I mulch with those Gator 3 Blades, they do well. At sharpen and balance time, a little oil along the edge you grind down will prevent rust and assure you have a keen edge when you mow in the spring. The bent up tips really thrash the clippings up a good bit.
The G5 blades are tungsten carbide infused, as are the G6 blades....the G6 blades are wider than the G5 and G3. The G3 blades are more of an entry "Gator" blade, light duty basically for smaller mowers with less HP. I have the G5 blades on my Cub Cadet XT1 42" lawn tractor, they do great, and after 4 seasons mowing an acre every week I finally took them off and sharpened them. The OEM blades that were on the lawn tractor lasted a couple seasons and are still usable, but went to the G5's for better mulching capability.
I have gator blades on my XT1 cub cadet lawn mower tractor & I Love them !! No problem with them & they will last longer then the regular blades !! Thanks for the video & take care & happy mowing Lol
I'm going to wait until my spindles go before I get new blades and I'll probably get the gator 5... Of course we know the spindles and blades last about the same time .. I have the new s style spindles Witcher over $100 a piece.. so you know I'll put the star spindles in place of them and my blades will not be $90... If I would have known about the spindle.. I would have bought a Husqvarna...
I have had them on my cub cadet since 2016 and coated my underside of my deck with slip plate graphite to keep grass from sticking to it . I just bought a new cub cadet 4 inch and first thing underside of deck got a coat of slip plate and new gator blades . I have over 3 acres to mow I am amazed at how many people put their blades on upside down . I have 282 hours on my 2016 and have hd problems with spindles and learned on her why sealed bearings were not getting in grease into them and bearings went dry . My spindles had grease zerk fittings and looked plenty of grease in the spindles but none was getting into the sealed bearings and Ifixit4U on youtube said take off inside seal so I am trying that because this is 3 rd set of spindles on the 2016 first set under warranty after only 20 hours . So figured that may work I kept the ol spindles and rebuilt them with new bearings inside seal removed
@@jackofalltrades7822 I had that problem also and found out with the help of youtube that the grease that I put into the zerk fittings was not getting into the sealed bearins and this is after 3 failed spindles . Ifixtit4U explains it on you tube . i redid the spindles bought new bearings and took the inside seal off the bearings that face each other and put it back together . But now height is mess up on my mower deck and trying to figure that out By the way glad i saved the sspindles and looked at them because it was the same in all of them . No grease got into the sealed bearings and there was no greased left in them . It runs great now but now deck is an issue . drive belt deck belt and rebuilt spindles with greased bearings
If you're going through so many spindles, it could be because the blades are not well balanced. Use a high quality blade balancer. (Not a nail or cone type).
I got the Oregon Gator g3 blades like this for my cub cadet xt1 46 inch deck mower and it mows pretty good. Unfortunately it does slightly ding the deck upon engaging the PTO as I can hear the metal hitting metal, also if it’s a bump it will hit. Unsure why.
The biggest thing to me is how much dirt and dust they lift and cut is secondary Dry areas need just standard blade period in most yards unless you water and fertilize them heavily
I have a question pertaining to the gator blades, I've been having some issues with grass accumulating on the deck, I have mobility issues so it's hard for me to clean the deck, would the gator blades help discharge the clipping for efficiently? Thanks
I have noticed that deck build up seems reduced but not eliminated. I can’t say if it is the blade design or just because they were new. I run the deck washer after each mowing build us has never been a problem for me.
I have the Gator Blades and also have grass clipping build up on the deck. I use my blower when I’m done and it cleans it up really nice. It’s much easier to do with the Gator Blades because the clippings are much smaller and easier to blow out. Also I noticed right away with the Gator blades that they pull up residual clippings from the old blades Took a couple of cuttings but I noticed the grass is greener and the clippings dissipate much quicker. Good blades
You purchased G3 gator blades. They are reasonable but do not have enough lift, do not have a long life cutting edge, etc. I have G3 blades on my 1863 cub cadet. They are fine for the money. I've read and read that gator g5 blades are much better than G3s. I'd like to get oregon hi lift blades with the long life cutting edge. It would indeed be nice to have some g5 blades as well. Unfortunately the g3 do not eject the grass as well as they need to and really coat the deck in a thick paper mache of grass.
I mulch with those Gator 3 Blades, they do well. At sharpen and balance time, a little oil along the edge you grind down will prevent rust and assure you have a keen edge when you mow in the spring. The bent up tips really thrash the clippings up a good bit.
Thanks for watching.
The G5 blades are tungsten carbide infused, as are the G6 blades....the G6 blades are wider than the G5 and G3. The G3 blades are more of an entry "Gator" blade, light duty basically for smaller mowers with less HP.
I have the G5 blades on my Cub Cadet XT1 42" lawn tractor, they do great, and after 4 seasons mowing an acre every week I finally took them off and sharpened them. The OEM blades that were on the lawn tractor lasted a couple seasons and are still usable, but went to the G5's for better mulching capability.
@@wildbill23c thanks for watching.
I have the g5 gator blades made by oregon & they are the best !!!!
