V3 usually has two bolts... side bolt and other bolt attached with the stem....for CBR we only have side bolts alone....is that safe to drive with only side bolts alone?
Hey brother, i want to install cbr 250 handle bar on r15v3 indo. I'm confused about the bolt customization?? Do i have to buy new bolts and then make it 38mm or use the stock one?? I'm from bangladesh. Thanks in advance 😇
Bro.front frok upper part ka diameter kaise change kia?? Sirf Coustom bolt ka diameter change karne se hoga?? Handle bar too front frok ko bhi hold karta hey....plz explain...😟😟
Instead of using cbr 250 handle bar , u can better use cbr 150 bar, which best suitable and well finish setup for v3.i have modified it properly witout any issue. After instalation i feel like i am riding bullet with sporty look and clip on handle bars.
Whoever were looking for the shop name..it is Geargear motorcycles in bangalore...unfortunately they no longer do this modification..Any one of you have alternative shops..plz mention the shop name in comments..it would be helpful for others
@@thelazygypsy7123 yes bro..even the fork size will be 41 mm knw..I have already bought cbr clip ons..but need to decide whether to bore or design a special bolt..
@@myadventures2673 I would suggest don't mess with the fork. Make the custom bolt. If at all you decide to go back to default. Then you can just switch the bolt and the handles
@@thelazygypsy7123 th-cam.com/video/hugLOnzS51s/w-d-xo.html.. Hi bro..see my video .. I made customized bolt of 70mm raise..for R15V3. No back pain. High stability.
Bro even I'm facing the back pain issues in my bike. If possible can we meet and can I take it for spin So even I'm planning to sell it if this think works out I ll not sell my bike KA-03 it's near by location to me I'm in brigade road
Ummm. It would similar to CBR 250. The posture would a little lesser than sitting upright. I just did a 615kms ride with the new handles. Previously the maximum I've done is 450kms. So it's definitely more convenient. Making another video on the same topic would get boring for the viewers.
@@thelazygypsy7123 no dude.... actually we are seeing for the required idea..and you are doing this....so, please upload more about this R15 v3 handle bar riding posture video. Abinavv from north uploading a lot about cb350 that is not boring.becoz,it's clarifying every detail in that bike.you too try this bro. Love from madurai...
Bro, thanks. I will do another video on the riding posture update for sure. And I will do a maximum long ride video as well. Thanks for the support and advise.
@@thelazygypsy7123 ya , thats the my Point . Only one thing i saw in may videos Compromising and I dont wana heart orignal part , as it b part Plug and play remove Again . ..
Hey buddy, awesome video. I also have a R15 V3 and I stay in Bengaluru. Can you please please help me with the shop address and the number of your mechanic?
Nice vid, bro! I never noticed your reg plate, you from Bangalore mate. So how close is the seating posture to an upright position? Asking for a friend. And where do you get your bg tracks from? They are amazing.
Thanks bro! :) Seating position wouldn't be a complete upright posture, but it wouldn't be as aggressive as before. It is a middle ground : A sports tourer riding posture. I usually pick these songs from my TH-cam recommendation, based on the other similar songs that I usually vibe on.
Thanks buddy. I asked the mechanics and he said it's too hard for him also to get It done. My mechanic himself, had to search a lot before he got the these done.
Can u please share the mechanic address and name in banglore so that i can also make changes and can u also share that whether u face any more vibration in this or not?
Love you brother 🔥♥️ you deserve a lot of views.... Keep uploading your experience ♥️
Thanks for the kind words
Awe man! This mod is genius! Been looking for a solution like this for my V2. Time to get down to some research. 👌🏾
Thanks a ton man.
Can you share which bolt did you took to lathe Shop?
Do one riding posture video bro all will look how much difference from the original once
Thanks for the Idea
U have done nice work bro
V3 usually has two bolts... side bolt and other bolt attached with the stem....for CBR we only have side bolts alone....is that safe to drive with only side bolts alone?
Make video on using apache rtr 200v clip ons handle bar on r15 v3
Bro R15M has same fork diameter as new cb250r .... Can I fix the new cb250r handle bars on my r15m with out boring the clip ons ? Please rply bro
Thanks brother for doing this 🙌❤️ and Can u please let us know where it can be done in bangalore .
Bro can u please post a installation video of cbr 250 handle in v3
Bro the video shows the post installation set up.
@@thelazygypsy7123 bro
You mean to say just grind stock bolt of r15 v3 or any other bolt? I mean which bolt I have to modify? Plz reply
You need to create your own bolt. Go to a lathe shop he'll help
Bolt nhi mil rha kahi mumbai me aapne khase liya?
Hey brother, i want to install cbr 250 handle bar on r15v3 indo.
I'm confused about the bolt customization??
Do i have to buy new bolts and then make it 38mm or use the stock one??
I'm from bangladesh.
Thanks in advance 😇
Just an idea - For custom bolts if I can get bolts for v3 and trim only the upper part to fit in for cbr clip ons, will it work ?
