Ender 3V2 Neo Professional Firmware Tutorial, kinda
ฝัง
- เผยแพร่เมื่อ 3 ม.ค. 2023
- Found a better firmware that works with Ender 3 V2 Neo!
This is an overview, tutorial, me ranting and being all over the place.
github.com/mriscoc/Ender3V2S1
*Start G-Code for v2 Neo (Just copy and paste to Settings, Printer, Manage Printers, Machine Settings):
; Ender 3 Custom Start G-code
G92 E0 ; Reset Extruder
G28; Home all axes
M420 S1 Z2 ; Use mesh level upto 2 mm
M104 S{material_standby_temperature} ; Start heating up the nozzle most of the way
M190 S{material_bed_temperature_layer_0} ; Start heating the bed, wait until target temperature reached
M109 S{material_print_temperature_layer_0} ; Finish heating the nozzle
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X6.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X6.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X6.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X6.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish - เกม
tou forgot to show inserting your phwical probe offsets. If you don't set them then your prints will also be off. Thanks for putting this video up. It was quite helpful,
Could you explain what that means a little more? My prints are a little off centre, and I'm hoping you are describing the fix. Thanks!
I just upgraded it was easy and OMG is bed leveling fast and accurate. So glad you put this video out there! I'm doing my first print with it and the quality seems better, it was great before. I'm 70 years old and was never going to upgrade my firmware but after your video I just had to too! I have an Ender 3 V2 Neo I got it in September so I'm a NOOB.
Glad you were able to install it easily and that it improved your prints! We're all noobs here lol :D
swagger
I wanna be like you, using a printer at 70❤😅
I just followed your video and all the settings you showed even though i flashed firmware from 3-2023 and it prints like a dream on my 3V2 NEO, thank you.
I've just installed this firmware on my Ender 3 v2 NEO and it worked just as good as on my regular Ender 3 v2. Really cool!
Fantastic video! Awesome work from mriscoc & the community as well - thanks to all. I was very sad at not having all the Pro settings. Very easy - worked a treat!
I have been having trouble getting my bed trammed after christmas. used this firmware instead of Juyers..Wow!!! first shot after using all your settings my prints are beautiful. Thank you.
Спасибо за снятое видео! Сделал все как у вас и все работает. У меня GD32F303 RET6 плата 4.2.2. Сначала не устанавливалась но когда применил microSD 4g прошивка установилась благополучно. Удачи вам.
Just followed this tutorial and its incredibly easy to do, highly recommended to do if you have a Ender-3 V2 Neo, theres so many extra options with the Pro firmware than the stock firmware.
Bro your video really helped me in a pinch. Thank you so much for taking the time to go through this.
Thanks for the detailed video as well as responding to the comments. I had the issue where the firmware just made the screen stuck at loading screen and you mentioned in a comment to rename the file after a failure and that did the trick :)
Thanks for this video. My printer bed was very warped, big gap on mid so impossible to print correctly. The mesh has huge differences but with the 9x9 auto mesh i have very good prints now. Thanks again!
What an amazing difference, thankyou for making this install really easy to follow, loving the filament change mode as iv just converted my neo to direct drive.👌🤟🙌
I found that i had to move the purge line over 10mm to the right in Cura as it was printing it off the edge
Thanks, this helped me a lot!
And the new FIrmware is just... WOW
I was intimidated at first but this was actually very easy to install. Thanks for the tips! I love this firmware!!
OMG this is the best thing ever its like going from a floppy disk to a 8 gigs usb stick. i can never go back to stock
OMG. Thank you SO much for this. I tried upgrading my Ender 3 to V2 and I could not get it to print anything anymore and I just about lost my mind lol
You have no idea how much you just improved my life!!!!!! Thank you so much!!! May I ask, does it explain somewhere if I wanted to install a direct drive? Or if I have to move my CR Touch mount to a different location, how to set that up?
Does this firmware have advantages over klipper. I have this same printer and I’m deciding between the two firmware upgrades
I love the software. Just set up on my Ender 3 v2 Neo. I love the Z-offset wizard . your video is great.