I have gator blades on my XT1 cub cadet lawn mower tractor & I Love them !! No problem with them & they will last longer then the regular blades !! Thanks for the video & take care & happy mowing Lol
You are lucky your engine was not destroyed, lucky you.
Your videos are great keep up the good job. More grease to your elbow and more wisdom always.
Those blades been very easy on the Cub cadet... I'm surprised it didn't total the whole lawn mower
I'm going to wait until my spindles go before I get new blades and I'll probably get the gator 5... Of course we know the spindles and blades last about the same time .. I have the new s style spindles Witcher over $100 a piece.. so you know I'll put the star spindles in place of them and my blades will not be $90... If I would have known about the spindle.. I would have bought a Husqvarna...
mine are on the way. im so impressed how far its throws' the grass!
Great attention to detail Sir.
I have had them on my cub cadet since 2016 and coated my underside of my deck with slip plate graphite to keep grass from sticking to it . I just bought a new cub cadet 4 inch and first thing underside of deck got a coat of slip plate and new gator blades . I have over 3 acres to mow I am amazed at how many people put their blades on upside down . I have 282 hours on my 2016 and have hd problems with spindles and learned on her why sealed bearings were not getting in grease into them and bearings went dry . My spindles had grease zerk fittings and looked plenty of grease in the spindles but none was getting into the sealed bearings and Ifixit4U on youtube said take off inside seal so I am trying that because this is 3 rd set of spindles on the 2016 first set under warranty after only 20 hours . So figured that may work I kept the ol spindles and rebuilt them with new bearings inside seal removed
46 inch cub cadet not 4 oh well
Great comments. I never thought of slicking up the deck.
Let me ask you a question. Is the upper or lower bearing failing on the spindles?
@@jackofalltrades7822 I had that problem also and found out with the help of youtube that the grease that I put into the zerk fittings was not getting into the sealed bearins and this is after 3 failed spindles . Ifixtit4U explains it on you tube . i redid the spindles bought new bearings and took the inside seal off the bearings that face each other and put it back together . But now height is mess up on my mower deck and trying to figure that out By the way glad i saved the sspindles and looked at them because it was the same in all of them . No grease got into the sealed bearings and there was no greased left in them . It runs great now but now deck is an issue . drive belt deck belt and rebuilt spindles with greased bearings
If you're going through so many spindles, it could be because the blades are not well balanced. Use a high quality blade balancer. (Not a nail or cone type).
@@sptrader6316 I did but they still did it until I got gator blades and it hasn't happened since
Oregon blades are a definite improvement. Nice camera drop! Ouch!!
I got the Oregon Gator g3 blades like this for my cub cadet xt1 46 inch deck mower and it mows pretty good. Unfortunately it does slightly ding the deck upon engaging the PTO as I can hear the metal hitting metal, also if it’s a bump it will hit. Unsure why.
Some blades been very easy and I don’t buy the thin blades anymore
Really decent lookin cut. I've got the crappy 2 in 1 blades,but g5 gatorblades are on my to buy list.
The biggest thing to me is how much dirt and dust they lift and cut is secondary
Dry areas need just standard blade period in most yards unless you water and fertilize them heavily
Next time add the old high lift with the gator blade in a cross style and you will see way better results.
Thanks for watching.
Blades are not supposed to be razer sharp. Edge of blade should be 1/64 flat on edge. It will last longer and give a better cut. PS nice britt.
Any issues with not having the two little screw holes that the originals had? My mower is the same way.
Nope. There is only one nut holding on the blades.
I have a question pertaining to the gator blades, I've been having some issues with grass accumulating on the deck, I have mobility issues so it's hard for me to clean the deck, would the gator blades help discharge the clipping for efficiently? Thanks
I have noticed that deck build up seems reduced but not eliminated. I can’t say if it is the blade design or just because they were new. I run the deck washer after each mowing build us has never been a problem for me.
I have the Gator Blades and also have grass clipping build up on the deck. I use my blower when I’m done and it cleans it up really nice. It’s much easier to do with the Gator Blades because the clippings are much smaller and easier to blow out.
Also I noticed right away with the Gator blades that they pull up residual clippings from the old blades
Took a couple of cuttings but I noticed the grass is greener and the clippings dissipate much quicker.
Good blades
I use only G5s on my Cub Cadet RZT54SX Zero Turn.
How are the blades holding out ????
Do they make G5 and G6 for all cub cadet 6 star hole
Will the g5 fit on my craftsman m140 mower
I believe they make a blade for most any machine
@@jackofalltrades7822 I will try Lowes or HD to see if the have any
So I see that is a push mower. I think the G5 is mainly for riders.
@@jackofalltrades7822 that would suck! I was hoping I could upgrade from the OEM craftsman blade
You purchased G3 gator blades. They are reasonable but do not have enough lift, do not have a long life cutting edge, etc.
I have G3 blades on my 1863 cub cadet. They are fine for the money. I've read and read that gator g5 blades are much better than G3s.
I'd like to get oregon hi lift blades with the long life cutting edge. It would indeed be nice to have some g5 blades as well. Unfortunately the g3 do not eject the grass as well as they need to and really coat the deck in a thick paper mache of grass.