I hope you don't stop with the helpful videos!! I see a lot of negative comments, but the video helped me!!! I'm not clear on when you replaced the bearing though?
hey, quick question: what could possibly be wrong with the truck if the big white bolts on the outside or very hot on one side and not the other. It also smells burned almost like rubber. No oil leaking.
Don’t get me line but you might have bearings going out inside of the wheel hub if is grease or oil More than likely it’s burning out that could be dangerous because the wheel can fall off
Im wondering if its your bearings or your brakes that are going out have you measure your deepness on your brake pads also are driving air or hydroaulic brakes
I have a 2004 international dt466 and I jacked up the front passenger tire and it has up and down play from the wheel bearing does it just need adjusted or does the bearing need replaced
I do have to admit these was when i was in diesel school learning but im glad that you caught the errors on these video would you be a better man than me and point out the errors thanks in advance for your constructive criticism
dont learn from these guys , gotta be the worst mechanics ever. im a master tech and carry 12 certifications including welding you are by far the worst. who adjusts and doesnt clean them while its apart HACKKKKS call universal mechanic service in ROC NY for professional service on your home RV and heavys! Masters of all / killed jack
I hope you don't stop with the helpful videos!! I see a lot of negative comments, but the video helped me!!! I'm not clear on when you replaced the bearing though?
hey, quick question: what could possibly be wrong with the truck if the big white bolts on the outside or very hot on one side and not the other. It also smells burned almost like rubber. No oil leaking.
Don’t get me line but you might have bearings going out inside of the wheel hub if is grease or oil More than likely it’s burning out that could be dangerous because the wheel can fall off
INTERNATIONAL 4300 DT466 SOLUTIONS ok thanks! Would you recommend changing the rotors to fix the problem?
Im wondering if its your bearings or your brakes that are going out have you measure your deepness on your brake pads also are driving air or hydroaulic brakes
I have a 2004 international dt466 and I jacked up the front passenger tire and it has up and down play from the wheel bearing does it just need adjusted or does the bearing need replaced
Have some one step on the brake and see if still has the play you possibly have a bad king pin
@@AtlanticTransportation what is a king pin and where is it
Is it oil you see leaking out of the cover, That tells you need to adjust or tighten the wheel ?
No..
Front axle nut size ?
On that not real sure Sir
Never reuse the split pin your already in there replace it
Bro that’s affirmative I should have done that.
so, IT'S 1/8 of a turn not 1/4 of a turn?
1/4 of 1/8th of a turn.
Do as they do, not as they say.
correct me if i'm wrong...you said 1/8 of a turn?./.then you start at 3 o'clock end 12 o'clock..I don't believe it is 1/8 of turn...
ron agullo
Yes your right thats the way Sir
he ended at 1 im sure
Please use a new cotter pin when you put it together.
U know your are correct on that dint think about that
Who in the world invented this trick and what for ??🤔🤔😒
Screws all over the floor so sloppy
Yeah it was a school
You need to learn how to remove split pins plus you need correct tool
pipli.com
Why do thanks
if you don't know don't try to teach
I do have to admit these was when i was in diesel school learning but im glad that you caught the errors on these video would you be a better man than me and point out the errors thanks in advance for your constructive criticism
When you’re an expert, comment on You Tube
dont learn from these guys , gotta be the worst mechanics ever. im a master tech and carry 12 certifications including welding you are by far the worst. who adjusts and doesnt clean them while its apart HACKKKKS call universal mechanic service in ROC NY for professional service on your home RV and heavys! Masters of all / killed jack
Universal Mechanic
Im glad your certified and thanks for advise it would obvious that cleaning is required but are you advertising. Not here buddy
Universal Mechanic it's a school that truck would probably never be used commercially
That was my old tow truck
Another you tube hero
They don’t know what they are doing plus they don’t know how to record
The guys laughing & over talking in the background are so disrespectful