2022 Road Glide ST Upgrade - HD Passenger Footboard Mounts Install
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- Installed the HD Gloss Black Passenger Footboard Support Kit. The Road Glide ST does not come with rear foot pegs or boards, and of course that means no mounts either, just the mounting holes, so you will need this kit if you wish to run rear passenger boards on your ride.
Passenger Footboard Support Kit (HD part # 50500042): www.harley-davidson.com/us/en...
@harleydavidson
Check it out and share your comments, feedback and questions.
All are welcome!
Just Kill’n Bugz Merch: www.bonfire.com/store/just-ki...
Just Kill’n Bugz Stickers and Such: www.redbubble.com/people/kill...
Share this video with friends: • 2022 Road Glide ST Upg...
Subscribe to my Channel (or share with friends) to get info and notifications on Current/Future Installs, Travel, and Reviews
* Just Kill'n Bugz: / @justkillnbugz
Items I Use Regularly:
APlusLift MT1500X 48” 1500LB Air - amzn.to/42q5o3Q
Strapinno Retractable Ratchet Straps 1 in x 6 ft - amzn.to/3JXMPNl
Gearwrench Adjustable Mobile Work Table 35-48” - amzn.to/40qUvNx
Video Audio: DJI Wireless Mic System - amzn.to/40fR3pq
Mobile Camera: GoPro Hero 11 Black - amzn.to/42thcCF
Helmet Camera: GoPro Hero 9 Black - amzn.to/3FFjhBl
Overhead Camera: GoPro Hero 8 Black - amzn.to/3LFWNEp
Rotating Camera Shots: Insta360 ONE X2 Action Camera - amzn.to/3lAue0o
Primary Video Camera: Sony ZV-E10 Mirrorless Camera - amzn.to/3JGb5C2
B-Roll Video Camera: Sony ZV-1 Content Creators Camera - amzn.to/3FJlV9i
Neewer 72 inch Tripod Kit - amzn.to/40ag6d9
NEEWER 2 Pack Bi Color 660 LED Video Light and Stand Kit - amzn.to/3JEopqB
60-Piece Master Torx Bit Set - amzn.to/3Z9Jv69
Lexicon Master Hex Bit Set - amzn.to/3nc3XWO
Tekton 3-Piece Swivel Head Racket Set - amzn.to/3JCIUnQ
Tekton 3/8 and 1/4 Inch Torque Wrench Set - amzn.to/3JG9V9E
US Veteran Hat with Embroidered DD-214 Alumni and National Service Ribbon: amzn.to/3zhpbFa
Want to Connect?
* Follow me on Instagram: / justkillnbugz
* Have something you want to send me?
* Robert
30141 Antelope Rd D676
Menifee CA 92584
* Just to put this disclaimer out there, I am not a certified Harley Davidson or Motorcycle Mechanic. I’m just a person who got tired of paying overpriced "what the book says" labor charges for simple things I could do on my own vehicles or projects. Just like most of you searching and watching these videos, I thoroughly enjoy working on projects in my own garage or shop.
* Additional note, all products/parts covered in these videos are not paid or sponsor provided, or unless otherwise indicated up front. I purchase all my own products/parts out of my own pocket just as my viewers would. The thoughts, opinions and comments are all my own based on this experience. Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional cost to you!
** Most of all, THANK YOU for your Support! **
My service manual states that torque for the bottom bolt
The top bolt is supposed to be far more tight, actually states 48-57nm of torque or roughly 40 lbs which i think is far too tight
About to install them myself and im worried that will just snap the bolt.. we will see😅
Thanks for the comments. I would go off of the values listed in the provided documentation of the kit you purchased. Those should be rated to the hardware provided. Don’t forget the loc-tite.
nice write up video
Thank! 😊
Have you had issues with the retention pins walking themselves out of the bracket once the floorboard was installed? I've lost two of the Thrashin' Supply floorboards now due to this issue, even after I started checking their position before and after every ride.
Thanks for the comments! Great question! I have these on both my RGST (now sold) and my Low Rider ST and have not had any issue with them backing out. In my videos for both, I discuss using loctite on the retention bolts, which has worked great for me so far. Luckily, I have not had either back out on any of my rides.
If you did not apply loctite to the retention pin bolts, give that a try and see if it helps minimize or even stop any vibration movement.
Ride Safe!
My ST didn’t come with two bolt holes open only one. How did you get the second hole open
Hey Donny, thanks for the question. On my RGST and the LRST, the rear peg mount and front board mount holes have black plastic plugs in them. In my videos I show them and how to back them out so you can expose the threads for the additions.
Hope that helps and ride safe.
My foot rest will not tighten and I have no idea why they won’t.
Not quite sure what you mean but be sure you have the correct hardware in the correct places.
@@justkillnbugz I was using the wrong bolts like an idiot. Fixed it though thank you.