If you can trim it with such high precision
You Done a great job bro... Awesome
Thanks a ton
the wires that attach to the handle bars, are they enough after the extension ? or did you had to change the wires too ?
The wires lengths are enough. No extension needed.
Is it all set as or better than the original. 😃❤️
And what about slipper clutch
Better than original if you prefer touring.
Bro....can i use cbr handle bar for r15v2
Any idea?
Bro.front frok upper part ka diameter kaise change kia?? Sirf Coustom bolt ka diameter change karne se hoga?? Handle bar too front frok ko bhi hold karta hey....plz explain...😟😟
Don't do any changes to the fork. Just make the custom bolts and replace the stock bolts
thelazygypsy bro Custom bolts how to make 38mm fork is 41mm how to fix u told handel bars are not grinding how
Bro diameter of v4 & v3 are same?
Can you put the sample image of the bolt?
Hey can you explain more how you made the bolt
That custom bolts is available in showrooms..? And where u will done that modified bro..
No bro. You have to make them at a workshop that has lathe machine
Any idea to reduce pillon seat height ???????
Bro u said new handle bar "almost made contact with upper faring".. seems like it pushing the faring,
Does it touch the upper faring?
Yes it does. When you turn to the extreme ends.
Instead of using cbr 250 handle bar , u can better use cbr 150 bar, which best suitable and well finish setup for v3.i have modified it properly witout any issue. After instalation i feel like i am riding bullet with sporty look and clip on handle bars.
That's nice.
Can you share the information?
@@thelazygypsy7123 sure i will share the video link please wait.
Bro can you share me the video ?
@@AdventureMafia1 pls share the video and share the dimensions as well is it 41 mm
Keya aap handle bar kholke total fact samja ke ek video bana sakte Hain....... plz.plz.plz....
Plz.... make a another video on your handle bar raiser....it's very helpful for r15 v3 lovers ......plz plz plz plz...😰😰
Will do bro.
How much cost of handel and installation?
Ab handling kaisi h...??
It's good bro
Thank u bro, one question the bolt u mentioned where can i get it
You have build the bolt. You have to go to a lathe shop and get it built based on the dimensions I mentioned.
Nice presentation bro😊🤟
I love your video
Thanks bro. :)
Bro , how is your riding experience with the new handle bar, stability,control , seating etc?
All of it is good. I'll do an other video regarding the same.
Whoever were looking for the shop name..it is Geargear motorcycles in bangalore...unfortunately they no longer do this modification..Any one of you have alternative shops..plz mention the shop name in comments..it would be helpful for others
How to buy the handlebars and its price
Photo of custom nut can you provide..
Can i also get...same nut like uh got?...help
Where do we get these bolts brother...?
Which bike custom bolt..??? U use..
I know i want to trimmed the bolt..but which bike bolt u use...
Bro bolt ok...but the stumb diameter ???
It should be the same as before
Hi, Is there any vibrations with these ?
There is slight vibration on sudden bumps
Can we use gixersf or rs 200 handles ??.
Not sure bro
Will the shaft reduces the size automatically to fit the 37mm handle bar?
which shaft are you talking about? Are tou taking about the bike's front fork?
@@thelazygypsy7123 yes bro..even the fork size will be 41 mm knw..I have already bought cbr clip ons..but need to decide whether to bore or design a special bolt..
@@myadventures2673 I would suggest don't mess with the fork. Make the custom bolt. If at all you decide to go back to default. Then you can just switch the bolt and the handles
@@thelazygypsy7123 th-cam.com/video/hugLOnzS51s/w-d-xo.html.. Hi bro..see my video .. I made customized bolt of 70mm raise..for R15V3. No back pain. High stability.
Wats the price for this brother?
Is it comfortable now ? Does it reduces neck pain etc?
Absolutely. I just a 615kms ride with off roading, ghat roads and highways.
th-cam.com/video/odp7asp1rGM/w-d-xo.html
Check out.
@@thelazygypsy7123 amazing man I'm planning to do same Modification on my v3
Go for it. You will no regret it.
Supper bro
Bro, does rtr 200 4v handlebar supports on v3 ??
I don't know bro
Can we do the diameter of stock bolt to 38 mm? Is it possible
I doubt it bro
@@thelazygypsy7123 ok can u share the size of customized bolt like lenght of 38 mm & 42 mm and thread lenght
Hello bro. Could you please send two customised bolts?
I need bolts can u please help ? 🥺
The video was very helpful. I just want to know where you have done the modification, i mean which city
This was done in Bangalore buddy.
Bro can we do this in R15s. V2 model?
I'm not sure bro.
thelazygypsy bro bold how to make
You have to go to a lathe shop and get it done bro
Bro can you share the Google maps location link for the shop???? Two Gears Gears motorcycle shop is showing up in maps.
The one in Wilson garden
Bro , Can you make these bolts and send ? I will pay you the Money !!
