NEW XL Buggy! Unboxing: Team Corally ASUGA XLR 6S Buggy
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Team Corally ASUGA XLR: www.corally.co...
Aussie RC Playground Instagram: www.instagram....
Aussie RC Playground Facebook page: / aussiercplayground
Intro done by IkONz RC: / abemvp100
Best unboxer out here period!! You know how I feel. I just rewatched this and you are the reason I bought this and many trucks.
Ive given corally so much crap for some of their previous offerings, but as soon as i saw this i pre-ordered it and i am not disappointed. They address pretty much everything that was wrong with previous cars and kept all the good stuff. Well done Corally, im actually excited for what you are going to do next!
That's great feedback, thank you for sharing. 😊👍
Great video mate. Can't wait to see it the unforgiving bmx track. Love the bloopers at the end nice touch mate 👍🦘🤪🤣🤣
Haha, thank you. 😁
Wish more RC companies would offer XL cars
Really wish to see more corally and redcat in this hobby.. especially with this all traxxas situation
Traxxas have been seen as the arseole of the hobby for a while
Hello Vaz , hope all is well ? Because of you , i purchased a long way back and in no order , a typhon 3s , typhon 6s , talion , kraton 6s , radix 6 and now i am receiving my asuga tomorrow , and i can not wait to be honest , keep up the great content fella , your channel is awesome , thank you
Awesome review as always Vas. Love the size and the way Team Corally have evolved in the last few years alone. They listen to their users. Looks like a really nice driver. Can't wait to watch you send it.
Thank you Steve. Always appreciate your comments. 😊👍
Great video, one thing good with the new a,b,c and d blocks is that they also mount through the chassis and diff case, this adds even more rigidity and stops the diff case separating from the chassi on hard landings.
Thanks and I think you're right. 😎👍
@@AussieRCPlayground first time i saw the new hinge pin holders I asked "you not gonna have a third bolt in the chassie?" They said no but I emphasized it would benefit. And super happy they listened
Nice, the Roller sounds tempting. The Hobbywing 4985 motor & max6 ESC, would be awesome in this.
Great video Vas!! This Asuga looks really good. 👍 I wouldn’t mind getting one. 👊💪The outtakes at the end. I love em! More please!! 🤣
Corally need to fit serrated wheel nuts stock on all there cars, fit some velcro along the lower sides of the body & the along the chassis side skirts to stop the body flopping around. I will also be going with the green Asuga when I order one, I will also upgrade to green serrated wheel nuts.
The serrated wheel nuts is something I keep forgetting to mention in my wishlist, thank you for reminding me. 😎👍
Your unboxing videos and attention to detail are amongst the best imo 🇬🇧🇬🇧
Thank you very much Paul, really appreciate that. 😊👍
Beast of a Buggy !. I really like how it’s been beefed up, along with the bracing. Promises to be a tough cookie. Great un boxing video with the obligatory box smash 👍. Plastic bags and static , a sticky problem 😂. Looking forward to run video Vas .
Haha, thanks Alan. 😁👍
Thanks for your excellent work. You're reviews are one of the best you can wish for.
Thank you very much. 🙏😊
Great and thorough review. I might buy this car next summer (in Europe).
Hasn’t done leg day. Nice one
I just got mine the other week. It's awesome, I'm loving it.
Looking forward to see what you think when you take it out for a bash.
Great unboxing as always 👍🏼
Thank you. I can't wait to drive it. :)
@@AussieRCPlayground Enjoy
Yes it is a day to see a videos from you 😀 RC playground bas all way to see your videos on TH-cam 💯🇦🇺🇺🇲🤝
Awesome, thank you! 😊👍
Superb unboxing👍 Can't wait to see this hit the bmx track. And those bloopers, hilarious😆
Thank you so much 😁 Yeah, bringing the bloopers back whenever there's a couple of funny ones.
Really nice buggy👌looking forward to receive mine soon🎉
Loving mine so far, Hw Max6 1650kv combo.
To be fair, Doesnt need roof skids-the roof doesnt touch the floor when its upside down, its the wing and front shock caps that hit the floor. (if its the same as the Python which it probably is)
Actually, the roof, wing and front tower are all at the same level, so yes, in a chrash, the roof will likely hit and scrape along the ground. 😉
The speed table of the 46t gear is a copy/paste error from Corally. This table should not be in for the asuga, it belongs to the Radix 6s. (According to Corally)
Can you please list the diameter and width measurements for the tires? I'm thinking they might be a good fit for the Arrma Mojave. Thanks!
Diameter is 13cm X 5.2cm (or 130mm X 52mm) (or 5.11in X 2.04in). Hope that helps. 🙂
@@AussieRCPlayground it does, thanks!
Hi I got my asuga 3 weeks ago I got the roller put a 4282 motor in and a max8 still running the stock 13 tooth pinion what a beast it is 6s off road 76kph the only thing that I found that the shock's are bit 2 stiff put a lower grade oil in it soaks up the bumps better than before all in all it's so much fun just don't stand behind it when you punch the throttle it's amazing what them tyres will through at you 10 out of 10 for the asuga I think as always buddy your videos are awesome 👍😎
Thank you very much and glad to hear you're enjoying your ASUGA XLR. Hoping this rain will clear Soni can drive mine also. 😁
Great video mate, i have brought the Roller as i have a max 6 combo sitting in my workshop looking for a new home 😜
It's gonna be nuts with the Max6 in there. 😁👍
Nice car 👍😃
Hi. Great unboxing video !
Does the 52 T spur is a mode one spur ? Does it have space to fit a 22 T pinion gear ?
Hi I’m a newbie I just ordered. Where can I order 15 tooth pinion? Hard to change ? Can I do by myself? Or have a rc shop do? How long does it take ? Amy videos I can watch on TH-cam on how to do ? Tool kit recommendations to buy?
So you said it’s a little bit bigger than 8th scale? How does that work with compatibility for new tires for example? Apart from extreme durability the biggest pro of a buggy is the amazing tire choice. To me at least.
It looks like a very solid rc. Hopefully the powerfull Corally electronics can handle the extra weight it surely has. Let’s see it run!
Well, in regards to tyres, there are some choices, but not many as this is a unique size. You'll need to employ a trial & error strategy to find tyres that work.
As for the electrics, there should be zero issues running them in this car as truggies like the Shogun and MTs like the Kronos are slightly bigger and use the same power system without any issues. So I'm very confident the stock electronics will work just fine in this car.
Good grief that's nice
Thanks. :)
Arma kraton 1/5exb. Or traxxas xrt or this. Whats better to have?
overall XRT is the best imo, but i dont like the look
I'll never recommend the XRT as it's too expensive here and T-brand are not a company I like to support.
It makes no sense to compare a 1/5 scale truggy and the ASUGA as they are totally different cars, with different prices, different sizes and different capabilities. But if bang for buck is what you're after, the ASUGA wins without a doubt.
@@kulas4759 for fox sake avoid traxxas at any cost!
I almost bought xrt but my near hobby shop and dad had talk some sense into me so I bought arrma exb outcast 8s roller $599.99 😂
spart parts very expensive
Sorry late to introduction, how do you feel about the spur gear not exposed to mother nature with the open slot in chassis.