Instead of routing the individual outputs to 110, 111, 112, etc. you can route the whole Maschine plugin to a mixer track (as you would do it with any other plugin) and then in the processing tab you can set the so called mixer track offset to 0, 1, 2, 3, etc. For example, if the Maschine plugin is routed to channel 20, then automatically all individual tracks are routed to 20, 21, 22, 23, ... Just wanted to mention that, if you didn’t know about that. Might be a little bit easier/faster setting it up that way :P
I love that this way it's possible to shift all of your track links in bulk by just changing the main mixer track as I change my template mixer routing on an at least weekly basis haha 😄 Thank you for the comment!
Thanks so much for this. This was really helpful. I'm so used to FL Studio and the workflow but I also love my Maschine and now I can use them together exactly how I want thanks to your suggestions.
This is dope, I’ve been on maschine for about 5 years, Perfect concept maker especially with samples, but sucks with arranging by it not being linear well FL was my very first daw it tbh it’s prob the best daw out start to finish this workflow is godly if you want to use both 🙌🏾
Hey thank you for the comment, I also really love maschine even though I'm a long term FL producer, right now I'm working on a script that will transfer most of the maschine functionality directly into FL Studio without the need for a vst to be loaded since a lot of people don't want to bother with this workflow. Should be done in a month or so, I will post the result on this channel. 💻🎛🪄
CLUTCH! i'm a maschine user who is about to buy fl21. needed this cause fl is a powerful daw but maschine just has a more tactile workflow that i want to maintain.
Did some exploring and you don't have to choose between only being able to export audio and having audio mapped to your faders in FL. Instead of changing your sounds audio destination to an external destination, you can send an Aux to the external destination post fader. That way you can get the best of both worlds, Audio and midi still exports and you can still mix in FL as well.
HUGEEEEE PROPS for this video!!! I have had a mikro for years and was about to get rid of it because I didn't know how to integrate well...it's my own fault for not learning it, but there are soooooo many terrible tutorials out there. They are either too long or don't truly address workflow stuff like this. I learned so many clunky ways to do things over the years...like I would use Export Audio to transfer ideas from Maschine to FL and it was so clunky...I had no idea you could drag and drop!!!! THANK YOU!!!! Make more!
I definitely appreciate the video I've been desperately trying to find someone to explain if you can record vocals through machine inside of FL studio.
I appreciate your comment 😊 I suppose you mean physically through the input on maschine mk3? In that case you would need to set your sound card in FL Studio settings to maschine mk3 and you would record vocals like with any other sound card.
@@aftalyfe thank you I appreciate your response, I will locate the Sound card in FL studio and give it a shot. I have been using the focusrite interface it works okay except for I have latency issues really bad. I was hoping that using the hardware would give me better results in terms of buffering.
Hey great tutorial. I was hoping you can help me out. How can I control vst plugins loaded in my channel rack or one shots with mk3? I want to use the mk3 as a midi controller to controll all the sounds or plugins in fl studio. For example I want to load keys cape in FL and use the chord option on mk3 to record directly into my my vst midi channel.
First off thank you for making this video Question… at the end are you basically saying I can use it the the image line midi pain… because I thought I could doin it at one point years ago but I just got one and idk wtf is going on 🤣🤣🤣🤣
Yes! As long as the host transport control is active in controller editor, you can close it and the controller will remember. Keep in mind that you might still need to assign the play midi message to play the project. I made a script that lets you do that and more, you can watch the last video on my channel for more info!
Hey man! learned a bunch from your video thanks :))) one question though, in the controller editor i enabled that host control thing. but when i press play, FL gives me the midi icon with the question mark, meaning it just doesnt know what midi message is being sent... how do i get it to play and stop?
My bad, forgot to mention that if you separate drum files for mixing purposes, you would have to go into keyboard mode while having a certain sound selected and then drag and drop from there. That's going to export just one element. Another way to do this is to solo the sound you want exported and then drag and drop. Unfortunately I haven't found a way to batch drag and drop. However, there is a way to batch export a group (check my other video in the cards on this subject for that).
