Overall I like your tutorial a lot, and I think it was pretty easy to follow. But at no point during the video did you say what each upgrade did to the overall functionality of the blaster. It would have been nice if you explained why each upgrade was being implemented. It seems like the only improvement to the working of the blaster is the upgraded battery. Why were the switches changed? Would the original switches fail under increased power?
18:50 ... as for showing your face during these kinds of videos. IMHO if you're explaining something that isn't easy to see inside the blaster or something arbitrary regarding a related feature or topic, it's often nice to see your face because it adds texture to the explanation or description. You can often understand what a person is thinking without them saying a thing. Just by looking at someone you can often tell exactly what's on their mind, especially if you know them or often see them in a similar role or function. That being the case, I would suggest that perhaps seeing someone's face while they explain or describe something, often makes it easier to understand.
For anybody looking for the brown wire, here is where it went: Pull the brown wire to the front of the blaster and add to the negative bundle. You can cut the wire a lot shorter after you pull it to the front.
Is this possible to do even if you don't swap for a lipo? I'm basically only switching my triggers but not sure if the brown wire would still be able to be added to that negative bundle in the front.
I had the same question. If we don't need to use that little brown wire, you might add it to the description on your website. It definitely goes to the pusher motor but I don't see anywhere that you end up using it.
I'm watching these for entertainment! I've been working my way backwards through the catalogue and I can only say that keeping up the work has paid of. I think this is nice relaxing video to watch but the newer ones are phenomenal!
When you say you have dead nemisis from screw holes being stripped there are fixes for this. I am a 3d printer hobbiest i work a LOT with ABS and these blasters shells are made from ABS plastic i beleive or has been said by others. What you can do is get some scraficial ABS plastic and add acetone to it, it will melt and turn to goop known as ABS juice by 3d printers. You can simply put a small drop of juice into any stripped hole and let it set, it will become rock hard like the original plastic once the acetone is evaporated. Then you can simple drill the hole to size and recut the thread with a screw use small 1/6 turns then back it out clear the cut plastic then repeat till the entire thread is cut.
@@outofdarts cnc kitchen did a review recently of this type of melt in place screw ports i think you are talking about (threaded inserts). If you have enough wall thickness to put them in they are a fantastic option. You can all ways bulk it up with juice or a 3d pen to put them in. Very nice idea, costs a small amount but way more professional and durable for reuse.
You secondard should cover a different aspect to your primary. Other wise there is no point to carrying it because better ammo management would have the same effect and just carrying more ammo. Example would be say a Caliburn and a stryfe or grass snake. So you have a single shot sniper and a high dps side arm for close range.
Not always. if you're trying to back up in case of a failure or depending on method of carry drawing a backup can be quicker than reloading... what you said is also a valid reason, but it is not the only reasoning for secondary choice.
@@EVIL_Adventures21 all of the reviewers have said they have never had a jam or malfunction with the perses. So if you ran out of battery which would be very silly. Which would mean your secondary should be a springer like a kronos.
@@Side85Winder i have had a jam with the perses. Even if i hadnt, my statement remains true. Like i said, your theory is valid, just not the only aspect to consider. Personally i like having a kronos on me as well, but i would totally rock a jupiter too. My endwar loadout this past year was a stryfe primary, dual thigh holstered hammershots and a rapidstrike on my backpack.
in the past i've had rival flywheels break off their motor shafts when running 3s on my Khaos, and even with a stock Nemesis. do you think you will ever make aftermarket flywheels for rival that will not do this?
I’m not a professional on this but I don’t think anyone makes after market rival wheels but I would use epoxy to glue them on but and the motor shafts a little so the glue has a surface to stick to
Can you do a fully modified pierces like a giveaway or something like that cause I want to try it out I only have a Hypnos and Artemis so I’m going to be hoping you answer my comment😀
Just finished, other than some of the wiring instruction missing from the video, this was very easy to follow and execute. Much easier to mod than the Nemesis was. Now I can't wait to pummel the guys in the office tomorrow!!! Thank you sir!! BTW, all your parts fit like a glove, excellent job!
Missing info: Solder the brown wire with the orange wire to the same terminal on the switch! If you don't do this, the belt can run without the flywheel running, and my belt starting running backwards! This should be in the wiring diagram, too.
I'm disabled and want to nerf with my son. I can't use my fingers (or hold things too well) and am in a wheelchair...so, was wondering if there's a way of modding this so it has one external trigger that i can have in my mouth and then i can rest this on my lap and hold it in place with my 2 arms and shoot my son until he screams :) ...or if anyone can think of any solution. Price isn't an issue as i realllllly want to be able to play nerf with my son.
