Thanks to GBL we had some fun little upgrades to play around, We figured it would be fun to make some toy gun ASMR, and top that up with actual installation guide. Not gonna lie it is a long video, so if you wish to skip ahead just click the short cuts!!
This is one of the best airsoft channels on youtube, it's insane to me you guys don't have more subs. I think you guys are one viral video away from exploding.
Oh my lord I had the same full auto problem on my king arms tws 9mm sbr for over a year. I didn't know how to fix it till this video. If you can explain to me just removing that one bit fixes the issue that would be great. Keep pumping out the great content my guy
@@4UADSmartAirsoft the auto searer prevents hammer follow basically stops it from going off before the bolt is all the way forward (much less relevant in airsoft guns from real guns)
Removing auto sear is not advisable. Under certain conditions like on hot days or the use of CO2 where the valve requires more force to knock open, the hammer might not accumulate enough inertia to reliably knock the valve open if it is allowed to follow the bolt carrier down. Also remember as opposed to a real firearm, the gas blowback rifle starts releasing gas long before the hammer drops all the way, and hammer follow would mean gas is being released before the nozzle is fully seated, causing gas wastage and increasing rate of cool down. Removing the auto sear only masks the problem, like bolt bounce, incorrect tolerance, excessive wear on relevant surfaces, or in this case, the use of a cut-down bolt carrier. If you must use a short bolt assembly, maple leaf makes a similar product that addresses this issue with a telescoping mechanism. Have a look into it.
Glad yo help man, for the URGI build I would recommend the new GHK hop up chamber, performs really nice and you no longer need to take your gun apart. Here is the link: facebook.com/Samoon.tw/photos/a.100545210019247/7290147751058921/
Be aware the average temperature at your area, if it is consistently cold you might need to use some CO2 powered mags. Let us know if you got more questions! :D
I seriously can’t decide on a Vertical Handstop or a full Vertical Grip…. I have smaller hands so I don’t know if I’ll be able to C Clamp the barrel comfortably
Dude need so be an actual gun smith Bru, look at his setup. More organized than like 70% of gun smiths Iv seen. But tbh, don’t let looks fool you, some of the best gun smiths don’t need a hella fancy and organized work space to be amazing at their job
hahaha totally agree man! I''ve seen some dudes do amazing tech work with minimal tools, to be honest there are quite some tools I don't use as often...... So Klab you are right! "it doesn't take a whole lot of tools to do great work"
Hello mate! Love all your videos! I have a tm MTR16 and am wanting to change t he front rail and barrel setup where do I get parts from? If you could help that would be amazing!
@@4UADSmartAirsoft Sure, I tested with another hop up chamber modifying it to fit vsr buckings, it worked fine, but I just wanted to know if there is a chamber that works tith vsr straight up, also, the new GHK chamber that has just been released seems to work with vsr, but the adjusting system is a pain in the ass
@@Holanduzo For this case I only got bad news, so far I don't know if any chamber take vsr10 type of bucking straight up, might need to look around a bit
@@4UADSmartAirsoft Yeah I know, the closest was that captain america hop up, also the new GHK hop maybe uses vsr buckings, but as I said the adjusting system is terrible
You guys are like the number 1 channel when it comes to reviewing airsoft guns. Please do more reviews/customs build not this asmr. You knowledge is needed to us.
thanks for the love man~ we don't like asmr to be honest, but for some reasons we get the most of views with it..... the ASMR will live lol but for 2023 we will add in more knowledge content and upload 1 video per week. Stay tuned! and thanks for the support as always!
Omg I had the same problem with one of my modded GHK m4s. The full auto would only fire once or a couple shots and stop until I switch to single fire. Removing the sear fixes it and it still works?! I'll have to try.
But people who know about guns, like the MCX, soooo....... Besides, AR nuts in the gunworld love these kind of options for their grown man's leggo set.
@@keyboardcommando5146 yeah but the sig has a completely different operating system, it's not direct impingement like an AR. It's doable in a real firearm but you're going to have to make quite a few modifications to get rid of the buffer tube
@@Th3Shrike Completely different is a bit of a stretch, it's not exactly night and day. In fact, certain parts look so close reviewers will often heavily emphasize the parts do not fit an AR-15, despite how they look.
