Dude you saved my pistol!! Thank you!!!! That was exactly it! I put my spring in backwards not paying attention! You saved me!!!! Yes Lord Jesus thank you!!!!!!!!!! Great video/information!!!
New to Glock. Not new to fire arms. It almost felt embarrassing that I couldn't remedy this my self but thanks to you video I am a lot more confident in my assembly and disassembly of my G34.
Thank you sir you’re a lifesaver I was getting ready to take my Glock to a gunsmith. I was cleaning my pistol and when I got to put it back somehow I got stuck on the frame I tried everything and I tried couldn’t get it unstuck and I started to freak out but then I found your video. You are greatly appreciated. Thank you again.
Awesome videos! Wealth of invaluable knowledge! I've never put RSA in wrong but recently cleaned trigger housing etc, and 1st I has no "tactile" reset, and then after trying again, slide wouldn't come off and trigger wouldn't pull... But using your push forward and force trigger method it worked!
@fireteammichael1777 Thank you so much! Yes, I think most of us can say that we've made some sort of "misstep" during reassembly, we just don't like to admit it.. 😄
Love your videos. I'm very happy to hear the proven traditional methods of gun handling & marksmanship. It's a breath of fresh air and a break from the 'tacticool'... I've changed my grip and stance based upon your advice.
Thank you for this great video. As far as you know I did this too 😂. After installing some Gucci trigger parts and springs I encountered a “working Trigger” but no firing pin release. Oh, No Happy Ending for me😢. Could not get the slide off the frame. Followed your instructions and was back in action in a flash. Thank you for being out there!
I've missed the back slide rails more than once and got it stuck. I luckily was able to just strike the back of the slide and it popped off. It never did any harm to the gun. I was scared first time it happened though. I make sure i am paying attention now when i reattach the slide.
@Mathew Sheaffer, Yep, not hard to misalign them, especially if you're in a hurry or have other things on the brain at the same time. Sounds like you caught yours just in time, brother 👍
Great help! 💯 Question please... G19, Gen 3. When replacing the slide, I now need to push the trigger bar forward until it clicks. If I don't, it makes contact with the firing pin safety and the slide will NOT go on. Any idea why this is happening after about a year? Thank You!
The vertical extension on the trigger bar should easily push the spring loaded FP safety up without a problem. Is the spring in the FP safety still working? You might have some resistance when putting the slide back on, but it should still work. If not, I would suggest letting a gunsmith or Glock armorer take a closer look at it. Good luck, brother 👍
I've never had this problem, but its good to know JIC. Two questions for ya, what type of holster is that on the table, an what do you have in that SKS jar on the table ?. Big SKS fanboy, an love plinking mine, its a very dependable platform that I'm comfy with, nothing wrong with AK's, just like SKS alot more, 1 is type 56 norinco , the other is a Yugoslavia, great fun plinkers in my book. Thx for the vid Antonius
@William McCaslin Thanks bro. The holster is an adjustable nylon thumb break by "Bulldog", clip on and belt slide, both. My SKS jar has a couple of Murry's firing pins, extra FP springs, and a couple of original firing pins for my 1951 Russian SKS and my Jianshe factory 1967 SKS.
@stevenvlogss8505 ? Wow! Hmmm, hard to say without examining it, but is it possible to remove the slide's backplate? If so, try taking out the firing pin so that it's lug doesn't hang up on something when you slide it forward to remove it. 🤷
I have a slide seized up due to corrosion (has a live round in the chamber) wondering if its safe to fire to possibly break it free (maybe putting it in a vice and firing using a string)ive used shooters lube to try to help it unseize to no avail...
so my slide is stuck and won’t come off the trigger won’t make the click I changed the housing trigger so I messed up somewhere but because my spacer sleeve is (worn out ) I can’t push it down to remove the back plate so how else can one go about removing it
@cjburos83 It's difficult to answer without examining it, so in this case it may be best to take it to a Glock armorer in your area to avoid possible damage. I'm hesitant to give advice on this one without first seeing it.
Had it stuck once and still don't know what happened. I think the RSA wasn't seated properly. It was stuck way out the front the gun and the trigger was stuck forward. I locked the slide back hoping I could get a look inside but then I found I could pull the trigger and everything just fell apart aftet that.