First off I love your quality of film and your tutorials. I don't think you need faceshots. Blaster focused is perfect. Wiring diagram was great. I've been following for along time. Your 3d printing/design has come a long ways. You mentioned potentially streaming...tutorials or streams on creating your objects in 3d software would be my vote. Thanks for your dedication to film quality and rival line. Enjoi
I had a question about using the modded switches, my perses recently had a rev trigger malfunction where the blaster only revs occasionally when pressing the button. Looked to see inside and no parts were broken but just can't seem to get the flywheels to rev as regularly as they used to. Would adding these new switches fix the problem?
Please help, I have several perses that won't feed balls with the track, I just keep hearing what sounds like a clutch when I pull the trigger on all of them. I've looked everywhere for help
Is it actually necessary to clip the safety? I don't really care if it keeps the functionality, but i do want to keep the clicky lever. first time modder here, so any help would be greatly appreciated.
Man, I love the frame of that thing! I could definitely see trying to mod it like a Longstrike and make an awesome looking sniper rifle out of it for costuming purposes.
I'm pretty sure what isn't clear to me is 90% due to lack of practice. But that's why I'll be doing the mod with others around who have more practice. Thank you for the video, I know it will help me. Where is the best place to put the battery alarm? or did I just miss that because I was distracted?
Your hopper design for the Perses was the final deciding factor for me to buy 5 of these so everyone in the family will have a Perses for Christmas along with a spare, hahaha. I'll hopefully be ordering the hoppers for four of them in January and then the full mod kit for mine in February, lol.
This video in particular I believe is still 100% usable, you're clear enough with your words that you bridge the gap of what might be slightly out of focus; But just in case you forget to so literally point out what you're talking about, the only thing I can think of to improve this style of vid would be an occasional close-up still photo of what you're currently addressing. This way you don't have to worry about what may be too small or out of focus in frame on camera. Thank you very much for these vids though, it's certainly a lot less scary than trying to figure this kind of thing out myself.
Awsome my guide/tutorial I absolutely love all of your tutorials. And even though I did not have this guide to mod my first couple of perses, I absolutely love seeing how others mod their blasters because often is it that I find a better way to do something in a mod especially with your mod guides. Also as for video taping your face especially when giving descriptions toward how to do certain things I think it is a great idea. Thanks for the great video.
Great mod guide, as usual. As succinct as possible, considering the complexity of the wiring and the great mod options that are worth going through. I especially like the fact that you've retained the ability to use the stock battery to allow a direct comparison of performance between the lipo and stock battery. As usual, your switch mounts are totally worth getting as they make the mod so much easier. This is based on my experience using your switch mounts on the nemesis mod.
Great video, now i don't have a mod kit yet. But i do have a perses, thats doesn't work anymore..... The part thats "broken" is revving, i already opend the blaster and kind of singled out the issue. Its nothing to do with the hopper lock/safety's. Its probably has something to do with the rev switch pcb. It only worked when holding it up in a certain way and now it doesn't work at all anymore. It seems like there is a little bit of rust on the pcb. Does anyone know what is up with this and how to fix it? Is it the wires? Or is the solder not good anymore? Please let me know.
There are other retailers out there that may mod existing blasters for you. Out of Darts no longer sells completed modded blasters, as we make more room for original and licensed community designs.
Just to be sure, i bought this kit (not completely, bought the switch plates, switches (2), and the rev and firing trigger. Do i need that red wire that you added in (to link the rev and firing switch i think)? Does is work without that wire? Im new to modding electronic nerf blasters so please, someone help me out.
I wish you wouldn't have skipped forward at 42:41 because I am kinda having a hard time figuring out everything you did there. All of a sudden there's wires on the xt60 and everything on the left has already been taped and bundled. I think I understand but not totally %100.
Dat camera wobble. But thanks, Capt Xaiver's video on this didn't show exactly how to do this and yours makes me think I could pull this off myself with not a hell of a lot of investment in tools. Which is good because getting the Perses shipped to me in NZ is very expensive >_
There's currently a circuit board and component shortage worldwide, so stock is limited wherever you go. However, we do have MOSFETs of various shapes and sizes in stock on the site right now with the link below: outofdarts.com/search?q=mosfet
Hey, do you maybe think you could make a Perses jam door button replacement because I’ve seen a lot of things where the button plastic snaps, which happened to mine, and it’s kinda annoying because when you rev the Perses the door likes to slide open and I don’t think superglue will work, so that’s just an idea from me if you don’t want to that’s ok
Could u send me a extended mag hopper? I really want one! I’m getting a Perses blaster and a extended mag would be awsome! I cant really afford another $50 right now though!