Hello im french , sorry for my english but with your short bolt i'm to obligate remove the buffer and spring buffer ? I have ghk mk18 mod1 and i want more rate of fire and your custom its insame ❤
Good day, I bought a GBL trigger few months for my GHK MK18 (my first gbbr, came from AEG). I was wondering if one can remove/install the trigger, by only removing the trigger pin, or I need to remove both pins, strip, and install? TIA
it was the around the chamber, you got to test it around, because every gun could be different. I would file a spot a little and see if it improves, if so file a little more! just never file too much, because whats gone is gone. hope this helps!
I tried the full-auto fix.. removing that part behind the trigger group: 5 minutes. Realizing it didn't fix it and putting it back: 30 minutes. I'm never touching internals again 🙂
absolutely great video and build, want one myself now... I wonder, how is the recoil with this build? Does it suffer a lot from removing the spring etc.?
so is this a legit DD billeted upper and lower that has been converted into an airsoft gun, or is it a very faithful airsoft clone of a DD rifle? The reason I ask is because of the existence of the buffer tube and buffer system, and the upper and lower billeted parts look like actual rifle parts (minus the barrel, handguard attachment, and lack of a gas system for the BCG). If a conversion, then why buy DD parts and not cheaper receiver parts if it is going to be used for airsoft?
This one is made by RA tech, however the whole body was manufactured the similar production method to real dd. I don’t think they made it so it would actually take real gun parts since that is the last thing Airsoft manufacturers want lol.
Hi, i recently changed my hop up unit after the stock one broke on me, the thing is, that now the daniel defense rail is loose, just a little bit, but it can be moved from side to side, i already screw it tighter, could it be the barrel nut?, Did i miss something?
hummmm normally that should not suppose to happen, try take out all the screws and reinstall it again, and try not tighten the screws one by one, you kind of want to make sure all the screws are at the same height before you starts to tighten it. see if this method works for ya!
That is a sweet MK18! Now that charging handle.. plans to change it out? Does it take a real steel one or can you modify one? A BCM Gunfighter or Radian Raptor series ambidextrous CH would look awesome on your replica(I plan to get one for my real steel AR). Strike Industries make cool looking ones at about half the price. I don't know if any of those companies (besides BCM?) do the replica licensing thing for airsoft versions?
@@4UADSmartAirsoft Just watched a review of a GHK Mk18 MOD.1 Airsoft GBBR by another TH-camr and he claims to be running a Real Steel Geissle CH in his. So it would seem that RS CHs will function. No mention if modifications were needed so?
@@4UADSmartAirsoft Oh thanks. Unfortunately, this model is sold out or not available everywhere in Germany. Are there qualitatively equivalent DD models? It can also be S AEG.
For that case it could be a bad assembly piece, otherwise I would try adding on a bit of tape and than install the rail. That's the cheap way to avoid any kind of wobble. hope this helps
Great vid, thanks! Do you still have recoil due to the missing bufffer-tube assembly? And if so, how much or how much less than before? I would love to run that exact same setup (excet for the shiny parts maybe) as a training-gun, but I don't want to miss those nice kicks to the shoulder. Which also greatly help me improve my grip, of course ;)
Thanks to GBL we had some fun little upgrades to play around, We figured it would be fun to make some toy gun ASMR, and top that up with actual installation guide. Not gonna lie it is a long video, so if you wish to skip ahead just click the short cuts!!
when can i purchase?
Good afternoon! Did I understand correctly that you made GBB from a regular AEG?
@@Vovanenko
no it was gbb
@@torbac.1819 thanks for answer.
"Let's make an already front heavy platform even more front heavy! Wooo innovation!"
I’m a huge fan of ASMR (helps me relax) and guns in general especially cool builds like these. Keep it up! You guys are the future of Airsoft videos!
Hard copy man! Thanks!
So glad to see you back!
That is a must man! I’m glad I’m back!
