Kinda breezed over that retention ring. Been through two of them now trying to make it work. Word on the street is Yam techs don't even bother. Can you confirm? 2009 Yam Warrior Xv1700
Hi, I just bought a road star 1700. Planning on doing some repairs on it. Whats the deal with that loose screw/shaft that goes through the little bearing you changed? (5:50 to 6:00 minute) I see that that piece has a thread, or at least looks like, but there's no nut, it's just like hanging loose there.
Having same problem. Replaced everything and now it feels like it's locked up. I havent started it or even pu t oil back in it. Was trying to retention the cable and haven't got it yet.
Hello. Have a good day. Can you give me some advise about my warrior? When I have in gear while riding have some noise like iron on iron but in neutral have no sound.I think its coming from clutch or gear box. What do you think? what can it be? Thanks further 🙏
I did this exactly like you have done. My clutch lever keeps being wayyy to loose. Ive adjusted it in all different ways but it wont tighten at all. Any ideas?
I know down by the clutch, it seems the spring isnt engaging to bring it back so when I pull the lever, it just stays in position. Maybe I did something wrong or need a new spring now that the plates are replaced?
@@15LoydsCustom I ended up getting it. I didnt realize that the the plate that holds the clutchplates in was supposed to click into place to cover the gap.
@jusdivinum3354 the end. We all want to see the readjustment of the cable an such. Seems everyone is having the same problem at the end with retensioning.
I noticed you didn't line up the notched tab properly on your friction plate at 4:26 what's the reason for that? Second of all instead of playing stupid ass music the whole video why not explain what you're doing and why. This could've been a good video if you had done that instead
Cut the damn music and explain some stuff I agree with this guy. The song was stupid and sometimes you need that little extra detail. Especially when you got it sped up so fast you gotta rewind the damn video 100 times to make sure you seen it all. Blink and kiss something crucial
Kinda breezed over that retention ring. Been through two of them now trying to make it work. Word on the street is Yam techs don't even bother. Can you confirm?
2009 Yam Warrior Xv1700
Thanks for sharing man
Hello thanks for watching bro! More videos soon
grabeha.. like new napud dol.. nice ka one!! rs pirmi dol..
Hello idol thanks for watching ikaw sad rs permi
Hello idol thanks for watching ikaw sad rs permi
Question. At 1.05 you point out a wire on the back side of the clutch cover. Is that the pick up coil?
Hello bro yes absolutely pickup oil/pulser coil by the way thanks for watching more videos soon. Keep safe 🤜🤛
Hi, I just bought a road star 1700.
Planning on doing some repairs on it.
Whats the deal with that loose screw/shaft that goes through the little bearing you changed? (5:50 to 6:00 minute) I see that that piece has a thread, or at least looks like, but there's no nut, it's just like hanging loose there.
Hi bro that shaft is called clutch coupling pin/rod use to engage the clutch plates to work! Thanks for watching more videos soon 🤜🤛
Nice bike where can I find the front headlight turn signal setup you got your roadstar? Thanks for the video 🙏
Thanks for watching bro! You can check the part at RevZilla.com
What light bar is that? I couldn’t fit Harley bulbs in my OEM light bar. I need a new one since the wreck anyways…
Hello check Amazon online sale
Could anyone help and put a link to headlights like he’s got with the metal bar
Check RevZilla bro
Thank God for mute! Good video, music is terrible
Sooo question, might be a dumb one but do you need to start the bike inorder to get pressure to the cable?
Having same problem. Replaced everything and now it feels like it's locked up. I havent started it or even pu t oil back in it. Was trying to retention the cable and haven't got it yet.
Nop!
Hello. Have a good day.
Can you give me some advise about my warrior? When I have in gear while riding have some noise like iron on iron but in neutral have no sound.I think its coming from clutch or gear box. What do you think? what can it be?
Thanks further 🙏
Hello check first if all the gears are having noise? From 1-6 gears
@@15LoydsCustom all gear having noise. Only when in gear ⚙️
I did this exactly like you have done. My clutch lever keeps being wayyy to loose. Ive adjusted it in all different ways but it wont tighten at all. Any ideas?
I know down by the clutch, it seems the spring isnt engaging to bring it back so when I pull the lever, it just stays in position. Maybe I did something wrong or need a new spring now that the plates are replaced?
Adjust the arm/lever in the engine
@@15LoydsCustom I ended up getting it. I didnt realize that the the plate that holds the clutchplates in was supposed to click into place to cover the gap.
Do u really need that wire part? I’m replacing my clutch and i didn’t put it back in cause it confused me
Yes because it will deformed when you change the clutch plate
hi what year is the road star 1700? is it application same as the 2004 warrior 1700? thnx
Hello it's looks the same parts it's 2008-2010 model
Is there a venting process required?
Nope
Idol ano kapareha clutch lining nya idol
Hi! Thanx for a great video. How do I know if I only need to change the friction plates or both friction plates and steel plates?
Hello bro thanks for watching! It's better if you change both plates kit
What kit did you get? Where can i get the kit at?
Hello we ordered from Yamaha Texas
You cay also check at Amazon
Cuál es el número de pieza de la junta para sellar?
Thanks for watching bro
Wheres the end? Literally left off where my problem is.
Slide clutch lining
Unsay nindot nga pang change oil idol?
Hello idol shell advance or Castrol mao na gamit nako naa sad nay fully synthetic oils sila
Good video but the music sucks 😔
Thanks for watching
Terrible music, why?
Sorry
Dude..lose the music
Maybe it's copyright music
I guess there's nothing we can do then.
You skipped alot of very important things but thanks for the video
Thanks for watching 🤜🤛
What did he skip? I'm getting ready to do mine this weekend
@jusdivinum3354 the end. We all want to see the readjustment of the cable an such. Seems everyone is having the same problem at the end with retensioning.
I noticed you didn't line up the notched tab properly on your friction plate at 4:26 what's the reason for that? Second of all instead of playing stupid ass music the whole video why not explain what you're doing and why. This could've been a good video if you had done that instead
This video left me in a way worse spot than when I started. Cut the music and actually explain the important details.
Just watch the video 🤜🤛
Cut the damn music and explain some stuff I agree with this guy. The song was stupid and sometimes you need that little extra detail. Especially when you got it sped up so fast you gotta rewind the damn video 100 times to make sure you seen it all. Blink and kiss something crucial