How come the only way I could add a comment was to reply to one? I hate it when YT-ers do that! All I was gonna say is that I like your videos, I've been working with embedded systems for decades (since mid 80s) and you don't look like a sasquatch at all! If they looked like you, ppl prolly wouldn't be scared of 'em. I'm not scared, I'd seriously like to meet one. 🤪 👍👍👍.
@@TalkingSasquach happy to contribute! I was wondering about the cardputer, but I read farther in the comments and saw it. That’s awesome that it works on the cardputer too. You’re always who I recommend to a follower asking questions I don’t know the answers to... It’s always “you need to check out the squach videos”😆
Quick question, I use the Flipper0 with the WiFi Dev Board (exactly like you showed in the video). After I've installed everything my flipper couldn't start the app and got the error message that some API didn't match. So I updated my firmware and did everything again. Now my flipper crashes when I open the fresh installed app (-> furi_check failed). Could it be that ghostesp just doesn't work on the RogueMaster Firmware yet?
I asked in another comment but I don’t want it to get buried. Can you show us more of the cardputers new apps and capabilities? I’m really interested in the LoRa app.
I am interested in this firmware because i am compiling marauder on my own but i don't see a hash or checksum to verify my download for ghost esp. do they have a pgp certificate or a checksum I could compare for validity?
hey i have a question , i have the JCK mini board as well , can i go back and forth between JCK and the Spooky interface or does me writing the spooky interface over write the JCK interface make it so i have to flash it all over again ?
Is this an application/repository we can just install and use on the Flipper so long as we have a wifi devboard? Or do we need to purchase the hardware and load the firmware onto that? (Apologies if this is a dumb question, I'm not so well versed in hardware) Very impressive nonetheless, always wanted the capability to be able to do man-in-the-middle with the Flipper, but never knew it was possible.
@@cathal357 good question! Is the board he loads the project on in the end of the video (using spacehun’s flasher) just a dev board? He is never clear on that. If so, then yes that’s all you need.
Great that ppl are starting to notice the ESP32 C3 Supermini. Only 6 months ago you could only get info from translated sources that weren't always easy to follow. My fault for not being multi-lingual!
Hey I love your videos. You’re the reason I’ve developed a huge interest in frequencies and testing. And it’s actually been a huge help with my business. Is there a cheaper option or something like this c3 that you would recommend?
Awesome thank you! Also do either of you know if I’m able to flash the Dr. Bork board by Kasiin? I believe I got it from Amazon. It doesn’t have any port to plug into. The only connectors it has is the GPIO and the sma connector for a antenna.
I have a dr Bork board by Kasiin I think I got it on Amazon. It doesn’t have a type c port it only has the GPIO pins is there anyway I can use ghost esp with this board? Please help I would love to use Ghost esp
So i followed the video and it seems i don't have a esp file. I put it in GPIO and when i click it it just crashes my flipper every time i try it. Please help lol
@ Thank you for the reply! I just figured out I wasn’t on the most updated version of momentum. I updated it and it works perfectly fine now. I thought since I had momentum it would still work but apparently momentum needed to be updated to the lasted version of it for this to work. If you have a previous version of momentum it will just crash your flipper. My fault for not checking if I was updated to the newest version. I love your videos and they have truly helped me through my flipper zero experience! Thank you for all that you do!!!
Hey what sup sasquatch,,,hey can u add that to the flipper dev board,,just curious or on the new board bffb...lol 🤣 lmk if u can ..were to find one....
CYDs are already supported in the webflasher. Even more exotic ones like the larger 3.2 inch single USB-C ones with capacitive touch and onboard battery connector/charge functionality.
