Radiomaster TX16s Mk.II: Overview of the what has changed on the newly released update
ฝัง
- เผยแพร่เมื่อ 9 เม.ย. 2022
- www.radiomasterrc.com/collect...
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingiverse.com/painless360
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/painless360.
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#radiomaster #TX16s #review
![☀ Крутая аппаратура, у которой нет аналогов? Ожидание vs реальность. [Radiomaster TX16S]](http://i.ytimg.com/vi/3ie3pJHb-60/mqdefault.jpg)
![☀ Крутая аппаратура, у которой нет аналогов? Ожидание vs реальность. [Radiomaster TX16S]](/img/tr.png)
Thanks for the new review! Have a nice day!
Great update - I was considering purchasing a used TX-16 first gen and this cleared up the differences. FYI, there are a few 3D printed shoulder switch replacements and folding handles hat you may like. Printables has a few and Thingverse does as well.
Awesome review, Lee! Thanks! 😃
Stay safe there with your family! 🖖😊
I'm going to purchase the Ag01 gimbals after watching your video's. You have been extremely helpful to me and im sure many others. Thank you
Great job Lee! I still have my Horus x10s which I use for those planes with matching RX. My main driver is the RM tx16s/ CRSF. I am porting over to ExpressLRS with both very soon.
honest review as always I'm happy with the version one, I don't use the shoulder sliders anyway and the gimbals are fine for my slow sedate flying lol. Stay safe Lee
Great job man very Concise.👊❤️
Thank you so much for this review. It gave me the confidence I needed to move from my 12 year old DX8 to the Radiomaster. Anxiously sitting by the gate awaiting it's arrival here in South Africa.😳 Been wanting to give up my spektrum due to the 4+Chanel Rx's now costing over a R1000.00(ea.)
Thanks for the real review. Your grades are real. Just like each of us has an impression when using it.
BTW. When I read some of the comments, I am reminded of my first radio that still had mechanical trimmers. And the receiver had to be tuned every few months. that I will not mention the over-meter antenna for 27 MHz and the need to replace the quartz for a specific radio channel ...
Now people can complaining because the LED is blinking 3x and not 4x. Really???
Even the best radio on the world will not make us better pilots. Maybe that's why I'm still pretty mach resistant to all these "important improvements".
"Give me the door with the motor attached, and I'll fly too." This is my motto;)
I wish they released this version with already installed internal BT . I guess still have to wait for new features in ELRS,to use telemetry app. Thanks for sharing!
Adding bluetooth is a 10 min job and natively supported. There is even pads on the pcb to solder the chip on
I like the form factor of the TX16S - For compact and travelling I use the TX12 (waiting for the TX12 upgraded gimbals to release)
I would have liked to see the momentary switch on the left as it really helps if its used for instant trim. I have done it on my version 1 but it does requires some unsoldering and soldering to swap SF with SH
Great vid bud. Ive got the v1 and will be sticking to it as ELRS doesn't really appeal to me. There are so many protocols out there it's buyers choice, which is nice for a change! Crossfire is my main and probably always will be for some time to come.
yeah - there are some other cool protocols, but crossfire just works for me
Honest review,
As you mentioned I would like them to make a little more transmitter
Small in size, in my opinion the tx16s is too big and the tx12 is too small something between tx12 and tx16s in size would be nice.
I love my cheap FLYSKY FS-i6X, never let me down and does all i want/need.
Me too.
Add me to that list!
I have both and I love the Flysky for a beginner radio, it's particularly good for small hands (especially kids), and supports all the basics. It's what I buy or recommend for people new to the hobby who aren't made of money. The TX16S is a far more advanced radio though and can do way more things. It leaves the Flysky in the dust in this regard. I do wish it was a bit less bulky though. If Radiomaster would put the full 4-1 capability in the TX12 it would be a real winner, killing the Flysky for all practical purposes.
I'm having a bit of a headache using it with my 800mm fms Corsair. Particularly with the reflex v2 gyro system. I tried connecting it with ppm configuration. All the servo worked except for the throttle. In the end I just used pwm the issue is now I can't turn off the gyro. I'm stuck playing between optimal mode and stabilized mode. It's still fun tho
Flysky i6x mix capability is terrible.
Wow, I have two, ordered the second when charger problems occurred. I like the complexity ...keeps the brain cells alive. Something to do during covid ... I dont think I'll upgrade, these should last me a lifetime, given my age . A shout out to Radiomaster, they sent me the parts to fix the first one . Easy repair except that little 4 wire ribbon cable , hard on old fingers and eyes. I tried edge ts, but the relearning was .. well the replacement board came with open TX and that was it . Thanks for the review, seems there are many new options being offered by American vendors , all based I guess on model 1, moving that old stock out? Take care.
