Thank you all for kind words and feedback! We are working hard on getting production up to speed and hope to have more consistent stock each week starting end of May 2024. You can subscribe to stock updates on the product page by clicking the "Notify When Available" button.
I got mine all set up today! It's killer! Something to note for those installing though: - Before bolting in the CineBack to the SmallRig cage, I would test installing the bolts into the cage and tighten them. Then bolt the cage and CineBack together. It helps prevent the threads in the cage from stripping, as I noticed a lot of resistance when trying to bolt the cage to the CineBack and it wanted to strip. - I'd avoid trying to tighten any bolts going into the 3D printed material, further than they are now. It could potentially strip the threads in the plastic.
So… its sold out. Will you make the print files avaliable? At this rate nobody can get an order , would help a lot of users. ( we would ofc pay for them…)
Caleb -Love your designs BUT what advice do you have for someone like myself that could use this setup but I need to use my Arca Swiss quick release plate to remove the camera quickly and add it to a gimbal. I dont have time to break this set-up down to add to a gimbal when I'm on the run at shoots. I feel like you need (rig options or sell the parts (cheese plate...etc) separate so we can design our rig to suit our needs
A mode kit for lumix S5II and G9II which have same body will be awesome. And if you will be able to integrate SSD port for cheaper media recording and a way to add LUMIX DMW-XLR1 it will be the dream mod for those camera!
09:26 - It seems like the Tilta Cooling Fan cannot be installed on the Sony a7S III camera. I bought it thinking it would fit all a7 series cameras, but it is too big and cannot be attached near the monitor.
The Ulanzi cooling fan you recommended also can't be installed properly on the a7S III because the USB-C cable cannot be connected due to interference with the cineback frame. Could you suggest a cooling fan that fits the a7S III? If possible, could you also show how it should be installed?
Will cineback also work with the SmallRig "Rhinoceros" Cage 3710 for the a7IV? Its also amazing to see during the whole video of this version of cineback, the XLR module and the FX30 cineback how much thought has been into every detail of the models. Worth every penny!
IF you're reading this, what if you rehouse the xlr handle module to go to the back of the camera? I tried opening it up myself but not a pro in 3d printing and engineering but found out all the internal components have a size that are actually able to fit in the back without blocking any buttons. by flipping the screen out it could reveal the xlr controllers and xlr on the other side.
Complicated and completely unnecessary. The XLR connectors would still be up top and by rehousing it into the cineback, you'd wind up with useless knobs and switches on handle. 👎🏽
I'm new to rigging out camera's and i could really use some help. I have the FX30, Sony ECM-B1M shotgun mic and the Sigma 18-50mm. I want to add a monitor and a battery and i have no clue how to do it. Any other recommended accesoires for my setup are also welcome. If its possible i would like to keeo it budget friendly
@camerafoundry great product! The problem I'm having though is with the xlr handle extension kit, the camera now sits about a half inch in front of the fan. Is there an adapter I could use to get the fan closer to the camera?
Hey! Great product. Just a question, does that XLR Handle work with the A7 series? I thought only the XLR-K3M handle was compatible? If this one works, this is a MUST cop!
Tilta fan for Sony A6700 does not work on cineback with Sony A7Siii. I’ve been trying to get it to work and have had no luck. It doesn’t let me slide the camera back enough for me to align the screws that mount cineback to the cage. Anyone having the same issue please help me out!
Thank you all for kind words and feedback! We are working hard on getting production up to speed and hope to have more consistent stock each week starting end of May 2024. You can subscribe to stock updates on the product page by clicking the "Notify When Available" button.
Literally sold out within minutes it’s ridiculous honestly other companies are starting to make there own versions
Finally got my order in today cant wait
When would be avaliable again? It's always sold out..
Great video, thanks for sharing!
Always a huge fan of this product ! Please do it fast for Lumix S5II/ S5II X
LUMIX s5ii next please!!!!
Yes please 🎉
I need that ASAP
Yes!!!
Yes please 🙏
S5 series please!
We need cineback for the S5II and X please ! And to be compatible with tilta half cage, just a consideration Caleb ! Great great work as always !
love the tilta half cage
I got mine all set up today! It's killer! Something to note for those installing though:
- Before bolting in the CineBack to the SmallRig cage, I would test installing the bolts into the cage and tighten them. Then bolt the cage and CineBack together. It helps prevent the threads in the cage from stripping, as I noticed a lot of resistance when trying to bolt the cage to the CineBack and it wanted to strip.
- I'd avoid trying to tighten any bolts going into the 3D printed material, further than they are now. It could potentially strip the threads in the plastic.