Thanks man! I'm using fl studio for a long time and I was interested by mashine because of his groovebox but I don't understand why is so difficult to integrate this mashine in my work flow, I have the impression that the both can't work together, I don't want to have to open mashine all the time, I mean.. All this little waste of time. I saw your last video about your script, this is dope its wat h I was looking for, it's a great work but do you think one day the both will be work completely perfectly together? the norm NKS and native instrument still growing and with all this new things I cant imagine that it still so difficult. I just want to create a beat(with mashine) , put in in my template fl studio, add othersong or whatever, and then record voices or a guitare, and do all this thing whitout think about "what daw I'm using, I have to put this pattern mashine in fl.." sorry my English is bad but you understand me? I feel alone 😂😂 thanks for this video
I'm discovering your channel today is like a big forum where a lot of people have the same bad experience with fl and mashine 🤣 I have an other question if you have the time to respond Like I told you I bought the mk3 with also the keyboard komplete control of NI, but not the one with the screen. I don't know if u use it but I'm answering myself how is the best way to do working the 3 (fl, mashine, keyboard) because with my mashine I can navigate into my instruments and play it directly with my piano and it's cool but is that the only interest? Good night! A friend from France
Do I have a great deal with mashine if i only want to step up with my production in FL studio? Or it's time to start from the beginning and buy a new daw more adapted with mashine Oh sorry man I have so much question 😂 I was just enjoying a lot in fl and I was thinking that adding mashine at my worflow could be better but it 's not that for the moment 😭😂
does anyone knows if you can bounce/export indiviudal pads? like say i have kick (1) snare (2) hi hat closed (3) open hi hat (4) can i bounce them seperately? so each one has a wave form or would it all just be in the group as one sound?
Yes you can! Fastest way would be to mute any that you dont want and then drag out the ones you do. Or if you want to do it in bulk go to export and check that you want to export all sounds, it will give you a folder with all individual loops.
Haven't actually tried it as I didn't install fl studio as a vst but I suppose it could be done by opening fl studio vst inside maschine. Not sure how that could be useful though.
@@aftalyfe it would be useful if one would prefer to get the both of best worlds by using these two apps according to liking or according to how their preferred workflow 🤷🏽♂️ 😂 it would have been great but it doesn’t work
![How to Use Clips in Maschine [My Top 16 Tips]](/img/n.gif)
Instead of routing the individual outputs to 110, 111, 112, etc. you can route the whole Maschine plugin to a mixer track (as you would do it with any other plugin) and then in the processing tab you can set the so called mixer track offset to 0, 1, 2, 3, etc.
For example, if the Maschine plugin is routed to channel 20, then automatically all individual tracks are routed to 20, 21, 22, 23, ...
Just wanted to mention that, if you didn’t know about that.
Might be a little bit easier/faster setting it up that way :P
I love that this way it's possible to shift all of your track links in bulk by just changing the main mixer track as I change my template mixer routing on an at least weekly basis haha 😄 Thank you for the comment!
So route Maschine to a channel and the pads will automatically route to the 16 after? Thanks for that tip!
@@stevet3733 yes, just set the mixer track offset in the processing tab from 0 to up 15 in your case and you‘re done 😁
The 1st intuitive video on this topic. 🙏🏾Thanks
Thank you for watching! 😊
Videos like this are so appreciated - answering questions i didnt even know i had. Thank you!!
Same goes for feedback on them, thank you!
Thanks so much for this. This was really helpful. I'm so used to FL Studio and the workflow but I also love my Maschine and now I can use them together exactly how I want thanks to your suggestions.