I'm a newbie only have a RTF Ranger 1220. Looking to get an advanced radio and start buying BNF or PNP planes. Is this the transmitter for me? Hate to get a NX8 and be stuck to spectrum recievers only. Thanks sir
Yes, get a Radiomaster, you won't regret it.....I'll never go back to being stuck to a single brand/protocol receiver.
Picked the tx16 mk2 with the AG01s and multi protocol. Will just be in the sims for some time but plan to add the 1w 2.4ghz ELRS module when it comes time to build a drone. Keen to get stuck in to FPV
Thenks
I fly a Tbs mambo but the large color screen in a real attraction. Orange is my fave color also they would hook me instantly with that.
I wish updates stopped happening and what I have now will always be the best. LOL
I also feel like edge TX has nothing that I use other than it's touch screen fairly use that.
Totally agree with wanting a more compact version with the same quality. A TX16mini, or a TX12max-plus. Take the TX12 and upgrade the gimbals, screen, grips etc... and that would be close.
And full 4-1 capability.
Radiomaster Boxer is here ;)
I've been eyeing this radio since v1, particularly the red and black max edition with the cnc gimbals. Currently am flying with a qx7-s without no real problems except for when I do firmware upgrades.
How do the stock batteries compare vs the 5000mah option to the one on the qx7?
Do you think it's upgrade time?
5:10 the MkII rotary controls do fit on the RadioMaster TX16 I’ve upgrade mine! It has a much better feel to it
That black radio is the cheapest on the Radiomaster site. It appears that if you buy the models with the coloured cnc components you will get the folding handle.
I wonder whether the new pots with better centre idents will be available as spare parts to upgrade V1 models.
I would expect so... will just be a spare part, and I don't think anything changed re: electrical connection or mouldings
The battery door isn't any easier to access if you run the full sized CRSF on the back. They should have put that release tab on the bottom of the cover.
I second the commenter regarding Bluetooth. For the price of a £3 BT module not including it in a premium radio is very annoying. Hopefully telemetry mirror is added to eLRS soon though, leaving only headtrackers needing the Bluetooth module.
Hello, it's been another year since the TX16S MkII has been with us. I'm planning to buy it, but I'm hesitant to wait for its successor. The question is if there will be one and when.
Any blue tooth or wifi for head tracking?
Great review, as always! There is one item in which I do not quite agree with you: size. I bought myself a TX12 believing I would enjoy the smaller dimensions. Made a relatively long one-hour flight with my slope soarer, and felt uncomfortable because I had to angle my hands more than with the wider TX16S. Perhaps it is just me...
Radios are a very personal thing. There is no 'one size fits all'. It is the same with goggles and lots of things in the hobby. We already have a huge radio in the TX16s and a game style in the Zorro so there is a gap in the line-up that many pilots are looking for. See the other comments for other pilots who want a more compact version. No wrong answer on this one but more choice is a good thing..
@@Painless360 Agree!!!
hi! i have v1, it's possible to build a colours set of spare parts of v2 on v1??? the form factor it's the same also in this set of components? thanks
Hello, I am having an issue with my radio master mk2 set up, I cant seem to find a radio set up video for it regarding any of the kopilot products, just videos involving inav or betaflight. I have a zohd 250g dart and I can bind it get everything working properly but the stabilization I cant seem to figure out how to set the three modes to one or any switch. It worked fine on my flysky transmitter but that broke so I upgraded to the radiomaster. Any tips or tricks would be appreciated!
Seee my videos on Kopilot setup. Nothing special with this radio for the setup... Best of luck
I wonder if you can help was at RC club Sunday and were having problem with the throttle trim using mode 2 when in lowest idle throttle trim only works up none down but if i put stick in centre position i can trim up and down.
I've not seen that. What software and version?
great effort....congratulations.I want to ask something. What is the bluetooth status on this remote? In the old version, it could be used by adding it with a module. I think they canceled the module location in the new version. How can a solution be found?
Module hopefully. If I get my hands on one I'll share how to set it up!
Nice vid, I updated mine to Edge TX but the touch screen didn't work , I have two speakers in my unit but my jog wheels is plastic. Do I have the SE model ?
All of the TX16s units have a touch screen so I'd suspect that one of the cables isn't seated properly... Best of luck!