So do your triggers fit if I don’t mod the blaster because my plan is to put your replacement triggers into the stock blaster without mods to play with my siblings and the stock triggers are sort of sharp so I want to replace them and does the extended hopper just snap on
When I opened my blaster I took out all of the stuff near the battery compartment and I have no idea how to put it back together can you please help me
![[REVIEW] Nerf Rival Perses Hopper Extension | Out of Darts](http://i.ytimg.com/vi/zJSJlki3kLc/mqdefault.jpg)
i think at the end of the tutorials, you should do a firing demo. Keep up the great videos!
And more before/after comparison
Like a before mod FPS & rate of fire vs after mod FPS & rate of fire change
Yessir
I dropped my perces on the tile in my house. And the flywheels now go faster. I broke the blaster in a good way
Weird maybe you broke some friction piece
It's like Handsome Squidward.
I dropped mine and now one if the flywheel’s won’t spin
Meet the Engineer
Overall I like your tutorial a lot, and I think it was pretty easy to follow. But at no point during the video did you say what each upgrade did to the overall functionality of the blaster. It would have been nice if you explained why each upgrade was being implemented. It seems like the only improvement to the working of the blaster is the upgraded battery. Why were the switches changed? Would the original switches fail under increased power?
Steve White the last question I also had. He should answer that one, but if you look you can find answers to the other ones in the video.
@@liondave1799 the original switches aren’t rated for lipos and they may burn out and will overall be less efficient than Omrons
I like how you throw away the ultra dart.
"soldering iron is on and I walk away"
Loved The IT Crowd reference.
IT crowd is amazing
@@synapse5585 YES
18:50 ... as for showing your face during these kinds of videos. IMHO if you're explaining something that isn't easy to see inside the blaster or something arbitrary regarding a related feature or topic, it's often nice to see your face because it adds texture to the explanation or description. You can often understand what a person is thinking without them saying a thing. Just by looking at someone you can often tell exactly what's on their mind, especially if you know them or often see them in a similar role or function. That being the case, I would suggest that perhaps seeing someone's face while they explain or describe something, often makes it easier to understand.
For anybody looking for the brown wire, here is where it went:
Pull the brown wire to the front of the blaster and add to the negative bundle. You can cut the wire a lot shorter after you pull it to the front.
Thank you so much. Totally freaked out when I noticed this halfway through soldering.
Is this possible to do even if you don't swap for a lipo? I'm basically only switching my triggers but not sure if the brown wire would still be able to be added to that negative bundle in the front.
Great video, highly appreciated, but where did the brown wire disappear to by the trigger switch 42:38??
I had the same question. If we don't need to use that little brown wire, you might add it to the description on your website. It definitely goes to the pusher motor but I don't see anywhere that you end up using it.
^^
I'm watching these for entertainment! I've been working my way backwards through the catalogue and I can only say that keeping up the work has paid of. I think this is nice relaxing video to watch but the newer ones are phenomenal!
Hi Luke!! I know the Hades is a bit of an old blaster, but It'd be cool to have a mod guide for that blaster too!
@@outofdarts I can't wait!
When you say you have dead nemisis from screw holes being stripped there are fixes for this. I am a 3d printer hobbiest i work a LOT with ABS and these blasters shells are made from ABS plastic i beleive or has been said by others. What you can do is get some scraficial ABS plastic and add acetone to it, it will melt and turn to goop known as ABS juice by 3d printers. You can simply put a small drop of juice into any stripped hole and let it set, it will become rock hard like the original plastic once the acetone is evaporated. Then you can simple drill the hole to size and recut the thread with a screw use small 1/6 turns then back it out clear the cut plastic then repeat till the entire thread is cut.
@@outofdarts cnc kitchen did a review recently of this type of melt in place screw ports i think you are talking about (threaded inserts). If you have enough wall thickness to put them in they are a fantastic option. You can all ways bulk it up with juice or a 3d pen to put them in.
Very nice idea, costs a small amount but way more professional and durable for reuse.