@Syrin123, Yes I've heard that incorrect seating (in the wrong notch) of the RSA can also be the culprit. I forgot to make mention of that, so thanks for bringing that up 👌. And it sounds like you've discovered another remedy to it as well, which I really appreciate that info. Thanks for watching, friend! 👍
@Walt.s5 If you've tried everything and nothing is working yet, your best bet would probably be to take it to a local gunsmith or Glock armorer. Most of the gunshops/dealers in your area should have one there. Good luck! 👍
My mom bought a 380 yesterday and she asked me how to use it I showed taking the magazine in and then I pulled back the slide it got stuck I figure it’s a lube issue because it’s brand new
@Larry Farris, Thank you, sir! It's the Greek phrase "Molon Labe" ("come and take it") uttered by the Spartan King Leonidas to the Persian King Xerxes at the battle of Thermopylae. Thanks for watching, my friend 👍
My situation is different, I own 3 glocks prior, now a 4th which is G34, I am playing with it and once back the slide went over the rails and now the pistol is locked; yes, my fault but what a piece of shit these are, I cant help thinking, gen 5 should not have this issue even to allow operator to introduce it!! I mean it is a glock after all, right glock fan boys??? now I am in the internet trying to find what to do to fix it and hope I did not brake this new out of the box firearm! I was hesitant to get it as you can tell I am NOT a glock fan boy, I do own 3 but I have never had this or any issues with any of them; so I have been neutral in my opinion up until now! I never seen something like this and I can not even explain how in the hell the slide ended over the rails when I am assembling it back! This video did not help me as these situations here are different, none of the rear controls of the slide are touching the frame at all; the slide is in an angle from front to back with relation of the frame, now operator error or not that is a bull shit shitty design and prove me wrong!
@@zakiyen-p9t If you can remove the backplate, try to pull out the firing pin. If you remove the FP, try to insert a small punch to trip the sear from the FP lower lug.
![Glock 17 Vs Glock 19 [Easy Choice, But Not For Everyone]](http://i.ytimg.com/vi/tIdn3S_6MkI/mqdefault.jpg)
![Glock 17 Vs Glock 19 [Easy Choice, But Not For Everyone]](/img/tr.png)
Dude you saved my pistol!! Thank you!!!! That was exactly it! I put my spring in backwards not paying attention! You saved me!!!! Yes Lord Jesus thank you!!!!!!!!!! Great video/information!!!
New to Glock. Not new to fire arms. It almost felt embarrassing that I couldn't remedy this my self but thanks to you video I am a lot more confident in my assembly and disassembly of my G34.
I've never put the slide on without putting the barrel and recoil spring in, as far as you know. Thanks for remedies.
Thanks Antonio! Accidentally reassembled with the trigger forward. Fixed within seconds of watching your video.
@bobpez317
Lol yessir, I've been there myself! Thank you for watching, my friend 👍
Thank you sir you’re a lifesaver I was getting ready to take my Glock to a gunsmith.
I was cleaning my pistol and when I got to put it back somehow I got stuck on the frame I tried everything and I tried couldn’t get it unstuck and I started to freak out but then I found your video. You are greatly appreciated. Thank you again.
You are absolutely correct with this helpful video. I am an experienced glock shooter and I have done this. Being in a hurry or distracted. Thanks!
Thanks so much. I was polishing my feed ramp for my gx4 barrel and this trick worked for my Taurus as well. I was starting to panic a little. Lol
I've been running glocks for 25 years and this video would have saved me a ton of on the job training 👍
Thank you. I recently purchased a Glock 19 from a friend of a friend and it was locked to the frame and your techniques worked 🙏🏼
@alexhuerta9309
Glad I could help out, brother. And thanks for watching! 👍
Bruh I’m so glad this video is up! I literally just did this on some “hmm I wonder what this would do” type stuff lol
Sir, you just saved me much frustration!!!! MUCH thanks for your help.
Awesome videos! Wealth of invaluable knowledge! I've never put RSA in wrong but recently cleaned trigger housing etc, and 1st I has no "tactile" reset, and then after trying again, slide wouldn't come off and trigger wouldn't pull...
But using your push forward and force trigger method it worked!
@fireteammichael1777
Thank you so much! Yes, I think most of us can say that we've made some sort of "misstep" during reassembly, we just don't like to admit it.. 😄
Love your videos. I'm very happy to hear the proven traditional methods of gun handling & marksmanship. It's a breath of fresh air and a break from the 'tacticool'... I've changed my grip and stance based upon your advice.