Total Nube!!!! Can you please refer to a video walkthrew of how to do this. Just got my esp32wroonD yesterday and have no clue as to wtf I'm doing. Thanks
@@TalkingSasquach From WIKI Hellfire Club was a term used to describe several exclusive clubs for high-society rakes established in Great Britain and Ireland in the 18th Century. The name most commonly refers to Francis Dashwood's Order of the Friars of St. Francis of Wycombe.[1] Such clubs, rumour had it, served as the meeting places of "persons of quality"[2] who wished to take part in what were socially perceived as immoral acts, and the members were often involved in politics. Neither the activities nor membership of the clubs are easy to ascertain. The clubs allegedly had distant ties to an elite society known only as "The Order of the Second Circle". btw, Subscribed :)
Hi im your biggest fan and aim a fan flipper zer but I don’t have one and it’s my birthday in like a 2 / 1 day I was hoping if you can send me one for my birthday I don’t have a flipper but I’m a huge fan and I love you videos so why not ask😅 hop you can send one to me it will make my day
Spooky was Spooky has been working hard on this project. Remember, every time this firmware is ported to a new device, there will be random bugs that will pop up. It's the nature of being so accessible.
thats more of a hardware limitation, not software limitation. the ESP C5 isn't out yet which would be the board that supports 5g networks, currently the GhostESP board from rabbit labs is using the C6 which supports wifi 6 and 2.4ghz but not 5, so better than your typical ESP32 S2, S3, or Wroom model which only does 2.4 and some with bluetooth (S2 has no BLE capabilities) once the C5 is out spooky will be working on porting ghostESP over there too
More Boards will be supported in the future
I Plan to support as many boards as I can.
you guys are the best
thank you sasquatch for the amazing video
Thanks for being so involved with the community!!
Hiw would one go about flashing this onto a cardputer? Should I try that flasher you showed with your flipper?
Does it work on esp32-S3FN8?
People would love this on the Cardputer.
I hope you get a few boards and sell them make some money off your hard work
How come the only way I could add a comment was to reply to one?
I hate it when YT-ers do that!
All I was gonna say is that I like your videos, I've been working with embedded systems for decades (since mid 80s) and you don't look like a sasquatch at all!
If they looked like you, ppl prolly wouldn't be scared of 'em.
I'm not scared, I'd seriously like to meet one. 🤪
👍👍👍.
This is freakin awesome timing as I had a ESP32 C3 Super Mini delivered yesterday!
Keep up the great content Squach
Thanks! I appreciate you!!
@@TalkingSasquach happy to contribute! I was wondering about the cardputer, but I read farther in the comments and saw it. That’s awesome that it works on the cardputer too. You’re always who I recommend to a follower asking questions I don’t know the answers to... It’s always “you need to check out the squach videos”😆
SPOOKY IS THE SHIT . Can't wait for my board.
He's been doing really great work!
@@TalkingSasquach Ya he's been going non-stop. Amazing video Sas. I know Spooky was just as excited for it as I was.
I found you from your Cardputer video, but stuck around for everything else! Love the channel, gonna find myself binging some videos I bet lol
I appreciate you!!
Awesome visual effects going on! 🎉
I had way too much fun making this, I may have gotten carried away!
Your videos get better all the time! Keep growing and showing new tech! You rock! ❤
I appreciate you!
I love this guy’s videos, dude is hella chill too
Interesting 🤔
Btw Happy Halloween 👻 👾
What’s the lowdown on that C3 case?
Quick question, I use the Flipper0 with the WiFi Dev Board (exactly like you showed in the video). After I've installed everything my flipper couldn't start the app and got the error message that some API didn't match. So I updated my firmware and did everything again. Now my flipper crashes when I open the fresh installed app (-> furi_check failed). Could it be that ghostesp just doesn't work on the RogueMaster Firmware yet?
I asked in another comment but I don’t want it to get buried.
Can you show us more of the cardputers new apps and capabilities?
I’m really interested in the LoRa app.
Yes! This is definitely something I want to revisit, I'm just hoping for a new rev of the cardputer
Great video. How do I builld the ESP32 GPS like what you showed in the beginning of the video? What hardware did you use?
I am interested in this firmware because i am compiling marauder on my own but i don't see a hash or checksum to verify my download for ghost esp. do they have a pgp certificate or a checksum I could compare for validity?
