seeing the progress.
@@kevinconnolly754 yeah that would work never driven with 4.11s only 3.45 and now 3.91 never was game enough to try third gear while still na loves 3rd gear now it's boosted
@@shaynefountain9254 3rd and 4th provides some pretty good entertainment in a flat tray au😂 i was going to go the turbo route but don't really need to with the mini spooled 4.11s
If thats an m78 (I assume it is), the LSD is going to be pretty unsatisfactory, don't waste money re shimming or notching. Options are basically a welder or a spool, I don't think you'll have an easy time fitting a tru trac into the LSD housing either.
It's actually really simple, you need the supercheap ac removal tools for lines and a screw driver, pliers, zipties and new submersible hose, probably a relay kit if you are going 360lph or bigger
@@VT2GUP After reviewing your reply to my reply i will now banish you from reviewing any content for any future purposes you will also have to paypal me $100 breaking our terms and conditions.
Love the AU! Keen for Nathan's EF XR6 for obvious reasons! 👌
You videos are soooo good bro I’ve been running through the old v6 mr2 swap 😊
I miss my mr2 🥲
@@RexH What happened to it?
@@Axalotl8 I stole it
@@RexH was such a sick build gonna have to make a v2 👀
That was a top series
5:30 With the stickers, dont peel it straight away. Use a strip of painters tape to hold it in place on the window once you have it centered (step back and look), then peel off the backing paper from one corner. Allot easier, hope that tip helps out!
Those rims are sick! And this thing will hammer with a 3.4 and an lsd
3.45 is an awesome ratio for au with a t5 just slap her in second and send plenty of torque and still good wheel speed doesnt run out of puff at high rpm like 3.9s or 4.11s in 2nd. Stock lsd's and even as I found the mace engineering torquelock lsd is not exactly the best for drifting. Will lock both wheels and can be drifted if working allright but can be unpredictable at times as will open up on some transitions and certian weight transfers. I know its not ideal for legal reasons being a road car but I highly recommend putting your mini spooled centre in with the 3.45 gears will be much nicer to drift on track and wont have to drive it as hard to maintain drift. Also the the gears themselves have the ratio stamped into them is 1 good way to check ratio and counting the turns of the pinion or tailshaft if in car is another way to check ratio. 1 full turn of wheel should be roughly 3 and half turns or just under of the pinion/ tailshaft means 3.45, just over 3 turns is 3.08 etc etc. Rather then just going off the sticker incase someone has swapped gears at some point . If has an open diff you will have to turn both wheels at same time to get a true ratio reading without checking actual stamp in gears just for future reference when buying unknown second hand diffs. Keep up the good work guys love seeing the progress.
i just send it in 3rd with 4.11s 😂 easily grabs 4th for a skid as well.
not fun on a hwy though
@@kevinconnolly754 yeah that would work never driven with 4.11s only 3.45 and now 3.91 never was game enough to try third gear while still na loves 3rd gear now it's boosted
@@shaynefountain9254 3rd and 4th provides some pretty good entertainment in a flat tray au😂 i was going to go the turbo route but don't really need to with the mini spooled 4.11s
If you were just after the 3.45 diff gears you can still buy them brand new from brands like dana spicer. Retail around $600 for the gears.
Building up fast since you got th AU falcon bro remember when you were like 3k subs congratulations and keep the content coming
If thats an m78 (I assume it is), the LSD is going to be pretty unsatisfactory, don't waste money re shimming or notching. Options are basically a welder or a spool, I don't think you'll have an easy time fitting a tru trac into the LSD housing either.
5:58 every doggo convo 🤣
Also side note ..jsut let rims self clear...fuck spending unnecessary money 💀
Mini spool it the lsd will last like a week in party mode, nothing worse then having an unpredictable diff haha.
Wheels look mega, 3:45 is gonna be so much better for ya!
Got one of those 3.45s factory in my el ghia
I got a 3’45 lsd diff from Melton 3 weeks ago for 200 bucks
Can you polish the headlights it would look so much better
Amazing job on your videos and your content is very good and pretty funny everybody 🚗🚗🚗🚗🚗10/10
Bro what drift event are you doing at the end of the month. I would love to get my AU out and have a slide with you.
Hi Rex love the vids can't wait too see u in winton soon 💙
Sooo close to 80k🎉
Ikr!!! ❤️✌️
Love the content and channel Rex
You got them TEHE 37s
Yo rex do you know how to change the fuel pump in a falcon, My ba Xr6 needs to be changed but I can't do it, I live in your area bro
It's actually really simple, you need the supercheap ac removal tools for lines and a screw driver, pliers, zipties and new submersible hose, probably a relay kit if you are going 360lph or bigger
@@tturi2 I got all the fuel lines off the pump besides the main one too the engine it was just stuck on there 🤔
@@orion_033 you need to get two flat head screw drivers to get it off, don't forget to drill the return hole bigger
@@tturi2 thanks bro
@@tturi2 yo is that the return on the pump yeah? How much bigger?!! Why ?
nice enjoy the uploads need to get some merch
Idol fr luv your vids too much haha
wow thats awesome
Elite Content
Woohoo!
LETSS GOOOO AHHHHH CRACK AHHH!!
needs more patrol vids
🔥🔥🔥
Wth cant believe we live in same suburb
Kaaaanggg
ef gang
Yes! Keen for the EF content! 👌
Please do a vid on the benki again
I love u rexi
Love you too monkey
Let’s hope u didn’t get scammed this time 🤣
Lets gooo
dude you could of bought one from at least 30 Sydney wreckers and shipped it down for less than $600
gooday
White wheels looked way better
whens next patrol vid my guy
This week!!
Anyone else click like before they even watched it aswell?
😍
No, i prefer to review the content before deciding to like the video to ensure maximum accuracy.
@@SHOCKcustoms Shutup
@@xclsv1350 after reviewing your reply, I have decided I dislike it with maximum accuracy. Like all Rex videos no matter what ❤️
@@VT2GUP After reviewing your reply to my reply i will now banish you from reviewing any content for any future purposes you will also have to paypal me $100 breaking our terms and conditions.
Bro just take the diff cover off and read the crown gear it’ll say it’s ratio
banners water proof ? so i can still wash my car
Yes they’re 100% weather proof!
600$ for a 345lsd isnt to bad as long as it it is in good nick.
Fucken oath
Haha I'm 8
man, that is one fucking ugly car