I've been dwindling off watching electronics on TH-cam because 90% of the content is watered down, they skip over the in-depth build process, the challenges and solutions along the way, like you said, the iterative process. This video is the perfect mix between technical depth, the journey of problem solving, awesome factor, and entertainment. By far the best DIY electronics video I have came across in a very long time. Top work Cam!!
Thank you for the kind words! It is a very tricky content area to navigate all the factors you mentioned. So I'm glad to hear you've enjoyed my style 😄
Yes, I spent some time this morning at least getting cables off the floor. But I want to unplug everything now that the tech is in and make clean runs to ensure minimal interference for audio cables. Haha yeah the corflute needs a long edge for the front. I'm thinking of getting a 2.2meter piece of metal that can act as a straight edge and screw over the bottom front, making it all seamless. Always more to explore and refine!
This project has been so fun to watch. I don't have a clue what you're doing 90% of the time but in a world of problems you are a solutions person and I love it. Well done.
This series has been so helpful/inspirational. I built a new desk late last year and have been customizing it over time and have incorporated some of your ideas (though not to the same extent!) so thank you so much for putting this out there
Amazing stuff. This series gave me huge motivation and inspiration for my next custom setup. I didn't even know I wanted a different setup from what I have now, yet here we are. Thanks for the ideas
AMAZING! There is nothing like building custom items for a desk for the specific tech you use. Great video and short enough so as not to bore the viewers. You are truly gifted!
MAAAAAATTTEEEEEE!!!!! So bloody stoked to see this all come together! Got those chills with you. Good luck w/ the cable management, with the amount of tech you're cramming in it's worth looking into some form of cable labelling. My desk is a dual display PC and Macbook setup run through a HDMI/USB switch (via thunderbolt dock) and the takeaways from a tonne of cable management iterations over the years due to component failures and moves would be; - Draw and maintain a labelled wiring diagram, both intended design and "as built" once done. - Label each cable at Source, Output and mid-run. Especially important if you end up using more than one plane (X/Y/Z) - So you can hotswap cables ideally have each managed seperately. If not, then manage groups applying "seperation of concerns" - In an ideal world I'd find a way to use "junctions" to seperate "zones" and run appropriate length cables between. The idea being that if I wanted to swap my monitor cable I just have to swap the cable from [[ Monitor Desktop Junction ]] rather than having to remove the entire cable run back to the PC. This would have been invaluable when the DisplayPorts on my GPU went and I had to swap to the HDMI and USB C outputs. - To minimise wear and tear from bumps and day-to-day vibrations on ports/connections, fix and secure as close to the port as practical. Love your stuff man and pumped for what else you dream up.
Man those chills are like nothing else 🤩 Awesome tips, thank you! I for sure should add some labels, at least to the lighting and speakers which have specific sides. A diagram is a good idea, I've done it in the past on my previous cable management video a few years ago as it just got confusing even sorting out powerboard loads. Great idea with a junction box,, even running a switcher for my monitor would be handy as oh how I hate trying to reach behind it! Looking forward to sharing the custom PC build with you next 😁🤙
It's been really great to read the comments of inspiration, far more than I could imagine really connected with the concept! Custom PC will be very unique, but to go from ideas in my head to real world, much like the desk, can be quite the process haha.
Bravo!! You really captured how it is to fit existing tech into a re-purpose or different enclosure. Back in the days before 3D printing I did a lot of this type of thing and have gained a lot of experience over the years, not always successful, but that's the incentive to improve (I bricked an $800 VST player once!) With that knowledge, I would say you did very well!
Duuuuuuude yes!! It is looking so amazing! I am so stoked for you. The physical hacking you are doing is so fun, I love the time and effort and patience you have for these tiny things you have to worry about to make it all seamless. Just brilliant. Cannot wait to see the pc get started! Congrats mate
Adam dude! Thank you for the tip on the sanding. Although my hand tool skills aren't up to scratch like my robot ones haha. I do plan to try etching with the laser cutter on the back side to get a precise depth to fit the PCB 🤙 Custom PC planning and prototyping is now in full effect 💪
This is super cool, and I'm so glad you managed to get everything fitting together and working how you imagined it! And I can't wait for the custom PC...
