@@zl1addons162 Understandable on the front pads being used as lift points. However, with the side skirts installed, I would believe the skirt hinders the use of the factory rear lift point, as unable to place a jack pad to the 'slotted' area. Some have stated that in raising the rear of the vehicle using the rear pad, the jack slips off. There is a video on TH-cam of a person trying to lift the rear with the 'rear pad' and the vehicle dropped; unto the bumper. I purchased the skirts but have not installed as yet.
@@SuperSynoptic Hey, no no no... you have two composite cones (black in color) just off the pinch welds that are factory lifting points. www.challengerforum.com/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20180412%2Fdf5349af734bc925f68c58d766b380af.jpg&hash=b7c7487ae62db9e703d59f52e34f834f
@@youarehere0 I have not installed as yet but placed a credit card to replicate the skirt. It looks very close, if not impossible to insert a jack pad. Then, one cannot place a jack saddle on the jack pad to raise the vehicle for there is 'no' room.
We have a widebody setup that is slightly different. zl1addons.com/collections/challenger-body-kits/products/challenger-18-20-widebody-body-kit?variant=14153750347839
Have had these on for a year now and they look great but just b aware that no shop will want to lift the car from the jack points with these on. Ive even shown this video to the service dept at dodge and they would not lift the car for a simple oil change. Went to 3 dodges and 2 side shops and they would not lift it.
Wow, looks like I'm in trouble. The new Challengers are wearing the skirts O.E.M. To my knowledge, my 13' Challenger has been on the lift for nearly ten years for oil changes and I do not believe the hydraulic lifts use the pinch welds to raise the vehicle. * I just called a Dodge dealer regarding this issue and service stated there are "no issues" in raising the vehicle.
@@SuperSynoptic they dont come with side skirts. So maybe your the one thats confused i guess. Even if u try and build a car thru dodge with the jailbreak option, side skirts isnt a option
@@DCGEMINI202 Well, I should have taken a picture of it. The Challenger was brand new and had side skirts. I asked about them as not having seen that facet before but not any could provide any information. In that I liked the look is what led me to purchase the ZL 1 Side Skirts. In addition, I opened the trunk and noticed there were "No" weep holes in the channel, unlike my 13' Challenger. I don't mean to get off the subject but that's a fact.
Install is awesome no drilling 👍 just ordered my set looking forward to install them on my 18 Challenger Sxt plus
Cool I will order them asap for my hellcat
Damn Nice!!!
Buying soon!
will these work with the Mopar rock guards?
Where do you put jack stands man? Lol
Can the trim have different color added
Where's the link for Chrysler?
Anything for a 2013 rt?
Do you make them for a Dodge Magnum?
Thanks for the vid.. It looks sick.. Do they come for the '16 300c?
I like.....Will this fit a factory Wide Body 2018-2019Hellcat/2018 Demon/ Wide Body 2019 Scat Pack?
Waiting on that answer
Doesn’t specify what size Allen head he used...my hardware was not installed onto the side skirt as mentioned in the video 🤷🏽♂️
The hardware is wrapped in separate bag to prevent scratching and damage in shipping. 1/8" allen
I'd like to see a video of the side skirt install for the Corvette C8. Thanks.
Good vid
How do you jack up the car using the pinch welds when the side skirts are installed?
The front pads are lift points, the rear side has factory lift points off the pinch weld.
@@zl1addons162
Understandable on the front pads being used as lift points. However, with the side skirts installed, I would believe the skirt hinders the use of the factory rear lift point, as unable to place a jack pad to the 'slotted' area. Some have stated that in raising the rear of the vehicle using the rear pad, the jack slips off. There is a video on TH-cam of a person trying to lift the rear with the 'rear pad' and the vehicle dropped; unto the bumper. I purchased the skirts but have not installed as yet.
@@SuperSynoptic Hey, no no no... you have two composite cones (black in color) just off the pinch welds that are factory lifting points.
www.challengerforum.com/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20180412%2Fdf5349af734bc925f68c58d766b380af.jpg&hash=b7c7487ae62db9e703d59f52e34f834f
What is those bracket name? I want to do this but the cheaper version from eBay and i need to know what bracket are these. Thanks
We custom make our brackets.
@@zl1addons162 am i able to just buy the bracket for the skirt?
@@cchaddmaruquin1005 You can, just email our support team and they can assist.
Wonder if they have anything that cool for a 2015 RT CHARGER
We offer a lot of products for the Charger - zl1addons.com/collections/charger-2011-2018
How much is this kit
I can't find these skirts... can we get a link?
Do these get in the way of your Challenger lift pads (front and rear) that are supposed to be installed on the pinch weld?
I just read on the site that these replace the lift pads? Is the surface area covered in the pinch weld large enough to be safe for repeated lifting?
@@youarehere0
I have not installed as yet but placed a credit card to replicate the skirt. It looks very close, if not impossible to insert a jack pad. Then, one cannot place a jack saddle on the jack pad to raise the vehicle for there is 'no' room.
Was on your web page..
I dont see the side skirts for a 2019 challenger ??
See here: zl1addons.com/collections/challenger-body-kits/products/challenger-15-19-body-kit-1?variant=15871345295423
Does this fit a 2020 wide body challenger hellcat redeye?
We have a widebody setup that is slightly different. zl1addons.com/collections/challenger-body-kits/products/challenger-18-20-widebody-body-kit?variant=14153750347839
Have had these on for a year now and they look great but just b aware that no shop will want to lift the car from the jack points with these on. Ive even shown this video to the service dept at dodge and they would not lift the car for a simple oil change. Went to 3 dodges and 2 side shops and they would not lift it.
Wow, looks like I'm in trouble. The new Challengers are wearing the skirts O.E.M. To my knowledge, my 13' Challenger has been on the lift for nearly ten years for oil changes and I do not believe the hydraulic lifts use the pinch welds to raise the vehicle. * I just called a Dodge dealer regarding this issue and service stated there are "no issues" in raising the vehicle.
@@SuperSynoptic im confused, they don’t come with O.E.M side skirts.
@@DCGEMINI202
I recently seen a "new" Challenger with side skirts on a wide body. (In the Showroom) Nothing to be confused about.
@@SuperSynoptic they dont come with side skirts. So maybe your the one thats confused i guess. Even if u try and build a car thru dodge with the jailbreak option, side skirts isnt a option
@@DCGEMINI202
Well, I should have taken a picture of it. The Challenger was brand new and had side skirts. I asked about them as not having seen that facet before but not any could provide any information. In that I liked the look is what led me to purchase the ZL 1 Side Skirts. In addition, I opened the trunk and noticed there were "No" weep holes in the channel, unlike my 13' Challenger. I don't mean to get off the subject but that's a fact.
Does this fit a 2019 dodge charger scat
We offer a specific Charger product, this one is for the Challenger.
Can u make some side splitters for 2016 Nissan Maxcima
Could you do a video for the camaro body kit
They are nice but they lose their color had them for a year and they look all gray