The only friendly face explaining things plainly
Be carefull out there
Awesome video! Koko now has a competitor 😏
Where did you get the file for the esp32 C3 case
Any schematic available to make the board for flipper ?
Any idea if this will be supported by the m5stack core2 eventually?
hey i have a question , i have the JCK mini board as well , can i go back and forth between JCK and the Spooky interface or does me writing the spooky interface over write the JCK interface make it so i have to flash it all over again ?
What board do you recommend to support 5GHz Wi-Fi 6/7? The ESP32 I don't believe supports 5GHz WiFi
Is this an application/repository we can just install and use on the Flipper so long as we have a wifi devboard? Or do we need to purchase the hardware and load the firmware onto that? (Apologies if this is a dumb question, I'm not so well versed in hardware)
Very impressive nonetheless, always wanted the capability to be able to do man-in-the-middle with the Flipper, but never knew it was possible.
@@cathal357 good question! Is the board he loads the project on in the end of the video (using spacehun’s flasher) just a dev board? He is never clear on that. If so, then yes that’s all you need.
Great that ppl are starting to notice the ESP32 C3 Supermini. Only 6 months ago you could only get info from translated sources that weren't always easy to follow. My fault for not being multi-lingual!
so how do we get one and what board should it be used on?
With 1.3.5 which asset pack for flipper and dev board? Or do I go older?
l love your flipper zero videos
Thanks! I appreciate you!
My ESP32 C6 isn't working for this keeps connecting and disconnecting
Where are the credentials stored or shown when using the esp32?
esp32 wrover dev board gets stuck on serial port opened
Thank you for all that you do
Does it do anything i cant already do with my phone?
Hey I love your videos. You’re the reason I’ve developed a huge interest in frequencies and testing. And it’s actually been a huge help with my business. Is there a cheaper option or something like this c3 that you would recommend?
esp32 CYD
fantastic advice
Awesome thank you! Also do either of you know if I’m able to flash the Dr. Bork board by Kasiin? I believe I got it from Amazon. It doesn’t have any port to plug into. The only connectors it has is the GPIO and the sma connector for a antenna.
can i flash esp 32 Wroom cuz for me it doesent work please tell me how
So this does not work with Unleashed?
Cardputer support?
Yes
Thank god
Any reason to go with marauder instead of ghost esp?
Try them both but GhostESP has pretty much all the same features as Marauder
@@TalkingSasquach cool, I’ll give them both a try
Timmy is that you
I have a dr Bork board by Kasiin I think I got it on Amazon. It doesn’t have a type c port it only has the GPIO pins is there anyway I can use ghost esp with this board? Please help I would love to use Ghost esp
You can but it's gonna be more work. You'll have to download bins from Spooky's GitHub and flash them with the Flipper with ESP Flasher
Thanks bro 😊
Nice. I need this 🔥
It's hard to touch the screen ,,need to develop this firmware
So i followed the video and it seems i don't have a esp file. I put it in GPIO and when i click it it just crashes my flipper every time i try it. Please help lol
What firmware are you using? That FAP is compiled for Momentum
@ Thank you for the reply! I just figured out I wasn’t on the most updated version of momentum. I updated it and it works perfectly fine now. I thought since I had momentum it would still work but apparently momentum needed to be updated to the lasted version of it for this to work. If you have a previous version of momentum it will just crash your flipper. My fault for not checking if I was updated to the newest version. I love your videos and they have truly helped me through my flipper zero experience! Thank you for all that you do!!!
does it work with the esp8266?
Coincidentally I bought home several 32s just yesterday
Things just tend it align like that!
can you do a video of how to use the hack rf with the portapackH2+
Dudeeee!
@@smegheadGOAT what
English England is here
Ooo, this sounds perfect for my cardputer" wonder if it works there🤔
It does!!
@@TalkingSasquach Hell yes!
I seen the card outer has a LoRa app, can you show us how to use it?