I'm giving up on my 3d printer. Just doesn't what to work. Great videos.
Oh man, I'm so glad I found your video. I was getting worried I wouldn't be able to find anything on updating the neo specifically.
On this firmware are you able to adjust the max temperature? I just bought a spider hot end and wanted to change the max temp up to a higher temperature...
I bought the spider hotend for my Neo as well but haven't installed it yet - I noticed the stock fan ends up being lower than the spider hotend, is there a fan replacement or hack I don't know to make the spider work on the Neo with the stock cooling?
Thank you very much. I have a question about the additional G-codes in your start G-code in Cura that you mentioned @22:30. Why do you have them, and could you explain them further?
Hey, I have bought an Ender 3 Max Neo two weeks ago . And I am having problems loading (updating) Firmware, both for the Mainboard and one-button screen. The only one I can load is the V1.4.1_c.BIN. Others more resenter won't flach.
I saw your explanation on TH-cam to load the Professional, but it won't work with me. The one-button screen I can install but not the Mainboard. On the Mainboard there is a processor GN32F 303 RET6, can you check what processor is on your Mainboard. There would be several of the Mainboard V4.2.2 in circulation with different processors, such as GN32F 103 RET6. Possibly that is the problem, Thanks in advance.
Important: For ender 3 v2 Neo, bed size is 220x220, so please change it, xmin and ymin may differ for his config, please check what the values are on your stock firmware and note all the values on a paper, also please check your speed, acceleration and jerk values and ensure they are as per default firmware. You'll have the best time if you do this.😊
you perhaps know these values? I already upgraded to the new firmware and didn't save these values sadly
@@matthewyoussef9774 I take it you have figured that out by now?
On the stock firmware, I can't seem to find the Physical Settings for xmin, xmax, ymin, ymax, etc to record them somewhere before I flash this firmware. I have the Ender-3 V2 Neo.
@@FuzzFPV it will be in motion settings, under settings
@@RayHolland494 Also you can find out x min and y min by just using the move option and moving the print head to the min and max values
I assume this firmware accepts the pause at height and filament change marlin codes?
It's the main reason I want to flash a new firmware.
Thanks tor the video. I was having trouble with my printer and was ready to toss it. This really did the trick.
Same here
I have got a question about Auto Build Mesh with a touch sensor. My bed is slightly off (like a warp in the corner, not false leveled), how do i fix this? Or does the printer do all the work while printing? How do you get this tight tolerances?
aaa I read the wiki
Your amazing for sharing all your setting. Saves me so many hours thank you 🙏 😂
sorry I'm new to the 3d printing world have a ender neo had to put new firmware on the original sd card,first ? do i have to also insert SD card into the control panel as well I can't get the CR auto bed level detection to work like on the original SD card firmware.
Hi! What to do if i have nearly perfect bed tramming, but on the zprobe mesh i clearly can see some areas with warping?
Thanks for this, it helped me out, I appreciate it.
My bed is leveled according to the trim wizard, but my mesh is all f*ed up, any help on that?
Does your Ender v2 NEO motherboard use an STM32 chip or an GD32 ?
You don't need M420, it should be enabled by default within the printer. It doesn't hurt to put on though either. I do personally recommend using a value higher than 2 unless your bed is extremely flat (like .02 deviations at max). 5 would be ok, 10 is the default within Marlin.
You definitely need the m420. Its a very known issue with marlin.
@@tonyspark1071 How does this have anything to do with there being a known issue? You're statement makes no sense in this context.
@@Chris-hn4lp it doesnt automatically run mesh m420 and g28 cancels them. There's no default like you said marlin has issues so like I said its a known issue
Hi, Zeltroix! I have to say that I like your content. Thanks to your videos I started upgrading my E3V2 Neo and by following your steps I got my printer this professional “kinda” firmware and I love it!
But I started digging more and find out what Klipper is and how to get it without Rasberry Pi (e.g. on a thin client like Dell Wyse 3040). Did you think of it maybe?
