Guys I forgot to add my Banggood link to the Emax Nanohawk... here it is if you want to help me out. Buy yours here. Thanks guys Justin : bit.ly/3lC5DSN
Thanks for the review and comparison Justin. I picked up a tinyhawk s months ago and wanted to bind it up to my new xlite s controller. After hours of frustration i gave up on it and bought a radiomaster tx16. Solid. I love how that little puppy flies! Tinyhawk 2 just showed up yesterday and i'm lookin forward to the maiden. Fly high
Looks like a nice little quad, but 25mw only, antennas susceptible to prop strikes, just one battery included, stationary camera, phillips head screws, hello jello, and now for the big one, NO CASE! It comes in a cardboard box. Ahhhh! This is not the normal Emax home run new release we're all accustomed to. I think Emax spoiled everyone in the past. Now they have to top all their other super fantastic quads. Although, I still believe it is a must have. Happy holidays Justin!
Great review! I agree with your top 5 pics. I took the uz 65(crossfire) and put it in a Microheli frame for Mobula 6. I had to mod frame to get FC to fit. This is the best micro I ever had. I fly in acro with out any snap back and has great penetration. Thanks
Just got a Nanohawk, imo it is not a beginner drone. I am a beginner, started flying in Aug 2020. I am comparing this to my first quad a Mob 6. This thing can’t take a bump or a crash. I’m thinking of getting rid of it because I spend more time straightening out props than flying.
Do you know if you can use the 1s 450mah batteries that came with TH2FS with the nanohawk? i understand the connector is different, but can they be converted with a converter? and would they work in the quad?
I liked your review, especially how you broke it down to the top 5 brushless 65mm whoops for this 2020 holiday season. The Zeus looks interesting, but the Eachine Nano 400 is still more power and less weight (although, no fancy heat spreader).
It should. But you need to solder + and ground wires too. Tracer supports Crsf and Sbus protocols. So you may just solder it on where xm+ was yeah. Swap a roni. Remember crossfire is Taer in the Betaflight radio channels tab. XM+ for me is AETR. Change to TAER and your tbs sticks should move correct in Betaflight.
The only thing with that charger is it does not have a discharge function for storage ........that is why I would get the VIFLY WhoopStor 1S LiPo Battery Storage Charger and Discharger and use adapters. Just IMO!
You know the mob6 is pushing up to 230mw on the 500mw setting. It has been tested but man the range is great on it. Either way, I don't thin you could go wrong with any of these.
Sorry to say that, but I can't watch a video, where I have to listen to someone talk into one ear. Mixing the two audio channels together in the editing software is not hard to do, but it's unbearable to watch especially with earphones on, if the sound is out of place like that. If you don't want to edit audio, then at least use a mono mic and put the recording it on both audio channels.
I think I will get the TinyHawk II and switch the camera for a Caddx ANT. Then I will have a slightly more durable and more child-safe (less dangerous) quad with a greatly improved camera. In COVID-times I need some kwad to fly short times between all the meetings to not get totally mad of home office.... The benefit of TinyHawk II is that I can use my 1S 520 mAh packs that I have purchased for my FPV Cycle Babytooth. A hint: you should definitely would need to get into contact with KababFPV, alias Bob Roogi, alias head of FPV Cycle and get a 1S 3" BabyTooth, that is a sensation.
Guys I forgot to add my Banggood link to the Emax Nanohawk... here it is if you want to help me out. Buy yours here. Thanks guys Justin : bit.ly/3lC5DSN
So would you say it was 'worth it' to add the Zeus for 100mW?
Please review happymodel moblite7 and moblite6
Thanks for the review and comparison Justin. I picked up a tinyhawk s months ago and wanted to bind it up to my new xlite s controller. After hours of frustration i gave up on it and bought a radiomaster tx16. Solid. I love how that little puppy flies! Tinyhawk 2 just showed up yesterday and i'm lookin forward to the maiden. Fly high
Great review brotha love the top 5 list nice work !!
Looks like a nice little quad, but 25mw only, antennas susceptible to prop strikes, just one battery included, stationary camera, phillips head screws, hello jello, and now for the big one, NO CASE! It comes in a cardboard box. Ahhhh! This is not the normal Emax home run new release we're all accustomed to. I think Emax spoiled everyone in the past. Now they have to top all their other super fantastic quads. Although, I still believe it is a must have. Happy holidays Justin!
Hi!, Is it possible to install LED strip to this drone with soft serial?
It's nice to get a honest review and comparison .
Great review! I agree with your top 5 pics. I took the uz 65(crossfire) and put it in a Microheli frame for Mobula 6. I had to mod frame to get FC to fit. This is the best micro I ever had. I fly in acro with out any snap back and has great penetration. Thanks
Of all the reviews of this I'm watching yours first🏁
Thanks HG!!! 💪🏻⚡️
Nice Review and the intro is amazing
Thanks man!