Thank you
Excellent development Caleb! 😎 can't wait to be available
S5iix!!! Let's gooooo
So… its sold out. Will you make the print files avaliable? At this rate nobody can get an order , would help a lot of users. ( we would ofc pay for them…)
just buy the rigidpro which is always available no preorder nonsense
or aliexpress Fusionrig, 120usd
Caleb -Love your designs BUT what advice do you have for someone like myself that could use this setup but I need to use my Arca Swiss quick release plate to remove the camera quickly and add it to a gimbal. I dont have time to break this set-up down to add to a gimbal when I'm on the run at shoots. I feel like you need (rig options or sell the parts (cheese plate...etc) separate so we can design our rig to suit our needs
Could it be installed on a Sony a7iii?
How come the tilta fan doesn’t work with the A7S3? Pretty sure the A74 and A7S are about the same size
Was the early bird price priced higher vs. when the FX3 one came out? I don’t recall the FX3 one being in the 300’s
When available again? Pls take my money
A mode kit for lumix S5II and G9II which have same body will be awesome. And if you will be able to integrate SSD port for cheaper media recording and a way to add LUMIX DMW-XLR1 it will be the dream mod for those camera!
Can anyone confirm if it's for sure it doesn't work for the A7iii? I know the A7riii was mentioned, just want to be sure!
Please make one for the C70 with V Mount battery plate 🙈😅
That camera is actually a cinema camera but have a wierd shape
Usb-c output along with the d-tap outputs would be sick!
+++++
This version of the cineback is amazing and genius , Great development. Can't wait to see what you come up with next!!!
Genius! Just brilliant! S5iix please!! ❤❤❤
Can you make this available for A7iii ?
I know the screen is not a flip out but…. If I’m using an Atmos Ninja V….??
This is what I’ve been wondering as well
LUMIX S5 NEXT BABYYYY!!!! Dope stuff, Caleb 🚀
i think it would be a good idea to make the d-taps flippable by opening up the cineback. idk how much stuff is in there, but it would be cool!
Hi!!
Have question about cine lens, if you going to buy one, witch one you choose, 7artisans or dulesn?
09:26 - It seems like the Tilta Cooling Fan cannot be installed on the Sony a7S III camera. I bought it thinking it would fit all a7 series cameras, but it is too big and cannot be attached near the monitor.
The Tilta Cooling Fan has a width of 77mm, while the monitor size of the a7S III is 74mm. This 3mm difference prevents it from fitting properly.
The Ulanzi cooling fan you recommended also can't be installed properly on the a7S III because the USB-C cable cannot be connected due to interference with the cineback frame. Could you suggest a cooling fan that fits the a7S III? If possible, could you also show how it should be installed?
Alternatively, if you could recommend a cooling fan that fits the a7S III, that would be great :)
Can i use my existing smallrig 3667 cage instead of buying the new 3667B?
Can i get one for the Lumix s5 iix?
Will cineback also work with the SmallRig "Rhinoceros" Cage 3710 for the a7IV? Its also amazing to see during the whole video of this version of cineback, the XLR module and the FX30 cineback how much thought has been into every detail of the models. Worth every penny!
I wish this would work with the FX3 top handle. I use the smallrig cage that lets you use it.
There’s a big community of OG BMPCC enthusiasts that would love this comeback for that camera. Would be amazing.
I need this for the Sony ZV-E1, Fujifilm XH2, and the Nikon Z8. I use all three of these on various projects.
rigidpro already has the zv-e1 version. looks the same.
IF you're reading this, what if you rehouse the xlr handle module to go to the back of the camera? I tried opening it up myself but not a pro in 3d printing and engineering but found out all the internal components have a size that are actually able to fit in the back without blocking any buttons. by flipping the screen out it could reveal the xlr controllers and xlr on the other side.
Complicated and completely unnecessary. The XLR connectors would still be up top and by rehousing it into the cineback, you'd wind up with useless knobs and switches on handle. 👎🏽
Are the Tilta fan modules compatible with the a7iv then?
When’s it going to be back in stock?
Why the warning? Would it matter if the contacts have different polarity if we switch the cable to face the other way? What would it do?
When will the fx3 version be back in stock???
Where'd you get that fan unit from? Can't find it anywhere on the site. Cheers.
Where's SDI converter on this CINE back?
I so need get in a pre-order! Subscribed to the Camerafoundry newsletter and IG... fingers crossed 🤞
When does the first batch ship out?