This desk is absolutely amazing! I would love to see you turn this into a commercial product as I know I'm not the only one that would love to buy one! For now I tried buying the plans off your site so I can play around with it and see if I could make one without the control panel but everytime I try to check out the page won’t load. Anything you could do to help would be greatly appreciated! Thanks for sharing your dream with us and for making such inspirational videos!
Thanks Erich! It really tested my patience haha, the custom lighting more than anything. Very happy with the final product. Looking forward to sharing future projects with you now that you're subscribed 😁👍
This would be my dream project if I owned a laser cutter and had any confidence in soldering. I would love to make a highly customized solution like this. Maybe someday... Never had any formal training with CAD software, but as a graphic designer I have plenty of experience with Illustrator, so I use practically the same method for designing complex 3D printed mounts. I recreate my precise bits in illustrator then import that SVG into TinkerCAD and kit bash everything together.
Yeah, the Stream Deck is basically one large capacitive touch screen, and each button has capacitive rubber on the bottom (the material you find on the tip of those cheap phone styli). The Stream Deck knows which button you pressed based on the area of the screen that was 'touched'. It surprised me when I discovered that too, but in retrospect it makes so much more sense than engineering buttons that each have their own individual displays. It's actually quite genius. It's a pretty simple design that achieves a more complex appearing result.
Yes amazing design idea, and got me thinking about how you could also make custom dashboard displays by simply putting an acrylic or wood faceplate with holes cutout to view a TV behind it. So coool!
Very nice! And also as a ham radio guy, if the ham radio guys see this they'd love it too. Our radio desks are always screaming for panels and organization. Well done!
The algorithm worked .... searching for custom desks bought me here today. Amazingly, it appears we also live in the same town looking at footage in some of your vids. Keep up the amazing work, pumped for the PC build!
Thanks Alex, yes by the final panel I at least had a few tricks up my sleeve for getting PCB's to mount in unique ways. Now to put those skills into a Custom PC build 👍
Funny thing is I initially wanted to make my own macropad, but after looking into the StreamDeck Plus I realised it did everything I could ever want, and better. Re-Housing it into my desk was the perfect solution
For straighter grinds with the rotary tool, you could use a clamp to hold the tool in place at a right angle to the acrylic and then slide the acrylic against a straight edge so the grinding wheel stays on the path you want (you could even use lengths of your extruded aluminum as the straight edge). That way you eliminate any variance in your movements when grinding the acrylic.
That's a good idea, kind of like a router table, but for the rotary tool. I've since upgraded to a C02 laser at home so was able to do varied depth engraving. I can appreciate people with hands on tool skills, but using a robot is so much easier haha
This series has straight up been one of the most interesting series I've ever watched! Seriously incredible job Cam! Can't wait to see what you do in the future :)
From talking about the idea on the train to IMAX Oppenheimer to reality... The build has come a long way and so has the channel 🤩 excited to see what's coming 🖤
Bro I forgot about that! Yeah I was in the mad scientist planning phase trying to piece everything together. Thanks for your help with everything! And for the makerspace makeover coming in the next video 😜
Yeah my chair has arm rests so it's only my wrists that are at the edge of the desk. Could always make a deeper desk but I found I rarely need more than an A4 page worth 👍
Yo Matt! Thanks for watching man. Yeah the bracket was a pain, but a good lesson in iteration. Just keep trying and eventually each little issue will be solved 🤙
As a fellow Aussie, I am glad I have stumbled across your channel, I have binge watched pretty much all of your recent videos (mainly the desk build) over the last few nights. Subscribed and can’t wait to see what you do next! Keep up the great work mate.