@Dave Taylor
Thank you, sir! I really appreciate your comment, friend 👍
I've had my glock for 10 yrs. This just happened to me. Idk what I did. Thank you for this video.
Very useful information! Needs more upvotes! 💪
Thank you for this great video. As far as you know I did this too 😂. After installing some Gucci trigger parts and springs I encountered a “working Trigger” but no firing pin release. Oh, No Happy Ending for me😢. Could not get the slide off the frame. Followed your instructions and was back in action in a flash. Thank you for being out there!
Thanks, my uncle was gonna charge me for a new one if I couldn't fix my dumb mistake.
I appreciate you, I hope that you hit a really generous lotto for you and your family really talk
Thank you for the information ..you just saved me from a little hart attack😂😂😂..just kidding but thanks i forgot to put he spring and barrel back
I've missed the back slide rails more than once and got it stuck. I luckily was able to just strike the back of the slide and it popped off. It never did any harm to the gun. I was scared first time it happened though. I make sure i am paying attention now when i reattach the slide.
@Mathew Sheaffer,
Yep, not hard to misalign them, especially if you're in a hurry or have other things on the brain at the same time. Sounds like you caught yours just in time, brother 👍
Great help! 💯
Question please... G19, Gen 3. When replacing the slide, I now need to push the trigger bar forward until it clicks. If I don't, it makes contact with the firing pin safety and the slide will NOT go on. Any idea why this is happening after about a year? Thank You!
The vertical extension on the trigger bar should easily push the spring loaded FP safety up without a problem. Is the spring in the FP safety still working? You might have some resistance when putting the slide back on, but it should still work. If not, I would suggest letting a gunsmith or Glock armorer take a closer look at it. Good luck, brother 👍
I've never had this problem, but its good to know JIC. Two questions for ya, what type of holster is that on the table, an what do you have in that SKS jar on the table ?. Big SKS fanboy, an love plinking mine, its a very dependable platform that I'm comfy with, nothing wrong with AK's, just like SKS alot more, 1 is type 56 norinco , the other is a Yugoslavia, great fun plinkers in my book. Thx for the vid Antonius
@William McCaslin
Thanks bro. The holster is an adjustable nylon thumb break by "Bulldog", clip on and belt slide, both.
My SKS jar has a couple of Murry's firing pins, extra FP springs, and a couple of original firing pins for my 1951 Russian SKS and my Jianshe factory 1967 SKS.
@@shootinitstraight4162 I only hope to get a russian in my collection, thx
My gen4 19 continually did this until I replaced the RSA with a gen3 RSA. Hasn't happened since
i mixed a glock 22 slide on a 19x frame and now it’s stuck pulled back and trigger is pulled help please
@stevenvlogss8505
? Wow!
Hmmm, hard to say without examining it, but is it possible to remove the slide's backplate? If so, try taking out the firing pin so that it's lug doesn't hang up on something when you slide it forward to remove it. 🤷
What if my slide still won't come off after doing all these steps?
@adamtucker9651
I would suggest taking it to a certified gunsmith.
What if trigger and slide is stucc
What if the triggers stucc
I got one for you. Slid a long slide barrel into my g20 and now she’s jammed
@ojr6857
🫣🤔🤔
What if the spacer sleeve is torn ?
@burgos632
It's easily replaced after the slide is removed. Not sure how it could tear, but anything is possible I suppose.
I have a slide seized up due to corrosion (has a live round in the chamber) wondering if its safe to fire to possibly break it free (maybe putting it in a vice and firing using a string)ive used shooters lube to try to help it unseize to no avail...
@Brianwarner1782
I think I would probably take it to a certified gunsmith. He may know of a safe method to proceed.
@@shootinitstraight4162 yeah i was going to probably go that route
Thank you bro just put a new frame and the slide won't come off it goes like half and inch and get stuck going to take off back plate
@JayKennedy-vr5ej
Hope I was able to help! 👍
you got it push and pull Triger fixed
Couldn’t get my slide off for the life of my this video helped in seconds
so my slide is stuck and won’t come off the trigger won’t make the click I changed the housing trigger so I messed up somewhere but because my spacer sleeve is (worn out ) I can’t push it down to remove the back plate so how else can one go about removing it
@cjburos83
It's difficult to answer without examining it, so in this case it may be best to take it to a Glock armorer in your area to avoid possible damage. I'm hesitant to give advice on this one without first seeing it.
