Thank you for your videos. I’ve done a lot of fab’ing over the years for different mechanical companies but I was clueless when it came to ratios/ clutch’s/ etc. I’m having fun w a small Coleman I’m putting a 212 in the place of a 99cc. I’ve built the 99 as far as I can. No mod parts for the 99 At 119$ (212)cheaper to just replace it ! I appreciate all the info in your videos. I’m subscribed and telling people to check you out! ✌️
I finally got to see your face 😀. I’m glad your being less camera shy.Just remember your a smart guy and you know things a lot of people don’t know.Wow so many mini bike frames.
I see you got the same blue grips I got.I had to put gorilla glue on the inside of the throttle side of the grip because it kept slipping out.That’s a really strong bike.
Rather than the carbide for opening the bearing holes, try a flap sander. It'll give finer control and you'd be less likely to accidentally get out of round grinding. Also, you should really swap which sides the brake levers are on.
Install zerk fittings so u could grease ur driven pulley bearings with a grease gun.. I had a tote gote with zerk fittings on everything wheels,head, & the driven pulley was on the pivot point for the rear swing arm. Full suspension 8 hp L head The coolest minibike ive ever had my hands on.
Yes, but only forever in every video and never taken off. You never know when you're going to spontaneously jump on a fast camel and run through the woods!
I heard he looks like Thor's not so distant but underdeveloped doppelganger, the roids had a bad effect early on and produced accelerated super acne. He has since sworn he will never reveal himself to the outside world and committed to wearing a helmet to hide his grossly deformed identity....it's also been rumored he is an alligator person.
well, Tillotson doesn't put out a 440cc that will be putting out over 22HP and just under 30 ft lbs of torque with only minor mods... so I don't know if there's a good comparison on this one. ;)
Predator, available locally with 13hp only at harbor freight, 18+ ft lbs torque, cost $399 sometimes has coupon for less has electric start. Duromax $379 with electric start but $339 without and available from tractor supply, Lowes, and Amazon with free shipping to home giving it decent return ability. Rated at 18hp and 26+ ft lbs of torque it's in a league of it's own. Uses many of the same Honda clone 390 aftermarket parts.
@@megoingfast thanks for the tips, never knew that just have seen a lot of hype around tillotson. I am assuming this takes an40 series tc and does a juggernaut fit on this or what would you recommend?
@@TheBiliken 40, but hoping the 44 fits as well with design for more power. Parts just cost so much to test them all. Juggernaut is 3/4" driver and shaft is 1" unless there's a new juggernaut for 1" I haven't seen?
Controversial. I'd like to do more when I I have a much higher sub count, but when your sub count is lower and a higher sub count channel does it "differently" all you get is grief. I was planning to do a little detail in the next video of the build series though. Needed a part, might be able to throw some info in.
Dude that's so sick! Awesome videos and job on building it 👍🏼. Look forward to more cool videos
Now that's a homemade mini bike with style! Thanks for the build plans!
AWESOME CUSTOM MINI BIKE! Crazy homemade build!
The frame looks like Murray track 2. Awesome build I love it
Thanks! I was absolutely going for a cross of the Track 2 and the Motovox, with enough room to hold a big block!
I have an murray track 2 the best minibike forever
You living life buddy. A lot of hard work. Awesome foot work . I’m mind blown 🤯.
Can't wait to see that thing rip with the 440 🤙
Absolutely stunning job.
Thank you for your videos. I’ve done a lot of fab’ing over the years for different mechanical companies but I was clueless when it came to ratios/ clutch’s/ etc. I’m having fun w a small Coleman I’m putting a 212 in the place of a 99cc. I’ve built the 99 as far as I can. No mod parts for the 99
At 119$ (212)cheaper to just replace it !
I appreciate all the info in your videos.
I’m subscribed and telling people to check you out!
✌️
Nice mini bike.You always do excellent work.I like how you cut all those cool parts.
I finally got to see your face 😀. I’m glad your being less camera shy.Just remember your a smart guy and you know things a lot of people don’t know.Wow so many mini bike frames.
I see you got the same blue grips I got.I had to put gorilla glue on the inside of the throttle side of the grip because it kept slipping out.That’s a really strong bike.
Great content as always the reason I’m into minis keep the videos coming
Ya buddy to freakin cool
Rather than the carbide for opening the bearing holes, try a flap sander. It'll give finer control and you'd be less likely to accidentally get out of round grinding. Also, you should really swap which sides the brake levers are on.
Install zerk fittings so u could grease ur driven pulley bearings with a grease gun.. I had a
tote gote with zerk fittings on everything wheels,head, & the driven pulley was on the pivot point for the rear swing arm.
Full suspension 8 hp L head The coolest minibike ive ever had my hands on.
Thank you!
Hello real nice video hay could you do a build with rear suspension I am wanting to build a mini bike and your info is a big help keep it up thanks.
Hey ! awesome videos! Wondering where you got your seat from?
He really wore that helmet the whole time
Yes, but only forever in every video and never taken off. You never know when you're going to spontaneously jump on a fast camel and run through the woods!
@@megoingfast psssh happens all the time.....I really like the Hemi-Non-Hemi camel the best 🙄.
I heard he looks like Thor's not so distant but underdeveloped doppelganger, the roids had a bad effect early on and produced accelerated super acne. He has since sworn he will never reveal himself to the outside world and committed to wearing a helmet to hide his grossly deformed identity....it's also been rumored he is an alligator person.
Bink…..he always does!
Man how you learned so much about this 🤔 you really know your trade & how long you been doing this 🤔
I want to scale all this up to an adult size, no longer mini bike. Where can I get the tires?
Just make a multi detent lockable footrest swingarm. Slim profile that will allow the foot rests to change position
Good 👍
working on building rn
Everyone else- The rascal is here!
Me going fast- Hold my root beer
lol I do like my root beer!
I don't have a rascal either.....😒
🤜👍
Awesome build! How do you like the duromax vs tillotson? Was thinking tillotson 225?
well, Tillotson doesn't put out a 440cc that will be putting out over 22HP and just under 30 ft lbs of torque with only minor mods... so I don't know if there's a good comparison on this one. ;)
@@megoingfast What about the Predator 420 for comparison?
Predator, available locally with 13hp only at harbor freight, 18+ ft lbs torque, cost $399 sometimes has coupon for less has electric start. Duromax $379 with electric start but $339 without and available from tractor supply, Lowes, and Amazon with free shipping to home giving it decent return ability. Rated at 18hp and 26+ ft lbs of torque it's in a league of it's own. Uses many of the same Honda clone 390 aftermarket parts.
@@megoingfast thanks for the tips, never knew that just have seen a lot of hype around tillotson. I am assuming this takes an40 series tc and does a juggernaut fit on this or what would you recommend?
@@TheBiliken 40, but hoping the 44 fits as well with design for more power. Parts just cost so much to test them all. Juggernaut is 3/4" driver and shaft is 1" unless there's a new juggernaut for 1" I haven't seen?
link isnt working ow can i get plans
Can you please do a install vid on the 9000 rpm predator 212
Controversial. I'd like to do more when I I have a much higher sub count, but when your sub count is lower and a higher sub count channel does it "differently" all you get is grief. I was planning to do a little detail in the next video of the build series though. Needed a part, might be able to throw some info in.
How much do you charge
Do you sell these frames?
Do an electric one and you might get more interest....
👍
all these tools and benders but no WORK BENCH how come !!!!!
Wtf is the FBI looking for u or something 🤔
Nice work. Your helmet is annoying. Sorry.
Because of type of that comments he is wearing a helmet