ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- MUSIC FOR YOUR VIDEOS (Extra 2 Months Free!):
bit.ly/artlist_...
GET HIGH-QUALITY STOCK FOOTAGE FOR YOUR VIDEOS (Extra 2 Months Free!):
bit.ly/artgrid_...
GET AWESOME PLUGINS:
pluginboutique...
GET ROYALTY FREE AND CREATIVE MUSIC SAMPLES:
www.loopmaster...
loopcloud.com/...
For further info about me and my studio please visit www.zedmarty.com.
----------------------------------------------------------------------------------------------------------------
Facebook: / zedmarty
Instagram: / zedmarty
Twitter: / zedmarty
----------------------------------------------------------------------------------------------------------------
Man that is super helpful even in 2020 ... cheers
YO!! how much does 2020 suck??? but it sucks for us all...so thats cool
Just tried it and immediately my drums sounded better. Thank you very much!
+skymuse awesome, no problem!
Definitely a great trick! Just thought I'd mention for anyone else reading the comments, messing around with the LFO and Flutter can be really interesting as well. I like to add just a subtle intensity and a slow rate to the LFO giving tracks a little pitch wow Like a tape sometimes can. Great for trippy, psychedelic sounds.
+Boone Wallace good idea, thanks!
I’m getting more and more convinced that Logic’s built in plugins are as good as any 3rd party plugins. I’ve done some testing between Logics and UAD for example and it’s hard to tell the differens, and when I do, I’m not sure which sounds the best. I’m sure there are exeptions, but havent found them yet. An example is UAD’s EMT 140 compared to Logic’s plate. When I listen in solo I think the UAD sounds a bit better/warmer, but many times Logic’s works better in the mix. Also compared UAD’s SSL Buss comp vs Logic’s - there I couldn’t say which one sounded the best. I was very tempted to buy the UAD plugin at first, but after the test I just couldn’t motivate it. More and more I just use the built in ones, which is also much lighter to run cpu wise as well.
Thanks dude! I'm convinced there's diminishing returns with the expensive 3rd party plugins vs Logic's - esp for this saturation and vintage EQ. Will try my next project using only LPX's plugins.
This is the secret sauce and I am thankful for it
I tried it. It works. It sounds a lot like my old Akai machine when I used to run it between 0db and +1 back in the Flintstones days. I'm gonna be doing this a lot. You saved me lots of time and plenty of $$$$. Hats off to you, sir!!
That's great to hear! Have fun mixing!
@@ZedMartyProduction I'm always trying to hang on to little bits and pieces of the Flintstones days.
I had a book called "Zen Guitar" the guy said something I never forgot:
"Ride the analog waves like a surfer
Arrange the digital bits like Mosaic tiles"
I firmly believe in the harmony between the two.
Any means toward achieving that end is always helpful and constructive.
Again, I offer sincere thanks.
Great vid indeed. And don't forget about all the console/circuitry convolution samples hidden away in Space Designer!
+Hugelongjohns thanks! Yes right, I may do a video about that in the future!
What do you mean? Would love tht info
@@ZedMartyProductiondid you ever do this video?
This is awesome, thank you. Simplistic explaining and direct to the point! Also third party plugins especially the tape machines eat so much cpu, logic stock plugins are almost weightless, so this is very important
Thanks for the comparison. You can use Tube EQ instead of Channel EQ to get an even better effect.
Wow this was awesome!! I had no idea Logic could do this. I wish I found out about this a year up. Thanks for the upload I hope to see more in the future.
Zed Marty Production this is super helpful. Thanks! TH-cam is so filled with guys telling me to buy everything. It's refreshing to see someone actually do a comparison like this.
Thanks! Even though I also like 3rd party plugins, the Logic ones are always used in my productions. Especially the Vintage EQs!
wow the track is awesome, i rarely see good tunes like these in tutorials around youtube. you've got yourself a new subscriber and supporter! cheers!
thanks mate!
thanks dude! youve saved me atleast 200 dollars lol
what were you gonna buy before watching this?
If you have Logic X, don't buy anything else. Unless you want to. But generally, you don't need to.
@@drmedwuast Except serum
@@zepheriyah
You sure you can't do most of it with Logic's Retro Synth and Alchemy?
@@drmedwuast Definitely not, I have been using Serum for about a year now, after previously using both Retro Synth and Alchemy, and Serum's workflow is so much better, and there are so many things you can do in it that cannot be done in Alchemy. But I am a Dubstep producer, which Alchemy can make Dubstep sounds, but it is much more difficult, some things are not possible in it. But, if you produce other types of music, Alchemy will be more than enough.
That's a pretty good sounding tape effect! I usually use Kramer Tape on my master bus and sometimes on vocal drum subgroups and I'll try this method instead next session and see how it compares.