You know the vtx board has cutout lines so you can cut it down smaller to fit your quad right?
How’s you get the jello out, mines is horrible 🥴
Thanks for making and sharing mate- can always rely on you having covered a quad I’m interested in 👍🤝🤗
Emax Nanohawk 20g
Tazkiller85
look between 13m30 and 14min he said that you can change the power from the vtx...
Could I solder a tracer nano in this? Could a betafpv f4 fit in this? Thanks
Just got a Nanohawk, imo it is not a beginner drone. I am a beginner, started flying in Aug 2020. I am comparing this to my first quad a Mob 6. This thing can’t take a bump or a crash. I’m thinking of getting rid of it because I spend more time straightening out props than flying.
Do you know if you can use the 1s 450mah batteries that came with TH2FS with the nanohawk? i understand the connector is different, but can they be converted with a converter? and would they work in the quad?
does your beeper work ? mine doesn’t beep when in lost mode
I see in some video that you can change the power on the vtx is in french but I will send you video and say the time on the video how he make it.
I liked your review, especially how you broke it down to the top 5 brushless 65mm whoops for this 2020 holiday season. The Zeus looks interesting, but the Eachine Nano 400 is still more power and less weight (although, no fancy heat spreader).
Thanks Brandon. Yeah I have one of those but I seem to have lost it. 😛
Nice!
Always wanted to get into FPV
Do it!
Do you think I could get a tracer nano tx on this? Using t1, r1 ? Dying to try this
It should work !
@@dronecamps if mine comes with frsky then i solder in tracer will it override the frsky?
It should. But you need to solder + and ground wires too. Tracer supports Crsf and Sbus protocols. So you may just solder it on where xm+ was yeah. Swap a roni.
Remember crossfire is Taer in the Betaflight radio channels tab. XM+ for me is AETR. Change to TAER and your tbs sticks should move correct in Betaflight.
I want to put new vtx in mine but I don't think I can get the stock vtx out without damaging stuff. How did you do it?
Carefully one side at a time. I broke the stock vtx removing it.
@@dronecamps yeah I think snapping the vtx in two pieces might be the key.
Just opened mine up and it bond to my qx7 and then I turn in my Fatsharks and no vtx, anyone have this issue?
The only thing with that charger is it does not have a discharge function for storage ........that is why I would get the VIFLY WhoopStor 1S LiPo Battery Storage Charger and Discharger and use adapters. Just IMO!
You know the mob6 is pushing up to 230mw on the 500mw setting. It has been tested but man the range is great on it. Either way, I don't thin you could go wrong with any of these.
Why choose this over the Tinyhawk 2?
It seems the VTX is less powerful?
It’s the same
Great Vid as always Justin but I'll stick with my TH S. She flies on rails with my custom pids and rates. The only thing is the included 25 VTX 😭😭😭
@@ValFPV I'll look into that. Thanks 🤙🏻
Just use a linear antenna and a linear patch antenna and you’ll probably get a better result. IMO.
do the props just pull right off? don't want to bust it lol
Yep. Be careful!
25mw for EU market perhaps?
I think I`ll stick with my Mobula 6. Thanks for the review, But this one is not for me!
Sorry to say that, but I can't watch a video, where I have to listen to someone talk into one ear. Mixing the two audio channels together in the editing software is not hard to do, but it's unbearable to watch especially with earphones on, if the sound is out of place like that. If you don't want to edit audio, then at least use a mono mic and put the recording it on both audio channels.
Damn bro are you on the rag?
I think I will get the TinyHawk II and switch the camera for a Caddx ANT. Then I will have a slightly more durable and more child-safe (less dangerous) quad with a greatly improved camera. In COVID-times I need some kwad to fly short times between all the meetings to not get totally mad of home office....
The benefit of TinyHawk II is that I can use my 1S 520 mAh packs that I have purchased for my FPV Cycle Babytooth.
A hint: you should definitely would need to get into contact with KababFPV, alias Bob Roogi, alias head of FPV Cycle and get a 1S 3" BabyTooth, that is a sensation.
iFlight Alpha 65, I have had nothing but trouble with mine, and under powered,
Really?! Man sorry to hear yours sucks!
for me, its gotta have flight time. 4 minutes or better
All about the NanoHawk then
No acro mode no party
I just can't get into analog footage anymore. DJI turned me into an HD video snob.
Same I’m a little like 🤨
Omg adapters for charging 🤦♂️
Yeah I’m... 👀
heh..
the shirtless review..
Wake n review!
you definitely have more dollars than sense