Metal for the PC frame arrived today! I'm excited to put it all together and start prototyping my custom panels. And nice spot, I love my MegaBot, 3D printed and hand painted it's faces
Great work, just stumbled upon the playlist while skipping through yt i wanted to such things myself some time but havent quiet got the idea where to start nice inspiration keep up the pace
Thanks Leon! We all start somewhere, I try to break any project down into small chunks. This Series was a good example of that. Learning the frame and how to drill the mounts. One step at a time 🤙
THIS IS WHAT I CALL A PROPER CUSTOM DESK BUILD. How on earth are you only on 51K subs? Excellent work - and congrats, I reckon you've just made yourself a load of money with people wanting the files for the same build! ;)
that turned out great! now that you have some more experience designing enclosures and brackets, maybe make a bezel for that touch screen in the middle! awesome work dude
hahaha yeah the uneven bezels are quite bizarre! problem I realised with making an overlay would mean the screw mounts are no longer symmetrical to the edges of the screen.... it's a lose lose 😢
"It's not gonna fit" hahaha, the moment you realize you forgot something and now you have to think about another solution, good thing it was a "little" change, 12:29, that was literally me waiting for it, man hahaha, I'm so excited to see what you do next, that custom PC is gonna be awesome I know it for sure.
hahah ohhh my heart couldn't take it much longer. Very happy that each solution didn't take too much reworking. Custom PC is going to be really fun. Just like the desk, I've never done a unique PC case, but I feel I've got most of the skills required now to pull off my idea! 💡
hahaha oh man it took a lot of patience. Pretty sure my wife was tired of hearing about every little detail that wasn't working lol. Happy that's it's now at a stage where I can enjoy it.
Thank you! It's actually codenamed "frost desk" in all my documents haha. As when I started researching and planning the "frosted acrylic" was the key feature.
Fantastic man! I get excited like that too when i build custom stuff. The first power on and it works huh. Every single time is like i expect it won't. Lol
Doesn't always work first try every project haha. I was really expecting to have broken the touchscreen module but pleasantly surprised it works perfectly
10:05 next time you have an issue Like that, you should know, there are These Things called Heat Set Inserts. Basically Just a little brass nut, that you can Melt into your plastic, so that you have a thread within your Part. They are quite cheap and super usefull!
I love the creativity, the dedication and the time spent into making all of this. I love it when people invest into quality of life projects because it always pays off in the end!
your video came up on my recommended this project is insane love what you did with all the other tech, looks very teenage engineering inspired (Swedish house mafia tour console in paticular) subscribed cant wait to see more stuff in the future.
My man got the ADHD Premium Ultra Plus
Yes 😅
fr why not buy the screws :)
ad4k hdr?
"Limited edition"
Same
I've been dwindling off watching electronics on TH-cam because 90% of the content is watered down, they skip over the in-depth build process, the challenges and solutions along the way, like you said, the iterative process. This video is the perfect mix between technical depth, the journey of problem solving, awesome factor, and entertainment. By far the best DIY electronics video I have came across in a very long time. Top work Cam!!
Thank you for the kind words! It is a very tricky content area to navigate all the factors you mentioned. So I'm glad to hear you've enjoyed my style 😄
It's not DIY electronics, it's DIY carpentry + wiring.
This is, hands down, my favorite TH-cam channel right now. Just fantastic.
Was just about to say this! Totally agree
Criminally underrated
This has been such a satisfying build series to watch, looking forward to see what the custom PC is going to be like!!
You know it's gonna be sick
the whole "in my flow everything going great before disaster" hits home waaaay to much. This project is amazing keep it up :)
This has to be singlehandedly one of the coolest desks I've seen.
Gotta agree with you there Eddie 😜 but I may be based haha
Your are right focus on cable management and the foam underside and it will be so cool!
Yes, I spent some time this morning at least getting cables off the floor. But I want to unplug everything now that the tech is in and make clean runs to ensure minimal interference for audio cables.
Haha yeah the corflute needs a long edge for the front. I'm thinking of getting a 2.2meter piece of metal that can act as a straight edge and screw over the bottom front, making it all seamless.
Always more to explore and refine!
@@camshand Dang sound like a plan. I really like this project. Its such a cool look with the frosted plexy.
Keep it up!
Not only did you create a video showcasing this awesome project, but you also provided us with the plans and models for it. Awesome content!
"I'm not a designer but I really like designing things!"
- 3:59 Truely Inspirational😂😂
This project has been so fun to watch. I don't have a clue what you're doing 90% of the time but in a world of problems you are a solutions person and I love it. Well done.