這部影片簡直是AR GBB教科書級的拆裝教學!!!拍的超有質感超棒
太晚起來錯過首播了啊QQ
沒關係，哥的油好好用
@@4UADSmartAirsoft 感謝您們的肯定與支持!!
你們的稱讚讓我覺得充滿力量
@@4UADSmartAirsoft 折拖轉接座有購買連結嘛😁
Beautiful build! I just got my DDMK18. Can I have the link to the Short bolt? I can find the same color tone
Thanks man! you can contact the shop from the link we provided!
Love those videos! Where You build customs... especially GHK ones !
Thanks man it’s part of my meditation session
This is one of the best airsoft channels on youtube, it's insane to me you guys don't have more subs. I think you guys are one viral video away from exploding.
Fingers crossed and hoping for the best hahaha. Thanks for the support! We will keep up the work!
Holy s*** that is SNAPPY!! Awesome video, enjoyed every second of it!
Thanks man, yah this build really turns this m4 into something really snappy
I don’t know why but, this was the most satisfying video ever
Ohhhhh that is good to hear haha glad you like it man!
Nice vid. Love how organized your workbench is!
Took me a while to get it this organized hahahah
die ist einfach nur meegaaa!!
Die würde ich genauso wie am Ende vorgestellt kaufen.
:D
Eu também
非常棒的影片，詳細拆解GHK MK18！
後托改套帥啊！
改完真的超帥的～希望有幫到大家
Have a GHK Mk18 incoming, this is really useful -- and satisfying to watch!
Haha thanks man I was worried people won’t like this kind of long video
@@4UADSmartAirsoft its relaxing and interesting
Oh my lord I had the same full auto problem on my king arms tws 9mm sbr for over a year. I didn't know how to fix it till this video. If you can explain to me just removing that one bit fixes the issue that would be great. Keep pumping out the great content my guy
Yah to be honest I’m not sure why they still add the auto sear, the gun still functions nicely without it!
@@4UADSmartAirsoft the auto searer prevents hammer follow basically stops it from going off before the bolt is all the way forward (much less relevant in airsoft guns from real guns)
@@Hellkid13 hahaha I agree
@@Hellkid13 it’s very much need in airsoft if you want any accuracy or range on auto
Removing auto sear is not advisable. Under certain conditions like on hot days or the use of CO2 where the valve requires more force to knock open, the hammer might not accumulate enough inertia to reliably knock the valve open if it is allowed to follow the bolt carrier down. Also remember as opposed to a real firearm, the gas blowback rifle starts releasing gas long before the hammer drops all the way, and hammer follow would mean gas is being released before the nozzle is fully seated, causing gas wastage and increasing rate of cool down. Removing the auto sear only masks the problem, like bolt bounce, incorrect tolerance, excessive wear on relevant surfaces, or in this case, the use of a cut-down bolt carrier. If you must use a short bolt assembly, maple leaf makes a similar product that addresses this issue with a telescoping mechanism. Have a look into it.
This video and your mws m4 video have made me want to get a gbbr now.
Gbb is one fun platform to mess with~ but do note they won't perform well under cold weather
That build is sick
Thanks bra glad you like it!
Man I miss good GBBR builds good job
hahaha thanks man, I wish the future ones can be as good
這把是好槍~ 我是買他的兄弟款URGI ，可以再加改"雙邊選擇鈕" 功能性也不錯。
哈哈哈只要有愛~改好後都是好槍!
這是哪個廠牌的？
@@樂悠遊-e3o Ghk
聲音超紓壓的啦，真的是Airsoft的教科書級別
喔喔喔喔我本來以為大家不會喜歡的～沒想到大家會這麼喜歡～～開心
@@4UADSmartAirsoft 對了那把GHK MK18是客製的嗎
Gun received: 08:00am
Gun unboxed: 08:02am
Warranty voided: 08:04am.
Good job.
LOLOLOLOL Soooooo true
That's a very nice rig my friend!!!
Thanks man, that is a must!