Yes, I was also surprised! Have fun testing!
Did you do the comparison? I'm curious on how it turned out if you did!
@@Dugzy1117Yes, it's a great flavour, just not as "sophisticated" as Kramer or Slate or Baby Audio's Taip. Recently I have been streamlining my plugins and I find Logic has most things covered these days!
Thank you so much. This is the best video on tape delay saturation
thank you :)
I thought the Logic version beat the hardware emulation plug ins. Thx for this.
Thanks so much. I'm going to try that tape saturation tip on a bass line on one of my tracks!
sounds good, have fun!
this is my favorite now tbh
Cool tip! I hope you continue with these logic x tutorials.
Thanks mate!
Really good video and nice tune too bro
thank you!
That was exactly what I was looking for! Thanks, man!
Great! Have fun mixing!
Great tips, thank you.
+Richard Turgeon you're welcome!
Great video. The waves seem to give a tighter bottom end.
That was very interesting and I 'm going to use that tip..Thank you.
I have been thinking about doing this, but never got around to experimenting with it. Never thought it would sound that good though! Though I am not surprised, I have been using the compressor as a saturater/distortion plugin for a while not and it sounds fantastic as well as you showed too.
+Erik Lauri Kulo Yes, it's a great tool and a cheap alternative to a 3rd party plugin!
Amazing
Really well explained. Thank you.
This is brilliant! Thanks :D
You‘re welcome!
Awesome tutorial, thanks!
great tip. LPX version actually sounds better to me
holy shit this works well thank you!
+Omri Keren you‘re welcome :)
Never knew about this 🔥
Thank you so much for sharing!
Love the Beat 😄🤟🏽🤟🏽
Very useful and impressive video. Thank you!
Thank you!
This was an amazing tip !! Thank you
thank you man! i learned a lot today!
No problem, glad my video could help!
I really like your videos thank you
thank you, you're welcome!
Awesome!
Really cool man.
Thanks mate :)
Really Like this.
BRILLIANT!!! WOW. Thanks
Holyhead.TV thanks mate, you‘re welcome!
clever!! thx for the tip!
awesome, which third party saturation plugins have the frequency select feature?
Question about your mix bus: what's the signal flow here? Everything into mix bus into output, or is it parallel?
Awesome trick!!
Very good, Thank You
You're welcome!
nice finding!
wow this was super helpful even in 2024
Thanks for the tip!
brilliant video - thank you
+MINT beats thanks mate!
wicked!!
wow, how do you switch between the waves / logic mixdowns? you seem to press the mute button but then the other one unmutes automatically?
Thank you.
wow! I always wonder how to do this with logic plugins only!
brilliant , thanks...!
Weel its very intresting. Thanks
cool thanx dude !!
you're welcome!
Wicked thanks for that
Cheers brother!
bless up dude
awesome, thanks!
great vid!
so nice thnx bro
Great vid :)
Thanks!
Great tip! What drum samples are you using in this tutorial?
thanks! Logic Drummer Hip Hop "Maurice" Crate Digger
Thanks!
Nice trick!
Thanks for a great tutorial. Just wondering if there's a reason for the order in which you have the plug-ins on your master channel?
I like Compression before the EQ on the master channel because otherwise the top and low end boosts that I often use on the EQ will trigger the compressor a bit too much.
@@ZedMartyProduction Cool, thanks!
Very nice, how much!!
nice man
Epic!
whats the difference between using these plugins in mono vs stereo format?
None actually, the 2 versions are only for mono or stereo tracks.
Clever!
How did you switch the mute between the two mix downs? Do you like highlight one and then press option or something while clicking? I mean when you were comparing the two mix downs.
I switched between them on my mixing console.
+Ben Babylon alt+click on solo/mute
+Ben Babylon oh sorry, I didn't switch on my console. I just high-lighted one track and pressed "M" to mute. At the same time I clicked mute with the mouse on the other track.
crate digger in the intro and lofi texture loop
I hear that crate digger drum kit all over the place.
Awesome~~~
Does it also work with guitars?? thanks.
+Jo R. Sure!
Anything you want to put it on
Thanks👍🇩🇪
2:15 when you think its pornhub intro song you know theres something wrong with you
Nice tutorial, DOPE beat!
(If you saw my other comment, I erased it. You covered everything I mentioned.)
Brian Mahoney thanks mate!
Thank YOU!
👏🏾👏🏾👏🏾👏🏾
wery like coll
dope futurebass track from using logic!
check it out!
soundcloud.com/billycutcher/dancing-in-my-dreams-blly-original-mix
Nice beat, reminded me of silent hill's ki-no-ko
th-cam.com/video/1h45R3n8VlY/w-d-xo.html
lmao u used logic drums and a logic loop for the intro
Misleading title, it's no secret.
Thank you