E30: RC Car Lighting Kit Review, PART 2- G.T. Power SMART LED System
ฝัง
- เผยแพร่เมื่อ 25 พ.ค. 2024
- Thank you for watching my video!
Please visit my Shapeways Page below:
Shapeways: www.shapeways.com/shops/ampro
Please, visit my sites:
Facebook: / amproengineering
Instagram: / amproengineering
Many of my designs and threads can be located at
www.tamiyaclub.com/forum/index...
If you enjoy the music featured on my videos, please visit Blue Pinto’s official site here:
/ bluepinto
www.reverbnation.com/bluepinto
I always enjoy constructive criticism and would love to know what you think about my designs.
Please subscribe as I have hundreds of other upgrades for many, many other cars, rc cars, toys, and anything else that I think needs upgrading!
**I have no tolerance for disrespectful posts, foul language, cyber-bullying, sexism, homophobia, racism and anything else that has no place in society. This is a family friendly channel so I have soap next to me for every time I say a bad word. Any foul or abusive post will be removed and you will be reported to TH-cam.** - ภาพยนตร์และแอนิเมชัน
Good over view again. I follow your conclusions. Any light unit should have as a minimum an option of 2 front lights and 2 tail lights on full brightness all the time, working brake lights, blinking turn lights. Then all the rest should be xtra. Looking forward to the Tamiya light review and seeing the RF/Hornet III solutions.
Thank you. I find it odd how these were programmed. You would think people know how real cars operate and would emulate that. I should have the front end for the RF in soon!
Im glad I found this video- apparently this device is as crappy as it seems. The lights make even less sense for me- my Castle ESC only works with my FlySky radio in reverse and this device doesn't allow for reversing the signal. I'm managing to use it but I have flashing headlights, I only have brakelights- no taillites, and I have blue ground fx that only come on when neutral. I'm gonna 3d print a brake light housing, swap the blue LEDs for red ones and add a resistor, and use them as dim taillights in the same housing as the brighter brakes. I hope this helps anyone, I'm just typing my plan here so I don't forget, lol
Thats a good idea. This really is junk unfortunately.
Works better then mine. For me they all stay on
It stopped working shortly after.
Hi, So which one of these that you tried. You would recommend? Did you try AX-003?.
I have tried all the ones in my review videos but can you give me some more info on this AX-003?
@@AMPROEngineeringWell, I don't have very much info on it now. You can google it. I already purchased one, will see how it works and comeback to you
I have looking on TH-cam for lighting a gas rc but could not find any. need help
That would be no different than an electric one. You still need to draw power from the receiver so there is no difference.
So this one does NOT have "parking"/marker lights ?
No, none of these inexpensive ones do. I think only the higher end TLU-01 and 02 have them when they are combined. You can also find them on the really high end units for the big rigs. They need to be wired in separately.
The gt power kits I am finding claims to have 4 modes. You don't mention that. Did you miss something? Or are the kits available now different?
Edit: the different modes do mention flashing. So maybe the acceleration flashing light can be set to stay on instead of flash?
Is that a vintage Tamiya lighting unit?
Honestly I don't even think it is a Tamiya.
can they be connected to any RC car?
So long as they have a separate receiver. Some new kits combine the receiver and speed control. In those cases, you are out of luck. Also, do not buy this one, it is one of the worst i have reviewed.
Just found the instructions to this kit.
www.jperkins.com/parts/GTP0025
Oh that's helpful! Thank you!
I have no idea why they call it smart, it's simply stupid. Nothing is working as it should
almost nothing
Oh yeah it is bad.
Nope, it's garbage.
Yes it is