Damn!! I guess I'm gonna have to build me a GHK thanks 4UAD keep up the good work ✊🏾
It’s a fun gun to play around! The new gun takes some fine tuning, but it performs beautifully after the tuning
Really liked this! Gonna build a GHK URG-I from scratch, so its always good to see how it tears down.
Glad yo help man, for the URGI build I would recommend the new GHK hop up chamber, performs really nice and you no longer need to take your gun apart. Here is the link: facebook.com/Samoon.tw/photos/a.100545210019247/7290147751058921/
Mesmerizing video, love it!
Glad you enjoyed it!
my god, I love that setup, i've hard horrible experience with Gbbs in the past but this might have be my next purchase.
Be aware the average temperature at your area, if it is consistently cold you might need to use some CO2 powered mags. Let us know if you got more questions! :D
i live in canada so its cold all the time lol
@@quintonfraser4099 for this case I would recommend co2 powered mags otherwise try tokyo Marui MWS :D hope this helps~
Dude, at 33:50 the bb comes out just like the real thing, that's insane X.X
Shit happens lol
I seriously can’t decide on a Vertical Handstop or a full Vertical Grip…. I have smaller hands so I don’t know if I’ll be able to C Clamp the barrel comfortably
when you can't decide, just get them both
太利害了 我第一次看氣槍video. 跟真的一樣. 用的都是好東西. Daniel defense, eotech
其實都是玩具的啦~完不到真槍只好玩看起來像得過過乾癮
Great love for you from Iraq bro❤️ We love these weapons
hahaha thanks buddy, we love toys
Nice build, Insane!!!!!
Thanks Bro
Really enjoyed that video. Quality stuff chaps. What's next for your 4UAD Grading system challenge?
hahaha thanks man, all I can tell is it is VFC related ;D
Nice build and Great video. Thank you.
Thanks man, glad you like this long video
@@4UADSmartAirsoft it was very therapeutic watching you build that gun to perfection!!
@@icolater27 hahaha thanks man , for this case I will make more XDD
best video i seen so far when it diassemble
Hahaha thanks man, I was a little worried you guys might not like this type of video lol
@@4UADSmartAirsoft i enjoyed it man i dont get to see other people do a quality one you guys nailed it
@@jefferytan9981 alright man, now this type of video is good to go! Thanks man! Thanks for the input!
@@4UADSmartAirsoft no problem
this is the asmr for airsoft.
Somehow, I like to play this video as a back ground music when I maintain my gear after a long day fight.
Dude, I'm so glad to hear that man! This means I can happily make more!
@@4UADSmartAirsoft it just gives me a feeling of “we are doing the same shit.”
Lol
@@rwslayer3607 I made it because I need it lol
Awsome build guys!
Thanks man!
Love it bro.. Keep on going..🤗🥰
Thanks buddy! Will do!
Very nice airsoft gun ASMR
Thanks man! Glad you like it!
看樣子SIG MCX的氣動系統研發越來越接近完成了，接下來就看是哪家廠商會搶到頭香推出SIG官方授權的MCX GBBR嘍～
對啊啊啊啊趕快做了啦～～～～哪一家廠快點啦～～
best mk18 custom ever...I'm going to replicate exactly but with hpa...name flash hider?
That's a very nice set up
Thanks man
@@4UADSmartAirsoft You sell units with this set up?
Dude need so be an actual gun smith Bru, look at his setup. More organized than like 70% of gun smiths Iv seen. But tbh, don’t let looks fool you, some of the best gun smiths don’t need a hella fancy and organized work space to be amazing at their job
hahaha totally agree man! I''ve seen some dudes do amazing tech work with minimal tools, to be honest there are quite some tools I don't use as often...... So Klab you are right! "it doesn't take a whole lot of tools to do great work"
Hello mate! Love all your videos! I have a tm MTR16 and am wanting to change t he front rail and barrel setup where do I get parts from? If you could help that would be amazing!
we got our parts mostly from our local stores, but you can try to contact GBL airsoft they got quite some stuff. otherwise IDCF from Taiwan
@@4UADSmartAirsoft thank you for taking the time to reply!