This is dope, I’ve been on maschine for about 5 years, Perfect concept maker especially with samples, but sucks with arranging by it not being linear well FL was my very first daw it tbh it’s prob the best daw out start to finish this workflow is godly if you want to use both 🙌🏾
Hey thank you for the comment, I also really love maschine even though I'm a long term FL producer, right now I'm working on a script that will transfer most of the maschine functionality directly into FL Studio without the need for a vst to be loaded since a lot of people don't want to bother with this workflow. Should be done in a month or so, I will post the result on this channel. 💻🎛🪄
Total fucking legend
I figured out the easiest way with no midi routing. 3 minutes
th-cam.com/video/fN3EOGrDUXw/w-d-xo.htmlsi=ofi4UjrnjncwlXjE
CLUTCH! i'm a maschine user who is about to buy fl21. needed this cause fl is a powerful daw but maschine just has a more tactile workflow that i want to maintain.
Did some exploring and you don't have to choose between only being able to export audio and having audio mapped to your faders in FL.
Instead of changing your sounds audio destination to an external destination, you can send an Aux to the external destination post fader.
That way you can get the best of both worlds, Audio and midi still exports and you can still mix in FL as well.
HUGEEEEE PROPS for this video!!! I have had a mikro for years and was about to get rid of it because I didn't know how to integrate well...it's my own fault for not learning it, but there are soooooo many terrible tutorials out there. They are either too long or don't truly address workflow stuff like this.
I learned so many clunky ways to do things over the years...like I would use Export Audio to transfer ideas from Maschine to FL and it was so clunky...I had no idea you could drag and drop!!!! THANK YOU!!!! Make more!
Thank you for watching!
Man you should have way more likes, this was really useful. Thanks!
Thank you for watching!
I definitely appreciate the video I've been desperately trying to find someone to explain if you can record vocals through machine inside of FL studio.
I appreciate your comment 😊 I suppose you mean physically through the input on maschine mk3? In that case you would need to set your sound card in FL Studio settings to maschine mk3 and you would record vocals like with any other sound card.
@@aftalyfe thank you I appreciate your response, I will locate the Sound card in FL studio and give it a shot. I have been using the focusrite interface it works okay except for I have latency issues really bad. I was hoping that using the hardware would give me better results in terms of buffering.
this dude has it figured out! thanks
This was a GEM 💎💎
Thank you ❤
TY for this video and here’s your subs as well 🔥, I just got my Maschine Mikro‼️‼️
Thank you for this video.
Hey great tutorial. I was hoping you can help me out. How can I control vst plugins loaded in my channel rack or one shots with mk3? I want to use the mk3 as a midi controller to controll all the sounds or plugins in fl studio. For example I want to load keys cape in FL and use the chord option on mk3 to record directly into my my vst midi channel.
i wish you had gotten an answer to your question because i have the exact same question.
First off thank you for making this video
Question… at the end are you basically saying I can use it the the image line midi pain… because I thought I could doin it at one point years ago but I just got one and idk wtf is going on 🤣🤣🤣🤣
Is this the process of setting up your maschine inside of fl studio or is it steps I need to do before all this ?
is there a way to use the play/pause function without the controller editor open in the background?
Yes! As long as the host transport control is active in controller editor, you can close it and the controller will remember. Keep in mind that you might still need to assign the play midi message to play the project. I made a script that lets you do that and more, you can watch the last video on my channel for more info!
What about Akai Fire/Maschine controller? What is your opinion on using both in workflow?
I would always enable loop mode before drag and drop a wave file
Hey man! learned a bunch from your video thanks :)))
one question though, in the controller editor i enabled that host control thing. but when i press play, FL gives me the midi icon with the question mark, meaning it just doesnt know what midi message is being sent...
how do i get it to play and stop?
I’m using maschine studio as a plug-in in fl studio but is not recording midi inside maschine so I can drag in drop into fl playlist
gamechanger
instant like and subscribe thanks you
Thank you for watching!
how do you mix your drums if you export them as an audio into FL
My bad, forgot to mention that if you separate drum files for mixing purposes, you would have to go into keyboard mode while having a certain sound selected and then drag and drop from there. That's going to export just one element.
