XLNT!!! One of the better videos on the subject. The first time I've seen the shift linkage mentioned and removed. I'm doing mine and all the other videos make a big deal of having to remove the exhaust pipes or raise the rear of the transmission. They kind of gloss over the fact that the shift linkage bracket is more of an obstacle than the exhaust. That is what has been holding me up so far. After seeing this video, I know what to do to get the pan all the way off. Thank you very much for making a superior video that exhibits the 3 P's of good work: Patience, Persistence, and Perseverance. May the rest of your labors go as smoothly. P.S. Killer torque wrench!
Thank you for the great video. I ended up just bending the bracket out of the way rather than remove it. When done I just bent it back to where it was. Easy peasy
remove shift link bracket first before removing the trans pan. If you want an easier trans service next time, make sure to use rtv to seal the pan and apply it to the transmission instead of the pan that way you don't mess up your seal when you put the pan on the truck because it's a tight squeeze between the exhaust and the trans and you will touch the pan lip on the inside of the trans which will transfer rtv. The RTV is because over time an actual gasket, like the cheap paper ones mold and stick to the pan making it a nightmare to remove, rtv you can once over with a die grinder quick style and rinse the pan after. Little tricks make life much more easy working on these trucks.
Looks like a Haynes Manual for GMC/Chevy trucks. You can find them at most auto parts stores and on Amazon. They are specific to each model year range. There are also Chilton's Manuals, which ib my opinion, are laid out a little better. Either one is a very good book to have if you do a lot of vehicle maintenance yourself.
yo tengo una silverado 2009 con motor 5.3L pero la transmission abienta el cambio de chingaso entre despuea de arrancarme. y no se si cambiando el eceite de la transmission resuelva el problema.....
Juan Hinojosa si se arregló con el cambio de aceite? Porque mi troka también anda asiendo lo mismo, que avienta el primer cambio resio y los restos bien suaves
good content but you could have done this in 10 minutes. why spend so much time on the torx screw holding the bracket? that should have been 10 seconds, not 3 minutes. same with the manual. same with the filling of fluid. just learn to cut down your content to the relevant stuff and your content is the best out there.
If you ever want to torture somebody show them this video 🤣the guy said or something like that? That right there made me not even want to proceed at all 🤦♂️
XLNT!!! One of the better videos on the subject. The first time I've seen the shift linkage mentioned and removed. I'm doing mine and all the other videos make a big deal of having to remove the exhaust pipes or raise the rear of the transmission. They kind of gloss over the fact that the shift linkage bracket is more of an obstacle than the exhaust. That is what has been holding me up so far. After seeing this video, I know what to do to get the pan all the way off.
Thank you very much for making a superior video that exhibits the 3 P's of good work: Patience, Persistence, and Perseverance.
May the rest of your labors go as smoothly.
P.S. Killer torque wrench!
Bro, you made the best video on this procedure. Extremely easy to follow and very informative! Thank you so much.
Thanks for this video. I changed my transmission fluid in my Silverado today using your video.
Thank you for the great video. I ended up just bending the bracket out of the way rather than remove it. When done I just bent it back to where it was. Easy peasy
I did the same thing!!! After i went to the store to get the t40 socket!!! 👍🤝
Video really helped me replace my transmission fluid, Filter & remove shifter cable. A big heads up 👍🏽
sounds like good info ,especially removing the shift bracket to get pan off.
muy bien trabajo, GRACIOS
Great job thank you for sharing this information
Very well done video! I have to tackle this as well because my pans gasket is leaking for some reason.
FrewSlinger thanks 👍👍
remove shift link bracket first before removing the trans pan. If you want an easier trans service next time, make sure to use rtv to seal the pan and apply it to the transmission instead of the pan that way you don't mess up your seal when you put the pan on the truck because it's a tight squeeze between the exhaust and the trans and you will touch the pan lip on the inside of the trans which will transfer rtv. The RTV is because over time an actual gasket, like the cheap paper ones mold and stick to the pan making it a nightmare to remove, rtv you can once over with a die grinder quick style and rinse the pan after. Little tricks make life much more easy working on these trucks.
Thank you for the video - I will be doing this soon on my Chevy Siverado 1500
Excellent video. Great advice and explanations.
Nice and tight. Great video. Keep up the good work. Nice and clean nice and tight.
11:13 The color of the oil is still red ..
I think it is still valid .
Yes, still good but my neighbor still wanted to change the oil.
Great video amigo! Saludos desde Texas.
thanks amigo, aquí también estamos en Dallas,tx
Disculpe cuantos litros se lleva la transmicion
@@alex55631 no recuerdo bien pero creo como 5-6 quartos
great video minus the gasket scraping, made me cringe lol
Buen video amigaso gracias y saludos desde California!!
Gracias Amigo bien trabajo!!
De nada amigo 👍👍
How you got all the remaining fluid out the transmission the fluid thats in the pan is less than half if the fluid in the transmission
Good information
Thanks
Jack Smith You're welcome 👍👍
Muy buen video!
gracias 👍
Excellente"
Where did you buy the book at and how much was it?
Looks like the small book that usually comes with the truck in the glove box.
Looks like a Haynes Manual for GMC/Chevy trucks. You can find them at most auto parts stores and on Amazon. They are specific to each model year range. There are also Chilton's Manuals, which ib my opinion, are laid out a little better. Either one is a very good book to have if you do a lot of vehicle maintenance yourself.
What book are you using
yo tengo una silverado 2009 con motor 5.3L pero la transmission abienta el cambio de chingaso entre despuea de arrancarme. y no se si cambiando el eceite de la transmission resuelva el problema.....
Cambia el fluido y talvez se arregle, tambien checa la cruzeta y soporte del motor
@@RescueMoversDFW ok gracias... entre 1ra y 2nda es cuando abienta el cambio muy brusco... todos los.demas los abienta normal y suaves..
@@juanhinojosa9784 checa en parqueo primero y fijate si se mueve el motor o da el jaloneo metiendo velocidad parqueado
Juan Hinojosa si se arregló con el cambio de aceite? Porque mi troka también anda asiendo lo mismo, que avienta el primer cambio resio y los restos bien suaves
Job well "Perfecto"
thanks :)
I put 6 quarts on my truck 4.8 v8 you think I should take some out ?
Just wondering if you had to remove any? I kinda put 6 quarts on mine as well
I just checked the manual & it says Dexron IV not VI
good content but you could have done this in 10 minutes. why spend so much time on the torx screw holding the bracket? that should have been 10 seconds, not 3 minutes. same with the manual. same with the filling of fluid. just learn to cut down your content to the relevant stuff and your content is the best out there.
Because people like me that aren't the best with maintenance will still take 3x as long as this video and the more details the better
it's like your comment! too long for nothing...
como sabes que clase de transmission tiene la camioneta?
Con el vin number
@@RescueMoversDFW k número o letra busco en el vin
Inn-te-threstink bee-de-o. Not bad jawb😁
The title says 2011 but he says 2008?
Give up
Is this truck 4x4?
Tino nope
Daniel Rescue Movers okay thanks this one confused me too because I didn't realize it's a 4l60. The oil pan is more difficukt to remove on the 6l80.
it shouldn't
th-cam.com/video/7Aon9FL9u_0/w-d-xo.html they show it here
Thats a newer model of a silverado they diffrent.
If you ever want to torture somebody show them this video 🤣the guy said or something like that? That right there made me not even want to proceed at all 🤦♂️
Terrible man