我通常買到新槍(AR槍係)，我會先嘗試將連發撥片移除，一來可以減少不必要的磨損，二來可以增加循環射速(反正不是真鐵)
有兩派說法~有一派說這樣槍機的時序會跑掉....但大家都只用單發XDDD
Is that hop up chamber using vsr buckings? looking for a hop up that works with vsr buckings for quite a long
Hahaha it is close, you need to trim off a little bit of it, but it’s really close. Seems like you and me we care the same thing lol
@@4UADSmartAirsoft Sure, I tested with another hop up chamber modifying it to fit vsr buckings, it worked fine, but I just wanted to know if there is a chamber that works tith vsr straight up, also, the new GHK chamber that has just been released seems to work with vsr, but the adjusting system is a pain in the ass
@@Holanduzo For this case I only got bad news, so far I don't know if any chamber take vsr10 type of bucking straight up, might need to look around a bit
@@4UADSmartAirsoft Yeah I know, the closest was that captain america hop up, also the new GHK hop maybe uses vsr buckings, but as I said the adjusting system is terrible
You guys are like the number 1 channel when it comes to reviewing airsoft guns. Please do more reviews/customs build not this asmr. You knowledge is needed to us.
thanks for the love man~ we don't like asmr to be honest, but for some reasons we get the most of views with it..... the ASMR will live lol but for 2023 we will add in more knowledge content and upload 1 video per week. Stay tuned! and thanks for the support as always!
@@4UADSmartAirsoft looking forward to it. Thank you very much and a happy new year.
Nice tool set.
Not too pricey too, a regular hardware store with 80usd is quite enough to get all the tools on that desk :D
A beautiful weapon, one of these is my dream
Toys indeed
拍得非常好!!!影片再長點就可以當asmr了🤣🤣
感謝啦哈哈哈哈這樣之後這系列不拍短的了XD
Cant wait for the video!
It’s a long one, and it’s not really like the grading system haha use it like background noises lol
Damn that is sick bro!
It’s got some fun airsoft upgrades
Omg I had the same problem with one of my modded GHK m4s. The full auto would only fire once or a couple shots and stop until I switch to single fire. Removing the sear fixes it and it still works?! I'll have to try.
Yah man give it a try, and don’t be afraid to take it apart, you got a video to fall back on to lol
So satisfying ❤
🤗
Damn, really liked a building video of this sort
Hahahaha this means we will make more!
Love how people who know nothing about guns will think it looks cool, but people who do will think it's blursed as heII
Not sure how the real deal will turn out….. might just blow up in my face. But so far the airsoft version turned out ok hahaha
But people who know about guns, like the MCX, soooo....... Besides, AR nuts in the gunworld love these kind of options for their grown man's leggo set.
@@keyboardcommando5146 hahaha as human we all figured things out to make things work
@@keyboardcommando5146 yeah but the sig has a completely different operating system, it's not direct impingement like an AR. It's doable in a real firearm but you're going to have to make quite a few modifications to get rid of the buffer tube
@@Th3Shrike Completely different is a bit of a stretch, it's not exactly night and day. In fact, certain parts look so close reviewers will often heavily emphasize the parts do not fit an AR-15, despite how they look.
I hope the GBL short Bolt system will released marui MWS type
I used marui MWS
they are working on it and will release soon!
@@4UADSmartAirsoft Thank you 👍👍👍
hello, great your video, can we just find the adapter for the stock alone? and what the ref of your crosse thank you to you
I think they have that adopter sold alone
Hello im french , sorry for my english but with your short bolt i'm to obligate remove the buffer and spring buffer ? I have ghk mk18 mod1 and i want more rate of fire and your custom its insame ❤
Hello, I am assuming that there is no VFC version for this yet?
Yep so far we don’t know if there is gonna be any
,very nice ,need,one for,my ,collection.
Gogogo
Love gbbr asmrs lol. One thing though, if you can remove any back ground music that would be even better 👍
Note Taken, Thanks man :D
影片越拍越有質感
不進步不行哈哈哈哈
thanks , im really enjoin the video
Thanks bra, glad you like it!
