16:07 The whole time i was wondering what she was talking about, then it hit me a few minutes in the drive. At first i thought she was talking about the rattling sound when driving, could be a lose panel or a screw, its very faint but you can hear it. Then it hit me because after dailyling an Fc for over 7 years you understand how the car drives from the smallest detail. That sound she's hearing is normal and is how the car handles at low RPMS, in a rotary car you pretty much have to redline to keep the engine healthy. When in first gear then shifting the car jumps a bit because of the low rpms, then after shifting and raising the rpms it smoothens out (that's the sound/feeling she was talking about right.) It how rotary's are, i love that sound/feeling but i love the sound it makes when at 8k rpms. Just typing all this out really makes me miss my car.
I love Raw POV, if you know what i mean. 😏 GOD i miss my FC Rx7, its been down for months now. It's just that i'm really lazy. I just wanted to hear it again. Thanks for the video, it gave me a little bit of motivation to get the car back on the road.
it was a big vacuum leak for the BAC. there’s this valve that connects 2 different hoses together into the upper intake manifold i left it off when I did my emissions delete. once i put it back on, i set the TPS, and then it was good to go. make sure your throttle cable is also set correctly. check all blockoff plates too if you also did the emissions delete!
it actually wasn’t either of those, it was a valve that was accidentally left off when we did the emissions delete! put it back on and the thing runs great
![[LIVE] : ONE ลุมพินี 83 วันนี้!! คู่เอก "พันฤทธิ์ vs ซุปเปอร์บอล วันของโอม MBK"](http://i.ytimg.com/vi/1b4pkKHa_Fk/mqdefault.jpg)
0:08
That start up brings back memories 🤣
9:23
Yup that's one issue i've noticed only with Rx7's, for some reasons the sun glare is just even worse than any other car out there in an FC.
why she hatin so much at the beginning she don’t deserve you at your best bro
You need to add a fuel pump switch so you can crank with gas off and pop it
Even I was offended when she kept bashing at your idle 😑
rotary things!
16:07
The whole time i was wondering what she was talking about, then it hit me a few minutes in the drive.
At first i thought she was talking about the rattling sound when driving, could be a lose panel or a screw, its very faint but you can hear it.
Then it hit me because after dailyling an Fc for over 7 years you understand how the car drives from the smallest detail.
That sound she's hearing is normal and is how the car handles at low RPMS, in a rotary car you pretty much have to redline to keep the engine healthy.
When in first gear then shifting the car jumps a bit because of the low rpms, then after shifting and raising the rpms it smoothens out (that's the sound/feeling she was talking about right.)
It how rotary's are, i love that sound/feeling but i love the sound it makes when at 8k rpms.
Just typing all this out really makes me miss my car.
I love Raw POV, if you know what i mean. 😏
GOD i miss my FC Rx7, its been down for months now. It's just that i'm really lazy. I just wanted to hear it again. Thanks for the video, it gave me a little bit of motivation to get the car back on the road.
Broooo fire pov vid we gotta get up to the mountains as soon as we get ur car running right 💪🙏
bro she just keeps on complaining 😭
Bro she stay hateing on the rotary 😢
bro is living the dream
Nesquick 🤙 The go to cruising beverage
you know!!
🥰🥰 more content of this please
also do you know why it revs like that ? the TPS or vacuum leak? bc i have the same issue and i know it’s one of the two. going to be diagnosed soon.
it was a big vacuum leak for the BAC. there’s this valve that connects 2 different hoses together into the upper intake manifold i left it off when I did my emissions delete. once i put it back on, i set the TPS, and then it was good to go.
make sure your throttle cable is also set correctly. check all blockoff plates too if you also did the emissions delete!
at 12:00, girl imitating the over-rev warning horn...🤣🤣🤣
which you never came close to. IMHO, just drive the piss out of it!
haha you’re right! don’t worry, we’ll get some high rev action soon
Boss it's hunting idle ecu/wiring issue if you can't find it in through intake or fuel
You'll also lose power if it's not corrected
Tell me its your first time in a rotary
Just sounds like a bridge port idle
It's a stock block. I wish it was ported lol, someday though...
Could be lean at idle, that would make it hunt like that
That thing needs new intake gaskets and some vacuum lines
it actually wasn’t either of those, it was a valve that was accidentally left off when we did the emissions delete! put it back on and the thing runs great
also, love your videos!!
@@chufc3s Thanks! Love yours too, been watching your channel, even got notifications not many of us FC TH-camrs please keep doing it 🫡🖤