Vintage Aussie V-Twin Chopper - Howard 80cube Big Twin Project
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- Yes! You have read that correctly. Check out this Australian Big Twin from back in the 20's I'm going slap into a chopper!
In this video I dive into this Aussie V-Twin I have and show you the ins and outs of it. Going through a brief description of where I'm heading with the build and what it will consist of.
For more updates stay tuned on my Instagram
/ philsworks
Don't forget to check out my webstore too! I'm always adding new listings!
philsworks.myshopify.com/ - ยานยนต์และพาหนะ
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
![[TH] G2 vs PRX | EDG vs FUT - VALORANT Champions 2024 DAY 4](http://i.ytimg.com/vi/Bkr_qM7dIaM/mqdefault.jpg)
PLEASE document the motor build! I want to see everything but, I 'm extremely interested in see all the details of that engine. I am very exited to see the end product!
I will definitely be documenting the assembly of the engine mate! It is a seriously interesting piece of equipment!
@PhilsWorks Howard factory in Sydney? Shut down inthe50s I think nocastings or moulds left on premises if memory serves. Don't know if the last employee is still alive. Would perhaps have a wealth of knowledge if he is.
Document everything mate can’t wait
I remember seeing a photo of one in a ''Live to Ride'' magazine ,it was in a bike [road going] ,at a Rally
I still have all 3 and running well.
I've got a 70s Santee frame and was toying with the idea of putting a water-cooled Howard in it. I'll be watching this build with a lot of interest. Good luck with it mate
Yes many water-cooled Howards around but I can't bring myself to put a radiator on a chopper hahah
@@PhilsWorks I was thinking of trying to hide the radiator under the seat lol
Can’t wait to see this build
Hi Phil Gary here, I have 3 Howard motorcycles that you can see running on this page. I built them in the 1980's. These motors were manufactured from 1932 to 1939 and are 1264cc or 77 cu in. There were only 5000 made so you are very lucky to own one. They were never designed to run much more than 1000rpm. If you try pushing too much more, the conrods will snap just above the bearing and punch a hole through the cases. I know so I redesigned and had stronger rods made. Hope all goes well with your build and if you need any information on them, just ask. PS, The oil pump inlet is the lower right, the lower left with the one way valve, goes to the crankshaft and rear of the right barrel. The top left comes from the crank case while top right returns to the oil tank. They are a very slow pump so it will take a while till oils spits out, yes spits out. These engines don't have oil pressure, they just need to flood the mains so tolerances in the mains is critical.
Hi Gary! Thank you for reaching out! hard to find information on these things. I have a few questions, could you please shoot me an email! (email in my Contact)
Hi Gary, do you know what the valve timing is on these engines ?
Cool project. I can remember a early ozbike with a Howard chopper. Might of been the eighties. Looking forward to seeing this on the road.
Yea! As iv said before! Iv heard of these choppers around and see old photos but iv never seen one in person or ever heard one of these engine run
@@PhilsWorksThere were 2 at Bulli last year. One is built like a flat tanker.
Yep i saw the one in ozbike in the eighties, it was cool and owner said it went well .
I still have all 3 and are in mint condition.
@@PhilsWorks Hi look on this page, there are the first and third ones I build running after full restoration.
This is mad mate. Can’t wait to follow this along
Building engine soon!
Saw another guy in one of the Aussie stationary engine groups build one of these, his name is Ron Xuereb. Good luck with the build.
Yes it’s been done a handful of times! Mine will be 1 of a kind though
For sure! If you could track any of the employees down, you would probably be amazed by the stories they could tell. Documenting history like that is so important. Especially if you're getting the information directly from someone who was there!
Think I will be struggling to find employees from the 1920’s! Haha
I have one too great video can't wait to see more thanks
Thanks for watching!
This is so f ing rad man. Stoked for this one!!!!!!
Interesting for sure, Love the way you wing stuff, always interesting to watch and learn, look forward to more.
Glad you enjoyed it! There’s no other way except throw ya self in the deep in and work it out haha
Really cool project,,document as much as possible phil cos knowing how it works is as interesting as fuck also
Will do mate thank you!
Good to see this underway, nice one Phil!
Long way to go but making a start none the less
Can't wait to see it together and ready to ride.
You and me both!
A kick ass vintage cropper build🤘
Thank you!
In Iowa,USA we call that a Rototiller
Over here we call them "cultivators" too. Have you ever seen or heard of a Howard over there? I believe they were only ever exported to the UK
@@PhilsWorks Nope you were correct never heard of a Howard before? Cool looking motor though gonna be fun watching you build it!
Pumped for this build! It is awesome to see older engines repurposed. You got it dead right as an American I have never heard of Howard before but excited to learn more about it!