So, you can run spectrum receivers and all sorts of other stuff on these? I just don’t want to be stuck to one bran when spectrum is so expensive with receivers.
Yes, with a multiprotocol module. See the link to see the supported protocols... Happy flying
Excellent excellent review Lee, lovely radio and yes pity they don’t have orange CNC hopefully soon🙏
I made the mistake of purchasing a Jumper T18pro V2 and within 6 months, the right gimbal began to loose calibration. All my quads wanted to roll right and pitch down. I have recalibrated several times and it only lasts for a couple of uses and goes out again. I can find no replacement gimbals from Jumper. Everyone is out so I am switching to the TX16S.
It would’ve been good if there was wireless communication for head tracking.
Hoping the sliders drop right into the old version. It's the only thing I hate about my TX16s. I used to use the sliders for flaps on gliders, the first gen sliders are so floppy and worthless that I just put them on a switch.
Does it have bluetooth module?
Hi Lee,
Great review and much appreciated. 👍
New to RC Flying and looking to buy ELRS version of this Radio and after some training have a Spitfire that I'm getting ready with FPV for kicks.
Have seen your other videos on Head-tracking setups and these are absolutely brilliant!
Q? are you aware of any ELRS receivers that have enough channels to support Fixed Wing Requirements W/Landing Gear & HT?
Best regards from Australia.
Hold on, ELRS 3.0 is almost out and may be better for this... Stay tuned!
@@Painless360 Thanks for the reply Lee!!
@@Painless360 Lee - 1 other question which was unclear for a total newbie like me,
Does the new ELRS version run on ELRS ontop with the 4-in-1 system still onboard?
or
Is it only 100% ELRS and there is no 4-in-1 telemetry involved?
Thanks again
I'd been out of the hobby for some time and just looking at new equipment. This TX looks super nice. I've got an old Deviation TX I hacked and soldered, never really trusted it much. Faith in own soldering? Meh. Baked in 4in1 is nice.
Lots of content aimed at the new (and returning) pilot. Let me know if you have any questions.. Best of luck
Would a second GPS system hooked to one of the lower UART's make iNAV return to home function smoother? If not, would this possibly be a way to improve signal of a flight controller?
I don't think so... It would just allow you to have thinks like GPS co-ords of the transmitter on screen, and be able to show distance and direction between craft and transmitter if the transmitter is moving (i.e. on a boat) or moving towards last transmitted co-ordinates if it crashed...
@@pfeerick that may be handy for filming or finding a crash!
Hi, just purchased a tx16 mk2 with edge, can you please tell me how to set up a V tail glider on edge or where I can find more info on how to do a V tail set up, thanks in advance, windcheetah
The mixing is the same as on OpenTX. You mix the rudder and elevator into the Vtail control surfaces. See my Opentx video in it.. Best of luck
Can the orignal tx16s from aprox 2 years ago work with frsky access receivers such as R8 Pro or will only the tx16s v2 only communicate with them. If so I think frsky have really shafted the users, hopefully not.
ACCESS wasn't supported last time I checked. See th-cam.com/video/DfKyx0yTbXU/w-d-xo.html
Hi.
I like your channel as you explain everything in simple terms but I am having trouble with my radiomaster TX16S mk2. I was using Jumper T16 with open tx and thought I would go over to edge to so bought the latest TX16S but for some reason I cannot bind it to any Rx.
I am trying to bind to Frsky RX8R pro.I set internal module, Frsky D16 protocol, press bind, hold down button on rx and connect battery. The red led comes on so does the green and the chirping stops on the tx. Restart both and the rx led is slowly flashing red meaning signal lost. I have tired to bind a Turing year rx and a jumper rx and none will bind. Am I missing something.
Paul.
Has this reviever bound to the original radio?
@@Painless360 Hi.
Problem solved. I had to select FRsky-X and EU LBT protocol on Tx and then it binded ok.
Hi guys, i wanna see the drone's camera via my computer. Do you know how can i do this with this controller
There are videos on other channels showing the options for analogue and digital FPV... It's not something I do here... Happy flying
Which version of Radiomaster Tx16s mk2 do you recommend?
Which versions are you interested in?
Sir , you mentioned this model ( i also have this Mark 11 model ) shipped with a SD card and the files installed ..... mine didn't . Can you give me a link as to where to get these files. I went to github and downloaded what i thought were the right( and latest ) but all the files were readme files FOR the files ...... very frustrated in Louisville , KY .
They are on the RadioMaster website. Best of luck
Question: Can you set these up with the DJI Avata or anything other DJI drones?
