This model is simple to built insofar as it needs only some minor (if any) corrections. It's more or less gluing together the parts. The emphasis is clearly on painting and finishing. A few years ago I built my first car model, the VW Karmann Ghia in 1/24th scale by Gunze from 1993. It was a rather primitive kit, a mixture of several years of construction. I had to make a vacform for the wheel wells and scratchbuild several other items. At that time I didn't know that there are a lot of videos for car modelers on YT...
I bought this kit yesterday and worried a little bit because it seems a big challange for me. But after I watch your video it clearly says this kit is not that hard and I can easily build it :D And yes btw I just found your chanel like an hour ago but man,your videos are truly amazing! Keep up the good work! Greetings from Hungary
The polishing product says to use less than 3000 rpm, but the dremel starts at 5000 rpm, so I'm just using it, but I'm not used to it, so I'm using my hands again these days.
@@Makeitscalees que no hablo en ingles, estaría bueno que tengas traducción en tus vídeos como otras personas que sigo, soy de Argentina y justamente te preguntaba que materiales usas, porque veo lijas que no comentas para lijar los autos y varias cosas mas, igual gracias.... no se si te sirve como referencia otros colegas que tenes pero explican los colores que usan y materiales que van trabajando en su momento.
I do almost every kit this way. Because if you spray surfacer and sand, you can see it well with the naked eye, and it tells you where you haven't worked.
@@LucDesaulniers1 When you cut the front splitter horizontally to make it removeable, you can. Remove the splitter, the body comes off ... with careful tweeking.
![[Full build] McLaren F1 GTR Short Tail Road Car Make It 1/24 Scale step by step build (Fujimi)](http://i.ytimg.com/vi/guBvj3PLMVI/mqdefault.jpg)
![[Full build] McLaren F1 GTR Short Tail Road Car Make It 1/24 Scale step by step build (Fujimi)](/img/tr.png)
![[Full build] Ferrari F50 Make It 1/24 Scale step by step build (Revell)](/img/n.gif)
this video perfectly shows what I need before buying the kit
This model is simple to built insofar as it needs only some minor (if any) corrections. It's more or less gluing together the parts. The emphasis is clearly on painting and finishing. A few years ago I built my first car model, the VW Karmann Ghia in 1/24th scale by Gunze from 1993. It was a rather primitive kit, a mixture of several years of construction. I had to make a vacform for the wheel wells and scratchbuild several other items. At that time I didn't know that there are a lot of videos for car modelers on YT...
Complimenti un colore stupendo ,una laccatura super 😊
Love your attention to details awesome work
I bought this kit yesterday and worried a little bit because it seems a big challange for me.
But after I watch your video it clearly says this kit is not that hard and I can easily build it :D
And yes btw I just found your chanel like an hour ago but man,your videos are truly amazing!
Keep up the good work!
Greetings from Hungary
Thank you for watching and comments! That's a nice kit. Make it cool.
stunning work you are very good at cars mate cheers for sharing
Thank you for watching and comments.
Nice model!! 😀
I Love it.
Good job.
시청 감사합니다~
Very nice 👍👍👍👍👍
New sub here. Great job. What type of paint are you using? I really like that chocolate color for an interior. Great idea and tasteful...
광택기라고 하나요..? 연마기라고 하나요..? 유용한 장비네요.
작업기 잘 봤습니다. 볼수록 에어브러쉬가 탐나네요.
정작 지금은 손으로 작업합니다. 내공이 덜쌓여 익숙하지 않아 촬영에 무리가 있네요 ㅎㅎ 나중에 에어브러쉬 꼭 써보세요 ㅎ 추천합니다.
Fantastic build mate I have question how many coats of clear varnish do you put on as I have polished through to the plastic in the past
Thank you for watching and comment.
I used Super Clear x2, Uletan Clear x1
love it! is that a Dremel you use for polishing? what speeds do you use?
The polishing product says to use less than 3000 rpm, but the dremel starts at 5000 rpm, so I'm just using it, but I'm not used to it, so I'm using my hands again these days.
Kudos, watching your builds it’s Like we have many of same kits. Porsche Spyder 918 Fun Build. I use SMS colour shift paints. KahBoom
꼼꼼한 작업 잘 봤습니다. acid green 색상 페인트는 어느회사 제품인지요? 이제 곧 작업시작하려구요 ~
제로 페인트사 제품을 사용했습니다. 디테일샵이라는 사이트에서 구매 가능한데 제고는 확인해보셔야 할듯 합니다. 함유된 신너로 프라모델이 약간 녹기에 사용이 어렵습니다.