Thanks mate! Looking forward to documenting it
Checking in from Canada, coolest thing
i've seen in a long time coming from an industrial background. Pretty stoked on this
Really want to see the engine coming together too, anything about how you're determining clearances etc would be very interesting
I think you'll find in this old air-cooled agriculture equipment there are huge clearances and tolerance's haha
@@PhilsWorks That will be the challenge too making more power
There was a Kiwi back in the 80s? Tried to stop others from building bikes with these motors.i know there has been a couple built since. Go for it, more power to you😊❤❤
Yeah someone else said this! Not sure how someone can stop others from building them! Good luck to him. I’m going ahead with this one!
@@PhilsWorks Good luck and if you need advice or parts suppliers, I know a bit.
Actually I only registered the design of the bike because you cant stop someone using any engine in a custom vehicle.
Nice clip art Fill
Some of me best work
A bloke named kiwi built the first Howard bike back in the eighties I’ve got the magazine with it in it
Hi Mark, Kiwi here. I built the first one in 1980, the second in 1985 and third in 1987. I still have all 3 and they are in mint condition. You can see the first and third on this page. They are running on the bench after full rebuilds.
@@garybutler2731 great to here you are still about and still have them
ive seen the magazine you have i cannot believe how much stuff you hoard need to put yours in a frame and ride it @markharwood4240
Wow that’s cool Man love the history behind it that you shared…
Checking it out here from
New Zealand very cool… will definitely subscribe to your channel ✌️😎👍
Thank you for the support!
Fucking cool project man! Look forward to more videos on it
Thank you!
Been there done that 30 years ago
The cam setup is interesting
This is gonna be cool as f! 😊
Thank you mate, Has been a long time in the making!
Been a couple of bikes built with Howard v twins 70s and 80s😅
Yes definitely not saying I’m the first! Relax
😎👍😎
You should make a long fork springer for it too..
I’m unsure of frame geometry or front ends. I have an Indian girder laying around. I was thinking of using that
Good 1 Phil , it has been done , but yours will be an interesting one , I've watched a couple of your videos , you've got the goods , ps , I'm glad you only swore a few times 😊 much nicer , cast wise , some new stuff is terrible , it's good to see young blokes doing this stuff , will be watching, and year fk imperial 😝👍
Yes I actually have a buddy who had a Howard chopper many years ago. I have only ever seen photos. Never actually seen a bike or one of these engines running in person. Will be a good experience
Just thinking you could get a pair of bevel gears and turn the magneto 90 degrees so the gearbox fits
Yes I have a few bits and prices iv bought to move the maggy but I feel like it’s changing the engine and I would like to keep it as it comes from the machine
Subbed
Thank you!
The Kiwi dude that built the one that was in early Ozbike claims he has trademarked the use of Howard engines in motorcyles.
The bike was featured twice. First with a Trump frame and then with a custom plunger frame.
Hahaha is that right? Suppose we will see what happens when I build mine then!
I spoke with kiwi about 20 years ago when I was going to build one myself and he said no worries the patten had expired anyway
Jockey shift handle from one of the discarded brass parts!?
Oh shit that’s a good idea! I’ll see what I have left. I can always melt it down and repurpose into a handle
I’ve got to motor’s and a brand new magneto still in the box
Want to sell them?
@@PhilsWorks no sorry mate i inherited them but I would be interested in you building a frame for me the same as yours to suit the howard
how long have you had the motors ?
@@markharwood4240 Many years now, been buying every motor I can find
probably lot of them went to tip's
Looks like a long road
Long road ad leading to a good place!
Show it all....I'm interested
Will do!
Oil pump upgrade a must 😢
Yeah I’m going to keep an eye on the oiling of the engine because I’d like to spin it faster
hoecycle...giggity...love the vids...keep it up
Thank you!
Hey Phil, looking forward to following this build.
I did see a chopper with a Howard motor at a bike meet in Sydney in the mid 90's...
It was getting heaps of attention and it featured in Live To Ride around that time.
I haven't seen it since or another like it.
Love the channel bro 👍
Thank you mate! Hoping to assemble the motor in the coming weeks
**every chopper boi googles Howard engines for sale**
You’re the absolute governor, eh
Hahahaha good luck to them! Iv been doing this for years! Hard to come by
What a cool motor, I’m subscribing so I don’t miss out ✊🏻
Surprised it’s taken this long
I hope you stick to frame castings on the frame build so it all looks period
Think I’ll just fabricate and mould to keep cost down. I feel like people are more interested in a budget build instead of throwing cash at it
@@PhilsWorks I hear ya, just though for this particular build its well deserved, since its really old
Like everyone that knows what a Howard is, before I even watched the vid I was like "lots of torque, no revs, it won't work!"...but you probably can make it work lol
It’s gonna happen mate! Stay tuned
WE have "TILLER'S" in the states MATE...???...ROTFLMAO (-:
What type of front end are you going to use?
Like a durfee girder
Yeah I have an Indian girder laying around. I’m thinking of using that