I've not tried but as DJI are a proprietary vendor who want customers to only use thier stuff, if it is possible then modification would almost certainly be needed.. happy flying!
Any changes or improvement to the trainer port? I've never found it reliable...
Yes, I'll make a FAQ video with these questions to cover in more depth..
ELRS or Crossfire ? Are the both analog ? Which is more capable for distance ?
Depends if you need more than 4 full resolution channel and SBUS output on the receiver along with other things (Smartport output etc.). If you do then ELRS isn't for you (at the moment). ELRS is great for quads and flight controllers but nor great for other stuff like fixed wing
Would like to know how to get it to read engine temp and RPM. I can not fine a thing about it.
www.flyingtech.co.uk/electronics/frsky-smart-port-telemetry-rpm-temperature-sensors#:~:text=The%20FrSky%20Smart%20Port%20RPM,20%20to%20250%20degrees%20 Celsius. With a Smartport Frsky RX?
Does the new MkII have a replacable antenna mount?
No, still permanently attached. But there had been accessory part for a while now for removable antenna ;)
Is there a big difference between the v4 HAL gimbal and the CNC ones?? Is it worth getting the CNC gimbal over the V4? Thanks 😊
Will i be able to get the new pots and sliders for my first gen. Max ?
Just to note: the TS16S MkII spares fit will in the original TX16S, others have done it.
I just bought one and the volume even when turned to 100 percent is hard to hear compared to my older Tx16s. Have you heard about this?
I've not seen that here, I'd let the seller know... Best of luck
Although I do watch your tubes quite a lot of it is over my head, where should I go to get a beginners guide? As a ps you did teach me to fly a helicopter though now I just do drones
Lots of my content is designed for new pilots. Check out the playlists. Any called 'Introduction to....' or '.... for beginners' will show how to use that piece of RC. I.e. th-cam.com/video/xPDc6r6nRTU/w-d-xo.html
Why do TX manufacturers normally place the screen below the gimbals? Placements like on the Frisky X20 or Rasiomaster Zorro seem so much better.
You mentioned the jurisdictional nature of the RF certification, and that got me to thinking... Did anything change for you with Brexit with either flying regulations or radio systems? I'm in the US but I'm always curious about the direction that UAS regulation is going in the future here and worldwide.
They still fall under LBT and 868mhz like the rest of Europe. Although half the ppl here fly with FCC though it is pretty necessary to fly 868mhz because of the cell signals. Not legally allowed to turn 868mhz up over 10mw but... yeah...
If you do a follow up video any plans for reviewing the Max model version?
I will if I get one in but the 'feel' of the radio is very similar to this one.
@@Painless360 thanks, I now realise the max is the same radio with the upgraded CNC coloured parts and some models available with AG01 gimbals although the radio functions between the two are identical. Thanks again
Hello there Lee, good video above.
William down in South Africa here.
Looking for some help if possible.
My TX16s Version 1 has suddenly started putting in some positive and negative elevator input when the throttle stick is used (Mode 2, so separate sticks).
It is right across all models, and even does it in the calibration exercise.
Any thoughts or experience on what to do?
Cheers,
William
If it is only on one model then I'd check that something wired hasn't been setup like different trims in the flight modes etc. Best of luck
@@Painless360 Hello Lee, thank you for your note. I searched around a bit more on the net, and after unsuccessfully formatting the SD card, the radio came right after removing main and onboard batteries for a few minutes. One more calibration and it's all sorted. Appreciate all your videos. Ta.
I have a request to show us how to set those tensions with those updated gimbals. I bought old ver but fortunately with upgraded gimbals se well. But how to set them?
All via the holes in the front. Images of which hole does what in the listing www.radiomasterrc.eu/shop/accessories/tx16s-accessories/radiomaster-ag01-gimbal/
@@Painless360 thanks 👍
The lack of readable labeling on the side buttons is my main gripe with the TX16S. How they could not correct that on this update is beyond me....
What is the best receiver for Radiomaster TX16 ?
I use whatever is about,. I still have a lot of Frsky ACCST stuff like the X8R and XM+ here..
What about the sugnal range for airplanes?
Nothibg different here. It's the same 4in1 PCB from what I can see.. Happy flying
Do you think dragonlink and radiomaster tx16s mark II can be used together?
I can't see why not, it's a standard regular JR bay. I'd just check what protocol it needs for the bay, I don't use Dragonlink here so don't know..
It would have been really nice if Radiomaster had put a couple of 5.8ghz receivers in there and the option to view a Diversity FPV transmission directly in the controller itself. Maybe in the near future!