Thanks Nathan! I've enjoyed sharing the process, the ups and the downs. In the end it all comes together 😁
I've seen a lot of desk build videos but nothing like this... next level insane!
Thank you, it was quite the process!
あなたの動画をはじめてみましたが、最高にかっこいいデスクです、まさに究極!!
最高の動画をありがとう!!
Bro, just incredible.
Lining up the standing desk buttons with the screen was a class act.
Man, this is one of the BEST DIY/desk setup video on TH-cam, I can't wait for the next video to drop!!
Appreciate the compliment 🤩 I'm excited to share more soon!
Man, this is so wild. Easily the most creative desk setup on TH-cam (or dare I say...the internet?)
Incredible work you've done here. Nicely done! 👏🏻
Danny! Appreciate it man, I haven't seen anything like it before in a home desk setup so you might be right 😉
This series has been so helpful/inspirational. I built a new desk late last year and have been customizing it over time and have incorporated some of your ideas (though not to the same extent!) so thank you so much for putting this out there
Absolutely breathtaking.
Good job.
I’m inspired.
Amazing stuff. This series gave me huge motivation and inspiration for my next custom setup. I didn't even know I wanted a different setup from what I have now, yet here we are.
Thanks for the ideas
Haha well not sure if I should say sorry or enjoy as I know what the custom desk journey ahead is like! Good luck
AMAZING! There is nothing like building custom items for a desk for the specific tech you use. Great video and short enough so as not to bore the viewers. You are truly gifted!
gotta love that you set up a new project to go into after this one, looking forward to it!
haha always got something planned 😉
MAAAAAATTTEEEEEE!!!!! So bloody stoked to see this all come together! Got those chills with you.
Good luck w/ the cable management, with the amount of tech you're cramming in it's worth looking into some form of cable labelling. My desk is a dual display PC and Macbook setup run through a HDMI/USB switch (via thunderbolt dock) and the takeaways from a tonne of cable management iterations over the years due to component failures and moves would be;
- Draw and maintain a labelled wiring diagram, both intended design and "as built" once done.
- Label each cable at Source, Output and mid-run. Especially important if you end up using more than one plane (X/Y/Z)
- So you can hotswap cables ideally have each managed seperately. If not, then manage groups applying "seperation of concerns"
- In an ideal world I'd find a way to use "junctions" to seperate "zones" and run appropriate length cables between. The idea being that if I wanted to swap my monitor cable I just have to swap the cable from [[ Monitor Desktop Junction ]] rather than having to remove the entire cable run back to the PC. This would have been invaluable when the DisplayPorts on my GPU went and I had to swap to the HDMI and USB C outputs.
- To minimise wear and tear from bumps and day-to-day vibrations on ports/connections, fix and secure as close to the port as practical.
Love your stuff man and pumped for what else you dream up.
Man those chills are like nothing else 🤩
Awesome tips, thank you! I for sure should add some labels, at least to the lighting and speakers which have specific sides.
A diagram is a good idea, I've done it in the past on my previous cable management video a few years ago as it just got confusing even sorting out powerboard loads.
Great idea with a junction box,, even running a switcher for my monitor would be handy as oh how I hate trying to reach behind it!
Looking forward to sharing the custom PC build with you next 😁🤙
This video deserves more views and likes! It is very well put together and your thought process is amazing!
This series has been amazing! Definitely has made so many of us want to design our own dream desk, cannot wait to see how you make a custom PC!
It's been really great to read the comments of inspiration, far more than I could imagine really connected with the concept!
Custom PC will be very unique, but to go from ideas in my head to real world, much like the desk, can be quite the process haha.
I've really been enjoying seeing your whole process. I'd love to do my own custom desk build some time, and what you've done is really inspiring.
Very happy to hear you're inspired to make something yourself! it all starts with an idea 💡
I found your channel about 3 videos into the desk build and have seen each part a few time. Love the great Custom work you're doing. Huge fan!
Thank you for subscribing! Glad you've enjoyed the process as it's unfolded 👍
i can't get over how well-produced your videos are!