@@Makeitscale 감사합니다 ~ 천천히 뿌려야겠네요 ㅎㅎ
Where do you get these buffing and polishing pads for dremel? I cannot find them at all. Great build too!
Look up Zoomon's products.
What did you use for the discoloration effect? Clear orange? Are you using acrylics or lacquer? Thanks!
I used lacquer paint. gradation mainly use clear brown, black, red, and blue colors.
@@Makeitscale Tamiya or Gunze? I surely need a tutorial on doing that! Thanks!
The brand of paint doesn't matter. Spray to about 1.2 bar.
@@Makeitscale I was just curious. I'll wait for a tutorial on that topic, ;-)
안녕하세요 얼마전 저도 이 키트를 구해서 만들어보려다 제로페인트도 알게 됐는데 마침 영상에서도 사용하셨네요! 제로페인트 도료가 혹시 락카인가요? 그리고 프라가 살짝 녹는다고 하셨는데 도색은 처음이라 저에겐 어려울지...😢
락카 계열이 맞습니다. 제가 쓴 색은 녹는 부분이 다른 색보다는 덜 하여 이 색을 쓰신다면 구매 하셔서 에어브러쉬로 흩뿌리듯 칠해보심이 좋다고 생각됩니다.
@@Makeitscale 답변 감사합니다^^ 혹시 락카면 세척은 군제나 공업용 신너 같은 다른 제조사 제품 써도 되나요?
네 희석은 같은 회사의 희석제를 사용하시고 세척은 공업용으로 하세요. 비싸니까 아깝잖아요 ㅎ
@@Makeitscale 정말 감사합니다 답변 주셨는데 오늘 제로페인트 직구가 몇군데 다 짤렸네요…ㅜㅜ앞으로도 영상 잘 보겠습니다
hola me gustaría que puedas contarnos que materiales usas...? así estamos orientados a tu trabajo, buen trabajo.
Me refiero a las marcas de pinturas. para que tengas una referencia a lo que te digo.
Hi. I didn't understand you. English, please.
Paint uses Tamiya or zero paint products.
@@Makeitscalees que no hablo en ingles, estaría bueno que tengas traducción en tus vídeos como otras personas que sigo, soy de Argentina y justamente te preguntaba que materiales usas, porque veo lijas que no comentas para lijar los autos y varias cosas mas, igual gracias.... no se si te sirve como referencia otros colegas que tenes pero explican los colores que usan y materiales que van trabajando en su momento.
And.. can you please, please send me the link for the polishing attachments and what ever polish you are using? TYVM !!
Polish uses Sujiborido Co.'s Micro Polisher 123 product. It is a company in Japan.
It's better to buy a brand that you can get near the paint.
I have never build any of those before and I wanna try out one and I wonder that do I have to glue every part or can they just click with each other?
Easy kit can be simply assembled. The ones I made need glue and paint.
@@Makeitscale Can I paint it by hand or do I need an spray painter
Hey! I've got a question. Why do you sand on a black undercoat almost to zero?
I do almost every kit this way.
Because if you spray surfacer and sand, you can see it well with the naked eye, and it tells you where you haven't worked.
@@Makeitscale ty mate i try it!
Please tell me why you add a silver coat before base coat of Acid Green.
I chose silver because the base color comes out when I paint with an air brush.
Hi , what type of airbrush do you use for clear varnish
Urethane painted with ps-290
광택내는 저 작은 스펀지는 어디서 구입할수있나요? 뭐라고 검색해야하나요?
www.modelsale.com/modelsale/poprec/detail.php?no=SJB12166&idx1=1&idx2=7&idx3=16&idx4=11
이 제품입니다.
@@Makeitscale 링크까지알려주시고 너무 감사드립니다 ^^
Actually that this a nice colour ? ( English spelling ) what brand ? & colour ?
Zero-paint Porsche Acid Green 2M8 (ZP-1031)
Imagine how he felt when he found out that you can't see the engine
I did academic drawing. You had to draw the muscles, tendons, etc, to then cover them with other layers of paint. Point is, you know are there.
@@LucDesaulniers1 When you cut the front splitter horizontally to make it removeable, you can. Remove the splitter, the body comes off ... with careful tweeking.