Thank you, glad you liked my videos! :D
Klipper is not something I have messed around with (yet) so I don't have anything helpful to bring to the table :(
Hi! everthing work fine for me, but the extruder its not in the center of the bed, if a prepare a gcode with cura in position x0,y0,z0 it start printing a little to the lesft, did any1 know why? i put the same numers in physic settings like the video. Thanks !
Ty very much dude.that was what i looking for.
Will this work for printers with the GD32F303 RET6 chip? Most firmware does not support this yet. My understanding is this chip is, and will continue to be used in V2 Neo printers. If your printer is older it may have come with an STM chip which has a lot more firmware support.
It's working on my 3v2 with chip GD32F303 RET6 and sprite extruder upgrade. Just installed this morning
This works great! I'm having the issue where my prints are off-center, everything is moved towards the lower-left corner, and I cannot figure out why. I copied your XY min-max values and your physical settings exactly, but am getting this issue. When I tram, the probe doesn't come close to the edge of the bed, but rather a few inches in.
Try playing with min x and min y positions. Instead of -2 and 0 (like in the clip) set it to something like -7 & -7.
Hey was hoping you could help. So I did this and just added the m240 line and the purge line before the print dispenses to the left off the plate. I went back and copy/paste the whole script you provided in the description and it now purges on the plate just farther left then normal, however I noticed the print isn’t exactly centered and everything seems shifted to the left and maybe slightly forward as well. My question is, is there a way to recenter the bed? Is this done by messing with the X and Y inset? Or maybe another video that touches on this subject you could recommend?
13:39 Have you input the physical settings mentioned here? I had forgotten on a second printer and it was doing the same thing you are describing because we have wrong axis settings. Try it. Good luck
Same thing is happening to me, despite the updated settings. I will be tinkering with this to get it right, and will post any solutions I find here.
@@daniellacasse6003 did you solve this?
@@daniellacasse6003 Did you find a solution?
I have the same problem
Boa tarde amigo, gostei muito deste vídeo, resolveu meu problema, liberou muitas opções de configuração!!!! Muito bom !!!!
Geat job! Thaks a lot! I gues I have to recalibrate e-steps, right?
I am still having issues with my Ender 3 V2 Neo printing to fast after I changed the settings to what you have any suggestions on what I should try next?
Very detailed video ❤❤
How about showing how to just upgrade the stock firmware? The Creality download page is so screwed up there is no way to tell which version to get!
in the GITHUB it stated
"In order to use this firmware, your printer must meet the following requirements:
A compatible control board: Creality 4.2.2, 4.2.3, 4.2.7, V24S1_301 or SKR Mini E3 V3 for Ender series printers with a STM32F103 or STM32F401 SoC.
A DWIN or DACAI color screen with encoder knob. Touch or legacy monocrome screens are not supported."
I have and ender 3 neo v2 similar to most of the comments i read here but my screen is neither DWIN nor DACAI but TJC instead. Will it work for TJC? or it doesnt and most of the Ender3neov2 users received the DWIN/DACAI screen?
I believe you don't need to update the LCD if you have left it with stock firmware. Worst case, update your LCD to the latest official firmware and it should support mriscoc's firmware
i also have a tjc screen. i flashed the firmware and some of the things are quite broken like the mesh viewer but i found on the dev's patreon that tjc screen support will be improved in the next release
Had a question I followed your guide and I have it running and printing fine but I’ve noticed when at the beginning of the print when the printer does the draw line the line is way to far left almost off the bed to the left . Is there something I did wrong ?
Check the description for the start gcode I'm using.
@@Zeltroix yes I updated that as well, thanks I’ll keep doing research
Thank you for this video it had saved me a lot of money....
This is great - i just updated 20 of my V2 NEO printers on farm - great firmware and great tutorial! Thank You!
p.s is there something like this for ender 5 plus?
- traming vizard is great thing i would love to have it on ender 5 plus
Thank you once again!
this helped alot after the firmware on the creality website made my printer be stuck on the creality screen
Hello Dear Friend !