I have a dream to build a an entire set up like this
Really freaking cool. Congrats on finishing this beast of a project.
Thanks Max, I'm stoked to finally have no blank panels on the dashboard 🤩
Dude great work and dedication. This is showing your real talent of showing what's in your head
Sick build mate. So glad I found you when I did. We need more people like you on this platform!
Appreciate the kind words Josh! Glad to have people like you subscribed 😁🤙
Bravo!! You really captured how it is to fit existing tech into a re-purpose or different enclosure. Back in the days before 3D printing I did a lot of this type of thing and have gained a lot of experience over the years, not always successful, but that's the incentive to improve (I bricked an $800 VST player once!) With that knowledge, I would say you did very well!
Duuuuuuude yes!! It is looking so amazing! I am so stoked for you. The physical hacking you are doing is so fun, I love the time and effort and patience you have for these tiny things you have to worry about to make it all seamless. Just brilliant. Cannot wait to see the pc get started! Congrats mate
Adam dude! Thank you for the tip on the sanding. Although my hand tool skills aren't up to scratch like my robot ones haha.
I do plan to try etching with the laser cutter on the back side to get a precise depth to fit the PCB 🤙
Custom PC planning and prototyping is now in full effect 💪
This is super cool, and I'm so glad you managed to get everything fitting together and working how you imagined it! And I can't wait for the custom PC...
The Custom PC is going to be very unique! Let's just hope the build process is straightforward haha
@@camshand Yeah lets!!
This desk is absolutely amazing! I would love to see you turn this into a commercial product as I know I'm not the only one that would love to buy one!
For now I tried buying the plans off your site so I can play around with it and see if I could make one without the control panel but everytime I try to check out the page won’t load. Anything you could do to help would be greatly appreciated!
Thanks for sharing your dream with us and for making such inspirational videos!
Brilliant job! I don't think I would have the patience to get this done, but the look is phenomenal. Keep up the work. Subscribed.
Thanks Erich! It really tested my patience haha, the custom lighting more than anything. Very happy with the final product. Looking forward to sharing future projects with you now that you're subscribed 😁👍
I just stumbled upon this while going down the TH-cam rabbit hole and absolutely loved it. That's such a cool and sleek desk build!
This would be my dream project if I owned a laser cutter and had any confidence in soldering. I would love to make a highly customized solution like this. Maybe someday...
Never had any formal training with CAD software, but as a graphic designer I have plenty of experience with Illustrator, so I use practically the same method for designing complex 3D printed mounts. I recreate my precise bits in illustrator then import that SVG into TinkerCAD and kit bash everything together.
Wow what an effort you put in this vision. I got to say this looks verry good and all the hard work paid out at the end. Well done !
Thank you, it was quite the journey but I'm very happy I stuck with it to see it through 😁
Yeah, the Stream Deck is basically one large capacitive touch screen, and each button has capacitive rubber on the bottom (the material you find on the tip of those cheap phone styli). The Stream Deck knows which button you pressed based on the area of the screen that was 'touched'.
It surprised me when I discovered that too, but in retrospect it makes so much more sense than engineering buttons that each have their own individual displays.
It's actually quite genius. It's a pretty simple design that achieves a more complex appearing result.
Yes amazing design idea, and got me thinking about how you could also make custom dashboard displays by simply putting an acrylic or wood faceplate with holes cutout to view a TV behind it. So coool!
Very nice! And also as a ham radio guy, if the ham radio guys see this they'd love it too. Our radio desks are always screaming for panels and organization. Well done!
If only I could justify building something like this. Awesome build!
The algorithm worked .... searching for custom desks bought me here today. Amazingly, it appears we also live in the same town looking at footage in some of your vids. Keep up the amazing work, pumped for the PC build!
That's awesome it's coming up in search 🤩
And well my e-scooter vid very much highlights I'm a fellow bendigonian 🤙l
3D printing is such a joy to watch
cam I feel like you’ve gotten better at the test iterate test cycle. This last panel had a bunch of complexity but you solved it all!!