Side85Winder I just get bigger screws and thread it bigger
Loadout: FoamThrower
Primary: Perses
Backup: Jupiter
You secondard should cover a different aspect to your primary. Other wise there is no point to carrying it because better ammo management would have the same effect and just carrying more ammo.
Example would be say a Caliburn and a stryfe or grass snake. So you have a single shot sniper and a high dps side arm for close range.
Not always. if you're trying to back up in case of a failure or depending on method of carry drawing a backup can be quicker than reloading... what you said is also a valid reason, but it is not the only reasoning for secondary choice.
@@EVIL_Adventures21 all of the reviewers have said they have never had a jam or malfunction with the perses. So if you ran out of battery which would be very silly. Which would mean your secondary should be a springer like a kronos.
@@Side85Winder i have had a jam with the perses. Even if i hadnt, my statement remains true. Like i said, your theory is valid, just not the only aspect to consider. Personally i like having a kronos on me as well, but i would totally rock a jupiter too. My endwar loadout this past year was a stryfe primary, dual thigh holstered hammershots and a rapidstrike on my backpack.
Side85Winder also: how to be banned from nerf matches
in the past i've had rival flywheels break off their motor shafts when running 3s on my Khaos, and even with a stock Nemesis. do you think you will ever make aftermarket flywheels for rival that will not do this?
I’m not a professional on this but I don’t think anyone makes after market rival wheels but I would use epoxy to glue them on but and the motor shafts a little so the glue has a surface to stick to
There are flywheel to replace that are on thingaverse and you can use acetone to melt the broken flywheel back , but just a drop in the bored out hole
Can you do a fully modified pierces like a giveaway or something like that
cause I want to try it out I only have a Hypnos and Artemis so I’m going to be hoping you answer my comment😀
Could you upload the diagram to imgur for easy use?
Need a few more parts and I can finally start working on mine.
does anyone know how to put back together the battery mechanism?
Send us an email and we might be able to help! orders@outofdarts.com
i think you shoud re record the video using manual focus, you autofocus is horrible at every crucial time
Just finished, other than some of the wiring instruction missing from the video, this was very easy to follow and execute. Much easier to mod than the Nemesis was. Now I can't wait to pummel the guys in the office tomorrow!!! Thank you sir!!
BTW, all your parts fit like a glove, excellent job!
Glad it worked out for you, and good luck at the office game!
Firing demo
The Bob Ross of Nerf modding! Happy little solder joints!
Y e s
Can you make a PWM tutorial pleasee !
YES
Great vid, thanks Luke! How do you decide if/when to retain stock switches and use a mosfet?
Missing info: Solder the brown wire with the orange wire to the same terminal on the switch! If you don't do this, the belt can run without the flywheel running, and my belt starting running backwards! This should be in the wiring diagram, too.
I'm disabled and want to nerf with my son. I can't use my fingers (or hold things too well) and am in a wheelchair...so, was wondering if there's a way of modding this so it has one external trigger that i can have in my mouth and then i can rest this on my lap and hold it in place with my 2 arms and shoot my son until he screams :) ...or if anyone can think of any solution. Price isn't an issue as i realllllly want to be able to play nerf with my son.
First off I love your quality of film and your tutorials. I don't think you need faceshots. Blaster focused is perfect. Wiring diagram was great.
I've been following for along time. Your 3d printing/design has come a long ways. You mentioned potentially streaming...tutorials or streams on creating your objects in 3d software would be my vote.
Thanks for your dedication to film quality and rival line. Enjoi
I had a question about using the modded switches, my perses recently had a rev trigger malfunction where the blaster only revs occasionally when pressing the button. Looked to see inside and no parts were broken but just can't seem to get the flywheels to rev as regularly as they used to. Would adding these new switches fix the problem?
It does sound like the switch or some of the wiring might be the problem, so I would start with replacing the switches.
@@outofdarts thanks for the quick reply! I'll go through the rest of your guide to see if that's something I can handle myself
I can’t even open this up the trigger is broken
Is there a way that I can get you to do this for me??😅
It looks a little complicated
Please help, I have several perses that won't feed balls with the track, I just keep hearing what sounds like a clutch when I pull the trigger on all of them. I've looked everywhere for help
Is it actually necessary to clip the safety? I don't really care if it keeps the functionality, but i do want to keep the clicky lever. first time modder here, so any help would be greatly appreciated.
I have never modded a blaster before and after watching this I may try this out. Great video, easy to follow and inspiring. Thanks!