I have to ask you. if you can help me solve the problem that arose after replacing the motherboard on my 3d printer, in particular, the problem is: my old motherboard stopped working, it went bad and I bought a new Creality 4.2.2. this device has a processor with the number (in this order it is written):
GD32F303
RET6
AUJO484
AZ2219
GIGADEVICE
ARM
I connected very correctly and carefully all the wires and turned it on after connecting. I checked and made test movements of the carriage and hot end, everything works well in this case, Z works well too, auto return home also works well, the mechanics are good. but as soon as I want to print something >>> only X and Y axis work well, Z does not work , does not rise up during printing, although the filament arrives and is printed on one layer, I do not understand and do not know how to fix this problem, the warranty period has passed because I have not been at home for a long time and the seller does not return it back.If you can help, or suggest where to look for a way out of this difficult situation, please help, I'm not strong in computers and programming so that I can flash "it" myself, that's why I turned to you with this request! I look forward to good news from you.
BEST REGARDS,
GEORGE!
Thanks for an awesome vid. I'm having an issue where my printer now is offset from centre. Nozzle wipe is right on the left edge of the bed. I did the level bed test print and the squares are offset left. Any ideas on how to remedy this on an Ender 3 V2 Neo?
Let me know when you find out as well please :)
Try playing with min x and min y positions. Instead of -2 and 0 (like in the clip) set it to something like -7 & -7.
Did you end up finding a solution? I have the same issue
Awesome video, you saved me a lot of time and trouble with this tutorial
Will this work with both child that Creality offers on their Neos? I have the Gigadevice with 4.2.2
After auto mesh build how you make configuration to bring bed in perfect level?
Thank you! Thank you and Thank you!
I have a problem and it is that when I start printing, every 30 seconds or so, it makes me a change of filament automatically and I do not know why, does anyone know why?
I just bought an Ender 3v2 Neo a few months ago and I'm beginning to think I should have just bought a lower tier version that has more mod support. Particularly, the hotend/extruder. I'd like to update to the Sprite but it's not exactly compatible with the Neo. There is some who have made it work but with significant setbacks. Such as it's a requirement to remove your SD card before power up, every time. No thanks.
Does your Ender v2 NEO motherboard use an STM32 chip or a GD32 chip? I have a GD32F303 chip, is this software compatible with this chip
It is
So why is it we’re expanding the x and y max positions beyond the plate size?
The bed itself is actually 235mmx235mm, I go a little over on the X until the gantry is just about the touch with where the rollers to make sure as much space is used.
I have followed your video. When I print my purge line is printing off the bed. How do I move it across to the right. Is there some settings for the probe?
Got the same Issue... any fixes yet?
@@sebospfal1733 I just fixed mine a few minutes ago after weeks of struggling, it's the "mesh inset' in the "Advanced - Mesh Leveling - Mesh Inset" After you set his values in the video for the physical size, go into mesh inset, and select 'maximize area', followed by 'center area'. But do this after you already set the min/max XY.
@@danmgcYou’re a life saver man, this is the way, and also change your machine settings in slicer to accommodate the 230x230 build area if it isn’t already!
Can you please link the dual Z rod kit you used for this upgrade for the neo.
I tried this. Got All the way to the screen update, my screen didn’t have all the features in the video. I tried to reload the file and try again, now it won’t turn on past the logo screen.
I hope you can reply me and please reply me , I bought same printer with factory firmware and PLA-LW printing is so bad no matter what I do , do you have same issue , will that firmware update can resolve my problem ?
I don't have experience printing light weight materials, but I did have extrusion issues that were mainly fixed by upgrading to a bimetal heatbreak and converting my machine to direct drive.
HELLO , YOU ARE AWESOME😅. GREAT VIDEO,GREAT TUTORIAL. YOU ARE THE MAN...THANK YOU .. PLEASE DO MORE VIDEOS ..WE'LL APPRECIATE IT.
You z probe then auto bed level build mesh or your mesh is gonna be off ?
I did it just like you said but now my printer will extrude filament but it will not print. Any suggestions?
Same here.
Help me !!! I´ve upgraded the firmware and I get bank screen ! ! I´ve tryed with other firmwares and can´t fix it
I've just installed this firmware on my Ender 3 v2 NEO and it will not home and does not have the extras in the advanced section. any help would be greatly appreciated.