@@user-lg7gp6fg3g im sure you need the module to plug in the grove port... There's a ton of sensors and stuff for that port on the m5 page, its insane
Very cool!
Has anyone tried this on the yello board ?
My ghost esp ap has a password i cant find a default password listed anywhere
That's really strange, it should be an open access point!
Where can I get the app download?
at 15:38 the link pops up to download the fap file
Can you flash that to a Mayhem board?
😊
What is the password to access ghostnet?
i need more options for sub-ghz not wifi
So im on ghost discord , there is NO NEWS SECTION
could i get a hey?
Hey!
Hey
@@amutking hey
Hey
Hey hey 👋
Hey what sup sasquatch,,,hey can u add that to the flipper dev board,,just curious or on the new board bffb...lol 🤣 lmk if u can ..were to find one....
Yes! I go over installing it to the official WiFi board later in the video
nice one
This is what HackRF should be doing, but it's so broken.
Imagine if you had neighbor that has these hacking devices
(am that neighbor btw😈)
Mack flipper zero using esp12f
make it for cheep yellow display cheers
You can!!
CYDs are already supported in the webflasher. Even more exotic ones like the larger 3.2 inch single USB-C ones with capacitive touch and onboard battery connector/charge functionality.
Total Nube!!!!
Can you please refer to a video walkthrew of how to do this. Just got my esp32wroonD yesterday and have no clue as to wtf I'm doing.
Thanks
Howdy
FYI: The Hellfire Club was the OG Epstein Island.
It's from Stranger Things
@@TalkingSasquach From WIKI Hellfire Club was a term used to describe several exclusive clubs for high-society rakes established in Great Britain and Ireland in the 18th Century. The name most commonly refers to Francis Dashwood's Order of the Friars of St. Francis of Wycombe.[1] Such clubs, rumour had it, served as the meeting places of "persons of quality"[2] who wished to take part in what were socially perceived as immoral acts, and the members were often involved in politics. Neither the activities nor membership of the clubs are easy to ascertain. The clubs allegedly had distant ties to an elite society known only as "The Order of the Second Circle". btw, Subscribed :)
@@PitFighter2007 Thanks for the sub! And yeah, I'll prob discontinue that shirt!
First👀
Hell yeah! Nailed it!!
Hi Jessica my name is Victor
Hi Victor my name is Jessica
Hi
Hey!!
Kinda effed up you wearing a Hellfire club shirt. Do you even know the shit that went down there?
It's from Stranger Things
Hi im your biggest fan and aim a fan flipper zer but I don’t have one and it’s my birthday in like a 2 / 1 day I was hoping if you can send me one for my birthday I don’t have a flipper but I’m a huge fan and I love you videos so why not ask😅 hop you can send one to me it will make my day
I’m actually his biggest fan.
All I heard .. Ohh it's not working here . There's a bug there , Security reasons . Pretty lame ! Goode job on getting on the influencer bullshit ....
Spooky was Spooky has been working hard on this project. Remember, every time this firmware is ported to a new device, there will be random bugs that will pop up. It's the nature of being so accessible.
not next generation unless it can hack 5ghz
thats more of a hardware limitation, not software limitation.
the ESP C5 isn't out yet which would be the board that supports 5g networks, currently the GhostESP board from rabbit labs is using the C6 which supports wifi 6 and 2.4ghz but not 5, so better than your typical ESP32 S2, S3, or Wroom model which only does 2.4 and some with bluetooth (S2 has no BLE capabilities)
once the C5 is out spooky will be working on porting ghostESP over there too
stop saying cool ffs
I'll try, no guarantees
Anybody not find anything but the rules in the Ghost ESP Discord? I am unable to find the .fap file...
You have to agree to the rules to gain access to the Discord
at 15:38 the link pops up to download the fap file
Can’t find the flipper app fap file on the discord link you shared it just shows the rules channel on that
at 15:38 the link pops up to download the fap file
@@chris12x1 didn’t notice that thanks for the help