Man, I love the frame of that thing! I could definitely see trying to mod it like a Longstrike and make an awesome looking sniper rifle out of it for costuming purposes.
What did you do with the last wire that was by the trigger switch?
Thank you luke I just got my kit and it’s awesome
The video skips ahead at the 42:40 mark. What is the thick black wire coming out of the yellow XT90?! So confusing! Thanks!
My blaster’s flayed out in front of me and I’m lost too! I think it’s a black wire soldered to the battery connector port with heat shrink over it
This video is AWESOME! Thank you!
I am confused what all these terms are can someine help me out
No LiPo low voltage alarm?
You missed the part where you show the gun work 😒
Yeah this is too complicated for me. How much to have you do it for me?
www.etsy.com/listing/727315197/nerf-rival-perses-lipo-mod-red Here is a link to a shop that sells modified blasters.
I don't even own one of these lol. Good video though
How. Do you put on the hopper
Hi! We have an install guide specifically for the hopper with this video here! th-cam.com/video/7Hcoxm_KEgs/w-d-xo.html
I'm pretty sure what isn't clear to me is 90% due to lack of practice. But that's why I'll be doing the mod with others around who have more practice. Thank you for the video, I know it will help me.
Where is the best place to put the battery alarm? or did I just miss that because I was distracted?
The LiPo alarm just plugs directly into the battery and rests in the compartment alongside it.
@@outofdarts oh, I didn't realize that. Thank you!
Your hopper design for the Perses was the final deciding factor for me to buy 5 of these so everyone in the family will have a Perses for Christmas along with a spare, hahaha. I'll hopefully be ordering the hoppers for four of them in January and then the full mod kit for mine in February, lol.
Do a full auto kit for the jolt plz
This video in particular I believe is still 100% usable, you're clear enough with your words that you bridge the gap of what might be slightly out of focus; But just in case you forget to so literally point out what you're talking about, the only thing I can think of to improve this style of vid would be an occasional close-up still photo of what you're currently addressing. This way you don't have to worry about what may be too small or out of focus in frame on camera.
Thank you very much for these vids though, it's certainly a lot less scary than trying to figure this kind of thing out myself.
What is de Internal Diameter and barrel Length for 3d print rival adapter
I'm not sure what you mean. Shoot us an email to orders@outofdarts.com! We'll be better able to assist you there.
Just finished the mod man and it worked perfectly. Definitely my favorite mod so far!!! Thanks Luke for all you do!!!!
Hey could I put a 3s in there without doing any internal work besides replacing the battery tray?
@@billiejeanthejellybean2536, it might work for a little but the stock switch and wiring would burn out pretty quickly.
Thanks for the feedback
Thanks so much for this tutorials. My Perses is now super awesome!
But my Kronos is truly amazing!!!!
hey Luke i bought your book and have succesfully modded a nerf Kronos with it.
I really like the gun, and i love the Perses but don't have one.
When you realise the video is 55 minutes long
I know mods take a while but I thought that he would clip the video into parts
Awsome my guide/tutorial I absolutely love all of your tutorials. And even though I did not have this guide to mod my first couple of perses, I absolutely love seeing how others mod their blasters because often is it that I find a better way to do something in a mod especially with your mod guides. Also as for video taping your face especially when giving descriptions toward how to do certain things I think it is a great idea. Thanks for the great video.
Thank you so much for this! Once I pick up a Perses of my own, I’ll be back to this video! Definitely earned a like!
Hi Luke!
Have you ever thought about modifying infinus?
That might be a challenge
Great mod guide, as usual. As succinct as possible, considering the complexity of the wiring and the great mod options that are worth going through. I especially like the fact that you've retained the ability to use the stock battery to allow a direct comparison of performance between the lipo and stock battery. As usual, your switch mounts are totally worth getting as they make the mod so much easier. This is based on my experience using your switch mounts on the nemesis mod.
Personally, I think this mod guide is perfect! Just waiting for my order from your website and I'll be modding my own.
Also, Team Blue all the way :P
Hey Luke great mod guide but I don’t think you covered what kind of switch you put on.
Liked subscribed.
For the extra hopper space system you should add the attachment rails on top of the improved hopper
Nice video awesome
Great video, now i don't have a mod kit yet. But i do have a perses, thats doesn't work anymore.....
The part thats "broken" is revving, i already opend the blaster and kind of singled out the issue. Its nothing to do with the hopper lock/safety's. Its probably has something to do with the rev switch pcb. It only worked when holding it up in a certain way and now it doesn't work at all anymore.