Which version did you install?
This worked great up until my screen just refuses to update. I re-format the card, make sure the folder not the ZIP is copied into removable disk E, and I've tried both Private and DWIN_SET to no avail :( Any chance you know what I'm doing wrong here?
Are you trying to flash using the stock SD card that was shipped with your printer? If so try using a namebrand one like ADATA or Kingstone and make sure it's 32GB max. Some people are having issues flashing with the stock SD card.
Another thing you should try is renaming the file, if it failed to flash it will still detect the same file name and the only way to get it to again is by simply remaining it so it thinks it's a different firmware.
Is it a TJC display? That display (which is what I have) need a special compile to perform correctly. I'm still trying to figure it out. Frustrating for sure.
any tips on trying to make the level mesh good? I got the tramming part but when i do the auto bed mesh it gets numbers all over the place.
If you have a magnetic bed it would be all over the place in some spots, if you can get all the spots with no more the 0.10 variation you will be ok, even up to 0.20 but 0.10 should be the goal. Some beds are just warped. For me the 5x5 mesh works the best.
level your nozzle before the mesh
@@Kami3Kaze Here what I do: Tram you bed to get all the corners leveled next run a auto bed level mesh and finally set your z offset.
Hi! i updated but i have the same options as before, but with the different logos and stuff, i dont have the extra options, any help on that?
nevermind! just jumped to the screen settings lol
Hello i was wondering if you have to have inserted an sd card in order for the settings (mesh etc) to be saved.. Should i do it only on the sd card i use to print my models ?
With the updated professional firmware it stores your mesh in the motherboard, no se card needed.
@@Zeltroix Nice.. Thank you for the videos on the V2 Neo
Quick question of anyone can help plz, when I do the mesh part, I only get colored squares, how do I get the values?
What are your probe settings? Assuming all Ender 3 V2 Neo printers are consistent.
I left those to the default ones it comes with assume you install the correct firmware.
What is the default max extruder temp on this firmware?
Is there a way to raise the temperature max set point?
hi i installed firmware as you told, everything is good with printer I did everything you showed. for cura I copied all your start g code settings and I didn't work, printer start printing before using auto mesh. how could I solve that I am using ender 3 v2 and 4.2.2
If you already ran a mesh on the 3d printer and saved it, the gcode provided will load that mesh without having to auto-level every time before a print.
Alternatively if you want your printer to run a new mesh every time you can replace the M420 S1 Z10 with G29, G29 will run a new mesh every time you start a new print.
@@Zeltroix oh oke i understand, before this one I had G29 line, so should I delete all M420 S1 Z10 line or can't I simply add the G29 before M420 S1 Z10 line, still it didn't work with M420 line I guess right
@@cihangulcan4589 You should only have either the M420 or G29, I recommend you go in your printer to Advanced>Mesh Leveling>Auto Build Mesh and save the mesh, once it's done probing your bed and use the M420 instead of G29 so you don't have to wait for a new mesh to be probed each time you want to print something, it will save you a lot of time but it's up to you :)
@@Zeltroix oke i understand and I guess I will use your settings :) ty for all your help, this upgrade is really well
my printer says printer killed, homing failed, turn off printer, does anyone know why?
How can your y max be less than your y bed size? That shouldn't be possible...? I bet if you were to go into it (click on y bed size) it would correct itself to 229. I have the ender 3 v2 neo and I set my x max pos. to 238 (I believe). 240 would cause the bolt behind hotend to catch/hit the z-axis bracket. I also have -6 for my x-min. I would recommend actually taking a look at Miguel's guide on physical settings. These numbers will most likely work but may be slightly off for some.
That´s correct, the values will vary from user to user.
@@Zeltroix I just got my first 3D printer and am brand new to this, so it's all been an overwhelming amount of info to learn, but your videos have been helpful and I'll continue to watch them. Thank you
@@Zeltroix planning for the future, I'd like to ask, do you have a video or source to point me to for upgrading the hot end to go to 300C? Most importantly I mean so that the firmware supports it. Far as I can tell it limits to 260, but would there be a way to go higher?
