Good tutorial. I Got the two rear bolts out without dropping the mount. I used a #4 hex wrench instead . My bolts weren't rusty, so was able to get them off easily. Hand tightened them back on. No drips.
Good video. The fact that you did it with an Alan L wrench and on the ground, i give you credit. I work for Dodge, i use a cordless battery 3/8. and a lift of course. I have a 2013 Hemi Charger our cars take 5.2Q
Thank you. I'm not a mechanic.lol I was doing it just to save me and other people a few bucks. I love those cars, but they have a lot transmission issues.
Well, I guess I'm unlucky. Lol. I had 2 chargers, 1 sxt and an R/T, and one chrysler 200 all 3 had the same transmission problem. But they were bought used. So it could be how they were driven.
No. Just need to elevate the car so that you can get under to remove it. You either need to jack the car up or use the 2 ramps like I did. Make sure to put something behind the rear wheels before going under the car.
Yes. It is not that hard to do. Just make sure you get right oil and filter for your car specifically. When you drain your oil make sure to measure how much oil comes out of the transmission, so that you know much to add back into the transmission. If you don't feel feel comfortable doing it, it is always a good idea to let the dealership do it for you. Good luck!
Thank you for your question. Not too tight because you don't want to mess up the gasket. Just about 7 lb ft of torque. Over tightening could cause a leak. So take your time to avoid that. Good luck!
Hey there. This is the kind I used. But my car was a 5.7L Hemi engine. So as long as you have the similar vehicle that is the kind you need. (STP ATF+4 Automatic Transmission Fluid )
@@AubinAutoDiy thank you and I just changed my transmission fluid now my car is smoking, I may either put to much or I think the bolts are loose, idk but it’s driving funny now, it’s driving a lot worse how many quarts does it take ? I was told 8
@youngbucks6504 Hi. I am not sure why it is smoking. Where the smoke is coming from? If you measure the oil you drained out of transmission and added same exact amount, it should not cause you any issue. Unless you added more than that. If you rewatch the video you should see where I said to make sure to measure the amount of oil you took and add back the same amount.
@youngbucks6504 if you added 8qts back, that is way to much oil. You need to redrain it and add the total amount you drained from the pulling transmission pan.
@@AubinAutoDiy yea I went to autozone they told me 8 quarts but I don’t think I bolted down the pan all the way it’s leaking a little so I can kind of see where the smoke coming from, still think I overfilled it , that’s just my guess but thank you
I don’t mean to seem like a dbag or anything but the proper pronunciation is jack your car up. Off means your trying to give your car a stiffy or something, kind of hard. Nonetheless the video was helpful
Nice job man, birds in the background, no editing, just raw footage. Love it.
Good tutorial. I Got the two rear bolts out without dropping the mount. I used a #4 hex wrench instead . My bolts weren't rusty, so was able to get them off easily. Hand tightened them back on. No drips.
Thank you for taking the time to comment on the video. I'm glad that it helped you
Bro you are a life saver! I am about to change the transmission fluid and this helped alot with some info i needed. Thank you!
I'm Glad to hear that
Good video. The fact that you did it with an Alan L wrench and on the ground, i give you credit. I work for Dodge, i use a cordless battery 3/8. and a lift of course. I have a 2013 Hemi Charger our cars take 5.2Q
Thank you. I'm not a mechanic.lol I was doing it just to save me and other people a few bucks. I love those cars, but they have a lot transmission issues.
@@AubinAutoDiy These cars have the Nag1 transmission. Made by Mercedez. Its the best trans Dodge/Chrysler/Jeep put with the HEMIs
Well, I guess I'm unlucky. Lol. I had 2 chargers, 1 sxt and an R/T, and one chrysler 200 all 3 had the same transmission problem. But they were bought used. So it could be how they were driven.
Good tutorial video! Someone always has questions! 👍🏿. Don't mind some of these clowns 🤡.
Thanks for watching!
Quick question did you jack up the trans when taking the crossmember off ?
No. Just need to elevate the car so that you can get under to remove it. You either need to jack the car up or use the 2 ramps like I did. Make sure to put something behind the rear wheels before going under the car.
So this is all I need to do it myself as far as the oils and the filter ? Dealership is taking forever to call me back to do mine
Yes. It is not that hard to do. Just make sure you get right oil and filter for your car specifically. When you drain your oil make sure to measure how much oil comes out of the transmission, so that you know much to add back into the transmission. If you don't feel feel comfortable doing it, it is always a good idea to let the dealership do it for you. Good luck!
That would be a NAG1 transmission, chart C correct?
Yes, that is correct
What year is your charger brother
This one was a 2012.
Where did you get a dipstick? What part number?
From Amazon. You can type transmission dipstick for dodge charger on Amazon and you will find the right one.
5.7 L HEMI V8 Automatic Transmission Dipstick Permanent Locking Fit for 300C, Challenger, Charger, Magnum with and NAG1/W5A580 - Stays in Vehicle
how tight do the bolts go upon reassembly? I did this once on an old camaro and I remember getting a ton of leaks cus I overdid it :(
Thank you for your question. Not too tight because you don't want to mess up the gasket. Just about 7 lb ft of torque. Over tightening could cause a leak. So take your time to avoid that. Good luck!
@fastlanecharger23 thank you very much, excellent tutorial.
Hii bro, what kind of oil do you used
Hey there. This is the kind I used. But my car was a 5.7L Hemi engine. So as long as you have the similar vehicle that is the kind you need. (STP ATF+4 Automatic Transmission Fluid
)
Hope I was helpful to you. Please don't forget to subscribe and it will mean a lot. Thanks
What kind of bolts go on that transmission pan
The bolts are allen key bolts.
@@AubinAutoDiy thank you and I just changed my transmission fluid now my car is smoking, I may either put to much or I think the bolts are loose, idk but it’s driving funny now, it’s driving a lot worse how many quarts does it take ? I was told 8
@youngbucks6504 Hi. I am not sure why it is smoking. Where the smoke is coming from? If you measure the oil you drained out of transmission and added same exact amount, it should not cause you any issue. Unless you added more than that. If you rewatch the video you should see where I said to make sure to measure the amount of oil you took and add back the same amount.
@youngbucks6504 if you added 8qts back, that is way to much oil. You need to redrain it and add the total amount you drained from the pulling transmission pan.
@@AubinAutoDiy yea I went to autozone they told me 8 quarts but I don’t think I bolted down the pan all the way it’s leaking a little so I can kind of see where the smoke coming from, still think I overfilled it , that’s just my guess but thank you
Great video btw
Thanks!
@0:19
Dafuq did you just tell us to do bruhv?
Hi. I did not get your question. Can you be a little clearer please?
😂😂
You heard him. Jack your car off. Then get to work. Happy car, easy job.
🤣
How many put oil
You will have to measure the amount of oil that drain . Then replace it with the same amount of oil you just drained. Good luck!
I don’t mean to seem like a dbag or anything but the proper pronunciation is jack your car up. Off means your trying to give your car a stiffy or something, kind of hard. Nonetheless the video was helpful
Yes it is. I made a mistake and I didn't have the tool to fix it
Bro the 2015 are so different
Oh ok. Mine is 2012 on this video. I have not done this on a 2015 model. So you probably are right about that.
Jack your car off?
I’m sorry?
Sorry, it was a mistake I couldn't remove from the video. But what is important is the free help for those who needs it.
Best part of the video!