Thanks Alex, yes by the final panel I at least had a few tricks up my sleeve for getting PCB's to mount in unique ways. Now to put those skills into a Custom PC build 👍
This turned out very nice! Please give us an update with better cable management and the final tweaks you made once you're done!
ok...that is hands down the most impressive custom desk build i have EVER seen
It's been an inspiring project to follow along with. Congrats on the build and looking forward to the next project!
Thanks man! Love your vids 🤙 keen to share the custom PC build, hoping all the measurements will line up haha 😆
that is actually a great video! you didn't try to reinvent the wheel, just make it look the way you wanted!! thank you for sharing that!!
Funny thing is I initially wanted to make my own macropad, but after looking into the StreamDeck Plus I realised it did everything I could ever want, and better. Re-Housing it into my desk was the perfect solution
@camshand also the most simple one... you didn't need to code anything with the functions you wanted!
This is awesome!!! Wow i m folloowing this project since the begining and i have to say that this is the best setup I have seen
Thank you for following the journey! I really appreciate your support.
Excited to share future project with you 😁
@@camshand Thank you!! I cant wait for it!!
For straighter grinds with the rotary tool, you could use a clamp to hold the tool in place at a right angle to the acrylic and then slide the acrylic against a straight edge so the grinding wheel stays on the path you want (you could even use lengths of your extruded aluminum as the straight edge). That way you eliminate any variance in your movements when grinding the acrylic.
That's a good idea, kind of like a router table, but for the rotary tool.
I've since upgraded to a C02 laser at home so was able to do varied depth engraving.
I can appreciate people with hands on tool skills, but using a robot is so much easier haha
That's really impressive craftsmanship and creativity. Keep up the good work.
Loved the entire process. Killed it.
I really enjoyed watching this process... Great work!
This series has straight up been one of the most interesting series I've ever watched! Seriously incredible job Cam! Can't wait to see what you do in the future :)
From talking about the idea on the train to IMAX Oppenheimer to reality... The build has come a long way and so has the channel 🤩 excited to see what's coming 🖤
Bro I forgot about that! Yeah I was in the mad scientist planning phase trying to piece everything together. Thanks for your help with everything! And for the makerspace makeover coming in the next video 😜
This looks so amazing!
I could never use this as i rest my arms on my desk, but this looks amazing!
Yeah my chair has arm rests so it's only my wrists that are at the edge of the desk.
Could always make a deeper desk but I found I rarely need more than an A4 page worth 👍
dude took what I was thinking and made it into reality :0 awesome glad i found this channel
This was so much fun to watch! My brain started hurting when you went into the brackets lol. Crazy good job man!
Yo Matt! Thanks for watching man. Yeah the bracket was a pain, but a good lesson in iteration. Just keep trying and eventually each little issue will be solved 🤙
As a fellow Aussie, I am glad I have stumbled across your channel, I have binge watched pretty much all of your recent videos (mainly the desk build) over the last few nights. Subscribed and can’t wait to see what you do next! Keep up the great work mate.
This is amazing my man, congratulations!
It's crazy how 3D printers enable "normal" people to make and engineer anything you like
They're truly incredible machines! Especially with prices coming down and sensors automating the difficult parts. So good 😊
Man you’ve grown so much. Super duper proud!!
I got to build something like this, it´s too good!
this is amazing, just watched the whole build and cant wait to see the custom pc. I love the microbot on the desk
Metal for the PC frame arrived today! I'm excited to put it all together and start prototyping my custom panels.
And nice spot, I love my MegaBot, 3D printed and hand painted it's faces
@@camshand Oooh so exciting, it was one of the first things I spotted being a fan of Big Hero 6 my self.
This is like if someone put all my interests into one video. Youre going to make it man.
Stoked to have you subbed for the journey 🚀
I'm loving these, and has me wanted to try doing this myself!