There isn't the horsepower in the radio to process the video. It would be nice but the radio would have to cost a lot more..
@@Painless360 On version 2, can you use the access recievers with it?
You say the gimbals are better, but compared to what? The base model V1 gimbals? The V1 Hall Sensor gimbals? I have the V1 with Hall... is the new one better or equivalent?
Compared to V1
Apparently there is a new IPS LCD out and I’d believe it’s a part of a MKII version but you haven’t even mentioned it - shall I assume that the difference is negligible that barely anyone can even spot it?
Do you have EdgeTX on your daily driver, Lee.
I don't. Not yet. All of my models are on OpenTX powered radios but the day is coming closer..
@@Painless360 Thanks for the reply, good to know.
Like the review. Not really with you on the need to be smaller - there are other options out there for that. Definitely with in relation to there being a 5 in 1.
Can model setups be imported into Edge from Open TX?
Yes, except for the widgets. Those you have to do all over again -at least starting from version 2.6.0.
2.5, actually... but once you've upgraded to EdgeTX, no widgets should be harmed during upgrades.
HI LEE - SURELY THE SMALER VERSION OF THE TX16S IS THE TX12 ?? - AND I AGREEWITH YOU ABOUT THE SLIDERS - I PREFER THE FRSKY X9 PLUS FOR FLYING ASTHE SIDE SLIDERS ARE PERFECT FOR FLAPS / SLOILERS / CROW BRAKING - MAYBE WE WILL HAVE TO WAIT FOR MK 3 - BUT I THINK RADIOMASTER ARE FALLING BEHIND DESIGN - LOOK AT THE FRSKY TANDEM OR THE TOP OF THE RANGE FLYSKY - THE MK 11 - DOESNT REALLY HAVE THAT MUCH OF AN IMPROVEMENT - CATCH YOU LATER - TAKE CARE - HAPPY FLYING - DAVID
Does the new v2 radio afford me any new software features that I won’t get on my v1 radio?
Only by virtue of it having EdgeTX. So things like touch screen and improved layouts to the menus etc..
When you are running EdgeTX, it is and will be the same.
either you or Joshua couldnt get custom color aluminiums?? is radiomaster so big firma?
I've asked for orange but they struggle to get the colours already on sale..
@@Painless360 the upper red and the lower blue
pre order that will be available when???
Release day was 6th Apr, so it's already available for order ;)
@@pfeerick website still says pre order
I get a mark 1 yesterday for 200€ with a crossfire module that öittle improvements are not worth it for me to pay 80 euro more its my first controller to try out this hobby. So its okay. If i need more i can build it out myself
Do we know the release date in the UK ?
I'd ask the resellers when they expect stock (i.e. www.unmannedtechshop.co.uk/product/radiomaster-tx16s-mkii/) The lockdowns in China are disrupting shipping at the moment..
Thanks Lee. Great video as always.
Quick questions. If I was to purchase the standard MK2 version:
(1) Can you swap the GNC Gimbals from V1 one and place the ones from the MK2 into V1?
(2) Can I simply install the same version of EdgeTX from my V1 to MK2, copy the entire contents of my V1 Card over to the MK2 (or swap the SD card) so that the MK1 will have all my models and exact settings (include global functions, etc) as the V1?
Thanks,
Sam
1) The gimbal attachment is the same, thus you can install AG01 or FlySky digital gimbals also into TX16S mark II.
2) EdgeTX firmware is the same for the first generation TX16S and mark II. You only need to re-run the calibration.
@@ristokoiva Good to hear. Thank you very much for jumping in to answer my (dumb) questions!
No such thing as a dumb question! Thanks to RK for answering!
It says 16 channel but they stopped making 16 channel recievers so what good is the radio. A bit misleading if you ask me
Depends what recievers you are talking about. You can bind many receivers in a way to get 16 channels of PWM (see my X8R binding options video for example) or by using using something like Sbus or CRSF in the model you can send the full set of channels... Happy flying
No one mentions the charging process! What lights do you see and what do they mean? It's a big secret. I've had many different radios and they all describe the charge process except Radiomaster and all the YTube experts!!
Or, you could ask nicely for a video that covers it and a video might get made.... Happy flying!
@@Painless360 Humble apologies. I spent hours searching. I usually find what I want quickly , especially on your channel!
no delayed april fools joke?
…to big…and…fancy touch screen…if you are sitting on your sofa in a dim lit room…sold and two zorro instead…
Radio choice is a very personal thing. Some want small, some want switches and we are fortunate that we have a decent choice of radios we can choose from. Happy flying