I’m dying over here I saw this video and almost broke my finger checking the link to see if they are in stock for the a7s3 😢
I'm new to rigging out camera's and i could really use some help. I have the FX30, Sony ECM-B1M shotgun mic and the Sigma 18-50mm. I want to add a monitor and a battery and i have no clue how to do it. Any other recommended accesoires for my setup are also welcome. If its possible i would like to keeo it budget friendly
What screwdriver is most suitable for this job?
Will this fit a Sony a7i or a7sii? You wouldn't be able to use the camera screen obviously. But outside of that would everything function correctly?
Will this also work for the A7c?
what if i buy this for my A7sii ?
Would it fit with tilta cage ?
can u make it more compatible with a7c ii and a7cr?
I need this for the R5C
So cool! Any information about restock?
Would love to see a cineback for pixys 6k
@camerafoundry great product! The problem I'm having though is with the xlr handle extension kit, the camera now sits about a half inch in front of the fan. Is there an adapter I could use to get the fan closer to the camera?
Im assuming a a7c cage would not work with this or could?
Hey! Great product. Just a question, does that XLR Handle work with the A7 series? I thought only the XLR-K3M handle was compatible?
If this one works, this is a MUST cop!
Great piece, great idea. Will you be designing one for the ZV E1?
Nice, when does the S5IIX version drop?
Any chance for a cineback for the canon c70 in the future?
Anything for the Sony A7iii?
Will this work with the a9iii?
Does anything work the the sony a7c the first version?
R6 mk ii cage coming?
i'd love to see custom cut cables of the right lenght for dummy battery considering the distance is measurable
Compatability question! would this work with the small rig half cage 3639 for a7IV? or only the listed cages in the video?
assunming it works with the V2 of the ulanzi fan too?
Is the plates metal or carbon fiber?
This looks so awesome!
Will it work with the rhinoceros smallrig cage?
Great video and concept! Is there one of these for the Sony fx3?
Very well thought design! Any news on the r5c version?
Tilta fan for Sony A6700 does not work on cineback with Sony A7Siii. I’ve been trying to get it to work and have had no luck. It doesn’t let me slide the camera back enough for me to align the screws that mount cineback to the cage. Anyone having the same issue please help me out!
H2S! H2S! H2S! ❤
Yes please!!!!!!!!!!!!!!!!!
FUJI! FUJI! ASAP! ASAP!
second that! xh2s please! great work so far, @Camera Foundry!
Need one for Lumix
what is that lens
also where did you get that red-orange battery Caleb?
It's from GDU Global Dynamics United, to my knowledge they make accessories for RED cameras
@@Drone443 you are da man. Thank you!!
Please Caleb work on the LUMIX S5IIX please! I only use LUMIX so that would be nice
So what does this cineback do ?
I just checked the page and it was sold out already. I subscribed for a stock notification. I got the fx3 and I love it.
Lumix S5IIX PLEEEEEEASE
im noticing that it is mostly 3D printed and it costs $400. Will there be a 3D model that you would be selling so that we can do our own assembly?
Why would he do that when he can gouge people for this?
Excellent product demonstration. Very well done!
would love to buy one but sadly its never in stock
this is why rigidpro is hot hot hot on socials. they've always got stock
I would also adress you need to change the Viewfinder sensor off before doing all this...
Cant wait for it to be in stock to buy one!
Saw you got a rig for the a 6700 coming up. Hurry and take my money
Look these cinebacks! It’d be hilarious to see if it fits on the 3594 cage haha
What’s the point of uploading a video about a product if it’s never available. 😏
Google RigidPRO before this gets deleted :)
I will 3d Print one myself
I really want one of these for canon r cameras
Fantastic. Really looking forward to the ZVE-1 too. Wait....Cine-back 'everything'!!
screw waiting. got the zv-e1 from the "other" brand already.
@marcr4349 Well, all the best with that. I personally am v happy to wait for a Cineback for the quality.
S5iix please!!!
Please make one for R5C :)
Hey Caleb, great job, thank you!)
Lumix? 🙏🏻
Canon R6 mkii next? 😃
LUMIX S5IIX please!!!
already available if you know where to look ;)
@@marcr4349 so where? Is a secret?
It would be great to see this for my Canon r6mii…
Looks awesome Caleb.
Fujifilm XH2s, please bro, for the culture lol! You’ll only need to make a few units then can move onto panicsonic!
This also would be nice to have for the OG Panasonic S5 :)
Annnd it’s gone. Restock plans?
i need this for the canon r6ii!!!
Still waiting on that R5/R5C model hahaha
looks very cool Caleb
Well packed Cage, but the solution with the power supply and cables is not the best..