It all start with an Idea, than make a plan to chip away at! 💪
The fact that this came real I am spechless. Congrats!🎉
Thank you, I'm speechless too, so excited to finally be sitting infront of my dream desk 🤩
You did good bro! looks beautiful 👍👍
Appreciate it man 🙏
Great work, just stumbled upon the playlist while skipping through yt i wanted to such things myself some time but havent quiet got the idea where to start nice inspiration keep up the pace
Thanks Leon! We all start somewhere, I try to break any project down into small chunks. This Series was a good example of that. Learning the frame and how to drill the mounts. One step at a time 🤙
nice job dude, real clean aesthetic
You are a genius!! Love watching your videos!! 💪
Bro the man Ben is in the house! So excited to model up my Custom PC. Appreciate your help with the radiator file 💕
THIS IS WHAT I CALL A PROPER CUSTOM DESK BUILD. How on earth are you only on 51K subs? Excellent work - and congrats, I reckon you've just made yourself a load of money with people wanting the files for the same build! ;)
Man, your videos are SO inspiring, definitely one of the best YT channels!! Keep it up!
Again this desk deserves a dedicated desktop pc frfr 😭 amazing work
Edit: nvm I see you build one in your latest video 🙌🏾
Fair play mate, been a great journey to watch
Thanks for following the journey Chris 😁🤙
that turned out great! now that you have some more experience designing enclosures and brackets, maybe make a bezel for that touch screen in the middle! awesome work dude
hahaha yeah the uneven bezels are quite bizarre! problem I realised with making an overlay would mean the screw mounts are no longer symmetrical to the edges of the screen.... it's a lose lose 😢
@@camshand for sure but i really like the exposed pcb look kind of cyberpunk
Made my freaking day ! Quite the build ! And without the use of expensive tech in general ! You did an amazing job !
"It's not gonna fit" hahaha, the moment you realize you forgot something and now you have to think about another solution, good thing it was a "little" change, 12:29, that was literally me waiting for it, man hahaha, I'm so excited to see what you do next, that custom PC is gonna be awesome I know it for sure.
hahah ohhh my heart couldn't take it much longer. Very happy that each solution didn't take too much reworking.
Custom PC is going to be really fun. Just like the desk, I've never done a unique PC case, but I feel I've got most of the skills required now to pull off my idea! 💡
Love this, so unique to you in so many ways. Much better than the 'custom setups' kinda videos, this has depth ! nice work
Loving this work man!!! Great stuff! And I wish I had your level of patience haha
hahaha oh man it took a lot of patience. Pretty sure my wife was tired of hearing about every little detail that wasn't working lol. Happy that's it's now at a stage where I can enjoy it.
This really was a great project!
that frozen look on the desk is beatiful
Thank you! It's actually codenamed "frost desk" in all my documents haha. As when I started researching and planning the "frosted acrylic" was the key feature.
Bro never disappoints
Fantastic man! I get excited like that too when i build custom stuff. The first power on and it works huh. Every single time is like i expect it won't. Lol
Doesn't always work first try every project haha. I was really expecting to have broken the touchscreen module but pleasantly surprised it works perfectly
so amazing dude, you're rocking🤯
your setup is soooo unique i love it!
Subbed, Champion! We need to have more Aussie maker channels!
Thanks Gus! ☺️
This was incredible to watch!
10:05 next time you have an issue Like that, you should know, there are These Things called Heat Set Inserts. Basically Just a little brass nut, that you can Melt into your plastic, so that you have a thread within your Part. They are quite cheap and super usefull!
work hard and achieve everything . Motivated by you . Thank you
That is a lot of work for a desk but boy was it satisfying to watch it come together.
what a beautifull set up. I hope one day i can build one like that
i really recommend using 3m light defusing film on the entire desk. it would clean everything up and look incredible.
I love the creativity, the dedication and the time spent into making all of this. I love it when people invest into quality of life projects because it always pays off in the end!
Hands down the best custom table I’ve ever seen in me entire life…
your video came up on my recommended this project is insane love what you did with all the other tech, looks very teenage engineering inspired (Swedish house mafia tour console in paticular) subscribed cant wait to see more stuff in the future.
that project is what i dream of, almost, a ship like design.
goodjob m8
This looks so awesome!!! You are the type of person I want to be like. Also you ARE a designer
Amazing job man!! It's impressive and your desk look f* awesome!!! 🤯🤯🤯
That’s sooooooooooo cool 🤩🤩🔥🔥
Really enjoyed this entire collection of videos. Congratulations on your desk setup! You're a fantastic creator!!