It seems like there is a little bit of rust on the pcb.
Does anyone know what is up with this and how to fix it? Is it the wires? Or is the solder not good anymore? Please let me know.
Can you buy already modded guns
There are other retailers out there that may mod existing blasters for you. Out of Darts no longer sells completed modded blasters, as we make more room for original and licensed community designs.
@@outofdarts Thank you for the reply I like your company though are your kits easy to do.
Just to be sure, i bought this kit (not completely, bought the switch plates, switches (2), and the rev and firing trigger. Do i need that red wire that you added in (to link the rev and firing switch i think)? Does is work without that wire?
Im new to modding electronic nerf blasters so please, someone help me out.
I wish you wouldn't have skipped forward at 42:41 because I am kinda having a hard time figuring out everything you did there. All of a sudden there's wires on the xt60 and everything on the left has already been taped and bundled. I think I understand but not totally %100.
Dat camera wobble.
But thanks, Capt Xaiver's video on this didn't show exactly how to do this and yours makes me think I could pull this off myself with not a hell of a lot of investment in tools. Which is good because getting the Perses shipped to me in NZ is very expensive >_
is there another source for the mosfets you use in some of your mods and are unavailable on the website?
There's currently a circuit board and component shortage worldwide, so stock is limited wherever you go. However, we do have MOSFETs of various shapes and sizes in stock on the site right now with the link below:
outofdarts.com/search?q=mosfet
@@outofdarts I made an order for the nemesis mod kit and some springs. I'll let you know how it goes.
this is a great totorial well done luke
Hey, do you maybe think you could make a Perses jam door button replacement because I’ve seen a lot of things where the button plastic snaps, which happened to mine, and it’s kinda annoying because when you rev the Perses the door likes to slide open and I don’t think superglue will work, so that’s just an idea from me if you don’t want to that’s ok
Could u send me a extended mag hopper? I really want one! I’m getting a Perses blaster and a extended mag would be awsome! I cant really afford another $50 right now though!
Hi where can I purchase a knew belt for MY Rival MXIX-5000? Nerf Rival.
Great tutorial, I found the close up shots of how all the pieces fit back together helpful. Didnt take enough before photos when I opened mine up lol!
I would like to see a mod guide for the takedown and charger!
Recently, I heavily modified both my Chargers and my Takedown.
Super cool
Lead free solder? Why? Its so bad. 60/40 is the way to go. Just wash your hands instead of sucking on your fingers after you use it.
BROTHER.....PLEASE ADD SHAKING POWER RECOIL AND A LOUD SOUND EFFECT. YOU WILL BECOME MILLIONAIRE.
So do your triggers fit if I don’t mod the blaster because my plan is to put your replacement triggers into the stock blaster without mods to play with my siblings and the stock triggers are sort of sharp so I want to replace them and does the extended hopper just snap on
Hey bro, could you make a prometheus mod guide?
Need help putting my Perses back together, having trouble puzzling the gears back in
i wanna buy the files for the 3D printed trigger to have in my own colors will you sell this STL? rev and pusher trigger
Can the boards handle 4s???I just did the mod but I worried bout frying things on 4s
At 42:40 time in the video it cuts and there's a black wire that is sticking out of the xd60 connector what wire is that
Can anyone explain to me the wiring of the extra wire on the rev trigger? I have no idea where that additional 3rd wire goes
Hi luke could you maybe give us the download for the hopper... Please
can I still use it without a lipo?
I can't fork over the money as of now
just tested mine and under both stock battery and lipo the bottom plastic parts of the motors glow when spun up
When I opened my blaster I took out all of the stuff near the battery compartment and I have no idea how to put it back together can you please help me
Find a internal photo
Can't wait to do this mod. Great stuff Luke!
Cool
This guy don't need a buff its a perfect blaster pls sell me cheap one pls.😭
Nice thanx. Lost my factory batt haven't seen able to use it. 😢
YO YO
MIght want to put WHAT is the goal of the mod in the title, or say it first thing in the video
So you are going to just skip an entire step ? What did you do with the Brown wire ??
What's up with the brown wire you didn't soder by the trigger
Hey has anyone ever done a fly wheel swap. I've seen the wheels but cant fund a video
If youre reading this,
Make a nerf semi auto springer
Seems a little complicated. I’ll just keep mine stock…
can u make a guide on how to fix the rival perses or smth
My jam door release on the perses broke in half what do i do
Wtf y do I always wake up with an out of darts video on