I would like to know to on 300 c mod in firmware
Hello I tried to install the firmware on my ender v2 neo yesterday. Didn't work. Have the SD card as you are formatted file on it and in the printer. He then started not only in the display the Creality logo
Have you checked what board you have?
@@Zeltroix yes 4.2.2
@@spidermarvel174 Here's what worked for me on my Ender 3v2. 1. Use an 8gb SD card. 2. Format as Fat32 w/4096 blocks. 3. Copy the firmware to the card. 4. Rename it firmware01.bin. 5. Power off the printer. 6. Insert the SD card. 7. Power on the printer. Firmware should automatically load. Only takes about 5-10 seconds. Creality splash screen will display and then the main menu. 8. Power down the printer. 9. Remove the SD card. 10. Power up the printer and you're on your way.
i had to install the original firmware then flash the custom one for some reason it wouldn't work otherwise it just froze on the lcd screen
Subbed ! Thank you!
if my board is a 4.2.7 then do i use the 427 or the 422
Im stuck on creality screen i tried flashing factory firmware but it didnt help, any kind of help would be appreciated
Try using a different SD, make sure it's s name brand one. Needs to be
i fixed it got a new class 10 sd card
Is there version of this firmware for CR10s Pro?
Hello I have this great firmware I have a v2 neo that I upgrade to a direct drive sprite pro creality.. it works great.. but how do I increase the hot end temperature to 300?
did you run into any problems upgrading to the sprite direct drive?
@@johnfiddlestix4426 minor issues.. I have to print a part and then fix the probe offset.. but not big deal
Great video and very helpful and can I use this G-code if I don't have dual axis thank you.......
Yes, the code just tells you to read the bed mesh you have saved on your printer.
@@muzzaasaurus3675 thank you very much and everything you've done is very well explained thanks for the quick response 👍
Anyone else have an issue where now if you try to print something that is short it will heat up, find home and hen stop saying it completed?
So do I need the entire custom start code you have or can I just take M420? 🤔
You can just replace the G29 with M420, but you may still need to offset your X a little bit otherwise your purge line will not touch your bed.
@@Zeltroix I've got it up and running now already got 5 prints lol
I’m trying to flash my Ceality 4.2.7 mainboard and my touchscreen with Cr touch on a ender 3 v2 can anyone point me in the right direction to get the firmware for the screen and mainboard
i've got tjc display. how can i do the display update? someone plz help
will you be testing out the new titan extruder+ for the neo
Probably not. I will be upgrading to a dual gear extruder soon though (Generic one), hope I can make a video on that :)
is the M420 S1 Z2 code the same as G29??
good day will it work with ender 3 neo too?
Anyway I can make that gcode work on prusa? I get errors :^/
Can you set firmware to auto level before every print? With G29
Trying to work around this too. G29 works with my e3v2 with bl touch, just wont work with the neo with a cr touch. Any advice?
Is it the same motion settings and physical settings for ender 3s1?
Sorry I wouldn't know that, you'd have to check the discussion thread, but if you download the S1 firmware I'm sure you could just leave it as it is.
I followed your steps, and my printer ender 3 v2 neo is not booting, it is stuck on creality logo. I have a 4.2.2 board. how to fix it ? I tried to download the stock firmware and same behavior
Make sure you're formatting your SD card correctly. Also try changing the name of the file. If your machine failed to load it properly and it detects the same file name from the SD card it will ignore to run it.
@@Zeltroix Yes im formatting in FAT32 with 4096 allocation unit, and and safe ejecting the file also renaming the file. but after powering up the print it stucks on creality logo
@@gsxrdafugaii1666 I had the same issue. But it was with the stock SD card, try using a different card preferrable a known brand one.
Also have you tried to boot your printer without the SD card?
@@gsxrdafugaii1666 Looking at the forum some people have similar issue with the OEM SD card that's included with the printer.
Ho do you mod firmware to 300 c im stuck there
Does this work with the Ender 3V2 Neo with the GD32F303 SoC??
Yes it works
how come i can not update my printer, the screen will stuck after TF into the slot
Your micro SD size?