Great vid! Thanks 🙏
Thanks man hope it’s helpful
I really like the guns in this video. I want to know if you can assemble a gun like in the video for sale? How much will you charge?
sorry buddy, at the current stage we are not able to sell any guns
Remember if you have a tough time getting a spring in cut the 20 minutes of struggling and get to the part that makes it seem easy
hahaha true, we are working on that
lol i love that i wish i was like buy from you nice guilde book bro i love that keep well and may god pless you
🤩🤩🤩🥰😍🥰🤑🤑🤑😋😋😋🌍🌍🌍⭐🌟🌟🌟
haha thanks man, we wish we can ship this out of country too, the cost for shipping is unbelievable
Hey quick question, is that a real steel MAWL at 30:30 or a repro? Where did you get yours?
Oh it’s a fake one made in plastic, we have those around in taiwan for around 3200 NTD
Is there a retailer that sells one? I've been meaning to get one on my MK18 and rock that with my T1 optic
@@MrKoala-kv5qd hummmmmm maybe try out this one? 【侵掠者】MAWL-C1+ 風格多功能LED槍燈鐳指器-沙色-強化塑膠材質-紅鐳版
www.ruten.com.tw/item/show?22129885146323
Hope this helps
@@4UADSmartAirsoft Sweet, ill check it out once I get up for work in the morning, I appreciate it! Badass mk18 build btw!
Good day, I bought a GBL trigger few months for my GHK MK18 (my first gbbr, came from AEG).
I was wondering if one can remove/install the trigger, by only removing the trigger pin, or I need to remove both pins, strip, and install?
TIA
I had the same idea, but sadly it is actually easier to remove 2 pins instead of one. Hope this helps
Thanks for the reply.
It will be my first time stripping a gbbr, and installing an upgrade.
@@tatagacusan5482 This Video is pretty clear, hope this will help! Good luck! th-cam.com/video/ZdsPRlHPJvw/w-d-xo.html
anyone knows what is the funtion of the button he presses in the 33:21? ty in advanced :D
It actually does nothing to the airsoft gun, for a real gun it is used to push the bolt
@@4UADSmartAirsoft ohh i see thanks man
Hello, love your videos. Could you explain where exactly in the chamber you filed? I have the gbl bolt and npas nozzle as well and the nozzle jams
it was the around the chamber, you got to test it around, because every gun could be different. I would file a spot a little and see if it improves, if so file a little more! just never file too much, because whats gone is gone. hope this helps!
@@4UADSmartAirsoft thanks for your tip!
I tried the full-auto fix.. removing that part behind the trigger group: 5 minutes. Realizing it didn't fix it and putting it back: 30 minutes.
I'm never touching internals again 🙂
It is freaky for certain
Awesome!!
Thanks
Awesomeee 😍😍😍
Thanks Bro!
absolutely great video and build, want one myself now... I wonder, how is the recoil with this build? Does it suffer a lot from removing the spring etc.?
Nope it’s still there, I mean it’s slightly less but snappier lol
so is this a legit DD billeted upper and lower that has been converted into an airsoft gun, or is it a very faithful airsoft clone of a DD rifle? The reason I ask is because of the existence of the buffer tube and buffer system, and the upper and lower billeted parts look like actual rifle parts (minus the barrel, handguard attachment, and lack of a gas system for the BCG). If a conversion, then why buy DD parts and not cheaper receiver parts if it is going to be used for airsoft?
This one is made by RA tech, however the whole body was manufactured the similar production method to real dd. I don’t think they made it so it would actually take real gun parts since that is the last thing Airsoft manufacturers want lol.
It's China = knockoff
What is the muzzle device / muzzle break you installed near the end? It looks awesome on that build!
www.kui.com.tw/PA0D35025SO9/ This one!
This short Bolt Carrier kit works in the GHK Platform?
Yep! That is what it is designed from :D
期待BCMMCMR！！！！！
這支真的很欠拍
Nice vids
Thank bra!
i have a nice time watching this video 🥰😍
Thanks man! Glad you like it!
Wish you can do this to real steel would be dope !