@@shootinitstraight4162 makes sense thank you
Had it stuck once and still don't know what happened. I think the RSA wasn't seated properly. It was stuck way out the front the gun and the trigger was stuck forward. I locked the slide back hoping I could get a look inside but then I found I could pull the trigger and everything just fell apart aftet that.
@Syrin123,
Yes I've heard that incorrect seating (in the wrong notch) of the RSA can also be the culprit. I forgot to make mention of that, so thanks for bringing that up 👌. And it sounds like you've discovered another remedy to it as well, which I really appreciate that info. Thanks for watching, friend! 👍
I put my spring on wrong and now I can’t dismantle it doesn’t matter how much force I use
@Walt.s5
If you've tried everything and nothing is working yet, your best bet would probably be to take it to a local gunsmith or Glock armorer. Most of the gunshops/dealers in your area should have one there.
Good luck! 👍
Great tutorial! Thank you!
Thank You Sir it worked. You know your Glocks!!!😀
@pcengrav
Thank you sir, glad I could be if some assistance. 👍
My mom bought a 380 yesterday and she asked me how to use it I showed taking the magazine in and then I pulled back the slide it got stuck I figure it’s a lube issue because it’s brand new
Never mind I figured it out the slide stayed open because the magazine was empty that what the gun does after shooting all the bullets
Sir you saved me my force my glock hahaha i have half hour trying thank you
@moreoptions5224
Glad I could help you, my friend. And thanks for watching!👍
You Helped me Big Time!! Thank you!!
@SoCalCrawlers
So glad I could help! And thank you for watching 👍
Slide is stuck on my Glock 48 after using a 15LB recoil spring. I think it’s because it’s a single spring instead of the new design dual spring setup.
@mr.blanco6763
Yeah, I believe the recoil spring assembly for the 48 is indeed a dual spring type.
You saved me a trip.
You are amazing thank you!
Thanks for this!
Thank you so much second fix worked for me
@@a.dot.mackaveli3469
You re quite welcome, sir! Glad I was able to help, and thanks for watching! 👍
Thx, very helpful. 👍
Thank you! Works 100%
Thank you so much! I thought i ruined mine
Thank you. 😊 👍🏼
Thank you sir!
Thanks a lot, this helped
Thank you
God bless you. Thank you!!
Appreciate you this shit worked
What’s the design on your Glock back plate? 🫣. (Thanks for the video… very informative!). 👍
@Larry Farris,
Thank you, sir! It's the Greek phrase "Molon Labe" ("come and take it") uttered by the Spartan King Leonidas to the Persian King Xerxes at the battle of Thermopylae.
Thanks for watching, my friend 👍
thank you!
Thank you!!!!
Thanks 👍
i appreciate that 😂👍
Subscribed
NICE 😊
I love u thank you
06-12-24 … your awesome.. thank you sir.. it happened to me .. shoot it straight brother
@jeffreyjones2062
Thank you so much kind sir, I appreciate you 👌👍
Thank you Mr. White man 👌🏿
My situation is different, I own 3 glocks prior, now a 4th which is G34, I am playing with it and once back the slide went over the rails and now the pistol is locked; yes, my fault but what a piece of shit these are, I cant help thinking, gen 5 should not have this issue even to allow operator to introduce it!! I mean it is a glock after all, right glock fan boys??? now I am in the internet trying to find what to do to fix it and hope I did not brake this new out of the box firearm! I was hesitant to get it as you can tell I am NOT a glock fan boy, I do own 3 but I have never had this or any issues with any of them; so I have been neutral in my opinion up until now! I never seen something like this and I can not even explain how in the hell the slide ended over the rails when I am assembling it back! This video did not help me as these situations here are different, none of the rear controls of the slide are touching the frame at all; the slide is in an angle from front to back with relation of the frame, now operator error or not that is a bull shit shitty design and prove me wrong!
You people talk to damn much, just get on with it
@jeffreyking2190
My friend, do feel free to skip the video if you're that impatient 👍
You talk too much.. 6 min video could have been 2 minutes.
@chuckpeters1
And you complain too much
Yah be happy to have a solution thanks to this man . Chuckpeters1 your a Dick 😂
What if trigger and slide is stucc
@@zakiyen-p9t
If you can remove the backplate, try to pull out the firing pin. If you remove the FP, try to insert a small punch to trip the sear from the FP lower lug.
Thank you ❤
Thank you sir