Another way to do this is to solo the sound you want exported and then drag and drop. Unfortunately I haven't found a way to batch drag and drop.
However, there is a way to batch export a group (check my other video in the cards on this subject for that).
for some reason my maschine is labeled under master when used as a plug in and my tempo/ time line wont sync up. any help?
Why is my sample not playing with the maschine now hooked up wtf 😫
thank you
Thank you for watching!
Thanks man! I'm using fl studio for a long time and I was interested by mashine because of his groovebox but I don't understand why is so difficult to integrate this mashine in my work flow, I have the impression that the both can't work together, I don't want to have to open mashine all the time, I mean.. All this little waste of time. I saw your last video about your script, this is dope its wat h I was looking for, it's a great work but do you think one day the both will be work completely perfectly together? the norm NKS and native instrument still growing and with all this new things I cant imagine that it still so difficult. I just want to create a beat(with mashine) , put in in my template fl studio, add othersong or whatever, and then record voices or a guitare, and do all this thing whitout think about "what daw I'm using, I have to put this pattern mashine in fl.." sorry my English is bad but you understand me? I feel alone 😂😂 thanks for this video
I'm discovering your channel today is like a big forum where a lot of people have the same bad experience with fl and mashine 🤣 I have an other question if you have the time to respond
Like I told you I bought the mk3 with also the keyboard komplete control of NI, but not the one with the screen. I don't know if u use it but I'm answering myself how is the best way to do working the 3 (fl, mashine, keyboard) because with my mashine I can navigate into my instruments and play it directly with my piano and it's cool but is that the only interest?
Good night! A friend from France
Do I have a great deal with mashine if i only want to step up with my production in FL studio? Or it's time to start from the beginning and buy a new daw more adapted with mashine
Oh sorry man I have so much question 😂 I was just enjoying a lot in fl and I was thinking that adding mashine at my worflow could be better but it 's not that for the moment 😭😂
I figured out the easiest way with no midi routing. 3 minutes
th-cam.com/video/fN3EOGrDUXw/w-d-xo.htmlsi=ofi4UjrnjncwlXjE
Hi..if I use the drag n drop.. does it drag any mascine processing to FL .. I quite like the transient in maschine on kicks? Thanks
it would have the processing, but it would be recorded on the wav
WHERES THE LINK???
does anyone knows if you can bounce/export indiviudal pads? like say i have kick (1) snare (2) hi hat closed (3) open hi hat (4) can i bounce them seperately? so each one has a wave form or would it all just be in the group as one sound?
Yes you can! Fastest way would be to mute any that you dont want and then drag out the ones you do. Or if you want to do it in bulk go to export and check that you want to export all sounds, it will give you a folder with all individual loops.
@@aftalyfe bro thank you! I took a break from FL to learn maschine and the combo of both is soo fun! Thanks for the help and info!
How do u have maschine setup how a plugin in FL?
There are videos that show you how to install vst plugins in fl. By installing maschine software you should also have it as a vst.
Can you link the two daws in reverse order? Lets say I want Maschine to be the master and FL Studio the slave.
Haven't actually tried it as I didn't install fl studio as a vst but I suppose it could be done by opening fl studio vst inside maschine. Not sure how that could be useful though.
@@aftalyfe it would be useful if one would prefer to get the both of best worlds by using these two apps according to liking or according to how their preferred workflow 🤷🏽♂️ 😂 it would have been great but it doesn’t work
Subtitles in spanish plz
I bought Maschine Mk3 and I have been endlessly disappointed on how much it sucks with other software like why does it have to be used as a crappy VST
Hunh ?
When you purchase something and realize you have no idea wtf u purchased ... I’ll be selling this shit, back in the box I go.
Hi, when i tap record, i can't record anything. I use maschine mikro mk3. How can i fix it?
I figured out the easiest way with no midi routing. 3 minutes
th-cam.com/video/fN3EOGrDUXw/w-d-xo.htmlsi=ofi4UjrnjncwlXjE
Hit play