Yep that would be super dope
The bolt is half travel, i will pick we aks 74u. Just kidding. Very nice vid.
Hahahaha thanks man, wonder when people are goin a make some aftermarket parts for ak
My WE M4CQBR, seems to better built quality wise.. I've later built it Mk18 DD.
With love, every gun is a good gun :D
24:13 May i suggest you get yourself an air compress blower duster thingy? just a suggestion.. 😬😬😬
Beautiful suggestion indeed! Just ordered one! Thanks man!
Does no auto sear affect shot to shot consistency in auto?
People say it mess your trajectory and gas efficiency but I haven't encounter that just yet. I did that to mine URGI, and it works great too!
Greate custom and I love this one!
Could you tell me the laser aiming module that you used?(flashlight?)
It is called the MAWL I like how they combines everything together
@@4UADSmartAirsoft Thanks to reply!
What is the folding stock and where can I find one great video by the way
Thanks man, the stock is from 5ku you can look it up from their fan page we provided below
Hi, i recently changed my hop up unit after the stock one broke on me, the thing is, that now the daniel defense rail is loose, just a little bit, but it can be moved from side to side, i already screw it tighter, could it be the barrel nut?, Did i miss something?
hummmm normally that should not suppose to happen, try take out all the screws and reinstall it again, and try not tighten the screws one by one, you kind of want to make sure all the screws are at the same height before you starts to tighten it. see if this method works for ya!
@@4UADSmartAirsoft thank you so much, i took your advice and now its as sturdy as before, sorry, im still a noob 😅
I need to see the bolt and the charging handle cause I want to do the same with my golden eagles gbb m4 that includes the folding stock
See if you can get it from the link below!
That is a sweet MK18! Now that charging handle.. plans to change it out? Does it take a real steel one or can you modify one? A BCM Gunfighter or Radian Raptor series ambidextrous CH would look awesome on your replica(I plan to get one for my real steel AR). Strike Industries make cool looking ones at about half the price. I don't know if any of those companies (besides BCM?) do the replica licensing thing for airsoft versions?
I think the charging handle will need some modifications for sure
@@4UADSmartAirsoft Just watched a review of a GHK Mk18 MOD.1 Airsoft GBBR by another TH-camr and he claims to be running a Real Steel Geissle CH in his. So it would seem that RS CHs will function. No mention if modifications were needed so?
Shorter bolt means higher rpm yes？ and also less
Gas used to blow the bolt back right?
Yep you got that right, gas efficiency wise we have not test it yet …. So I’m not sure. But rate of fire….yes it increased quite a bit.
This is so sick
It was a fun project
Hello, which airsoft is exactly the base model here? I only find those with other markings
This is the RA tech DD MK18, with full trademarks
@@4UADSmartAirsoft Oh thanks. Unfortunately, this model is sold out or not available everywhere in Germany. Are there qualitatively equivalent DD models? It can also be S AEG.
nice vid! What equipment do you use for audio input & how many camera was set up to make this incredible satisfying video?
We used Rode, and its a pricey one and the camera we had at least 2 ;D
I have one of these and the rail wobble is really bad any fix for this or did I just get a lemon
For that case it could be a bad assembly piece, otherwise I would try adding on a bit of tape and than install the rail. That's the cheap way to avoid any kind of wobble. hope this helps
@@4UADSmartAirsoft it's unfortunate as its my first experience with ghk and for the price I expected quality thank you for the advice
期待bcm mcmr gbbr!!😍😍😍
Vfc 接洽中
貓貓可愛
超療癒系動物
Pleeeaasseee do an MWS build next
For sure man!!!!
Great vid, thanks!
Do you still have recoil due to the missing bufffer-tube assembly? And if so, how much or how much less than before?
I would love to run that exact same setup (excet for the shiny parts maybe) as a training-gun, but I don't want to miss those nice kicks to the shoulder. Which also greatly help me improve my grip, of course ;)
haha the recoil is still there, slightly less but snappier, For a CQB GBB set up its perfect!
@@4UADSmartAirsoft Thanks!
damn, sweet. good job pal
Thanks for the support too!