Sorry buddy. I don't have access to the lathe guy
@@thelazygypsy7123 Bro , plz help me out
My mechanic did it for me
Bro even I'm facing the back pain issues in my bike. If possible can we meet and can I take it for spin
So even I'm planning to sell it if this think works out I ll not sell my bike
KA-03 it's near by location to me
I'm in brigade road
The riding posture is same as a cbr 250. I hope that helps.
@@thelazygypsy7123 it would be help full . When we meet
can u do a video on the riding posture
Ummm. It would similar to CBR 250.
The posture would a little lesser than sitting upright.
I just did a 615kms ride with the new handles. Previously the maximum I've done is 450kms. So it's definitely more convenient.
Making another video on the same topic would get boring for the viewers.
@@thelazygypsy7123 no dude.... actually we are seeing for the required idea..and you are doing this....so, please upload more about this R15 v3 handle bar riding posture video.
Abinavv from north uploading a lot about cb350 that is not boring.becoz,it's clarifying every detail in that bike.you too try this bro.
Love from madurai...
Bro, thanks. I will do another video on the riding posture update for sure. And I will do a maximum long ride video as well.
Thanks for the support and advise.
@@thelazygypsy7123 peace👍✌️
Bro how much did lathe work cost there?
1500 I guess, I can't remember. It's been a while.
Could you watch the video till the end. I have mentioned the cost details in the end.
Bro,which material is your new bolt ?
Stainless steel
@@thelazygypsy7123 but,stock is aluminium right?
Did you cut the Fearing
No bro
I should to make it move easier, but I don't wanna ruin the looks.
@@thelazygypsy7123 ya , thats the my Point . Only one thing i saw in may videos Compromising and I dont wana heart orignal part , as it b part Plug and play remove Again . ..
Hii bro where did u modify ur handle I also stay in Bangalore so if u give me the address and how much did it cost for all?
I got it done at gear gear motorcycle
Upper bolt size is 41mm and we should make it as 38 right?
The bolt head must be 38mm as the cbr handle is 38mm. The base of the bolt must have threads as the default botl
@@thelazygypsy7123 bro that handle holes length?how much must be
@@yeshwanthtej6357 bro take the default bolt and tell him to make the same, the only difference that the head size should be 38mm
@@thelazygypsy7123 iam asking holes on handle bro means buttons where should be placed
That handle bars have bro
Hey buddy, awesome video. I also have a R15 V3 and I stay in Bengaluru. Can you please please help me with the shop address and the number of your mechanic?
Nice vid, bro! I never noticed your reg plate, you from Bangalore mate.
So how close is the seating posture to an upright position? Asking for a friend.
And where do you get your bg tracks from? They are amazing.
Thanks bro! :)
Seating position wouldn't be a complete upright posture, but it wouldn't be as aggressive as before. It is a middle ground : A sports tourer riding posture.
I usually pick these songs from my TH-cam recommendation, based on the other similar songs that I usually vibe on.
@@thelazygypsy7123 thanks man! And please share a couple of tracks that you vibe on! I need it especially on weekdays. 😁
@@nomadicsoul definitely bro.
Very nice mod bro....jz need a help. Can ur mechanic source bolts for me?? I cant find a shop near me which can do that, it will be very helpful
Thanks buddy.
I asked the mechanics and he said it's too hard for him also to get It done. My mechanic himself, had to search a lot before he got the these done.
@@thelazygypsy7123 okk. Thanx fr trying🙂
I need Dimensions of bolt bro
Bro can i get that bolt our my near place not any leath shop
I'm not sure if you'll get the screw of those exact dimensions bro. I got it custom made.
Bro who to graind the bolt show on video
Bro sorry, that is done in a lathe shop. And my mechanic did it for me.
What about cornering confidence
Good question bro. It's pretty good actually. I have made another video explaining the cornering confidence.
@@thelazygypsy7123 ok bro thanks for the replay
Where you done this bro...
Gear gear motorcycle
I want to buy threaded piece of cbr 250
For r15 v3 handle can u help me
Its not ready made. You have to custom make it.
i have it if u want dm me on instagram __yash_kadam__
@@yashkadam414 can u help me in getting it
where did you get that customize bolts ? bro
My mechanic got it done for me .
Can u pls help us with contact number so we can get delivery of bolts
Gear gear motorcycle
@@thelazygypsy7123 bro location please i want to also change my v3 handle bar
Bruh 's ! Can somebody provide me the link? So I can also buy.
I have same full set with cbr handle bar and customized bolts l, i did it for my r15 v3 now i sold bike but i have these set if u want i can give u
Which bike handel bar fitting
Cbr 250r
@@thelazygypsy7123 online purchase kia
No. Went to honda sales and service centre.
@@thelazygypsy7123 ok
Bro can you please tell me the total cost
Ummm, it's in in the end of the video bro. I don't remember exactly.
Bro whts the price of the cbr handle
I'm assuming you haven't seen the video till the end. 😛 1500₹
And what about warranty?
Im not sure
Bhai English zaruri thori tha hindi mei bana deta bdw nice information
Bro. I am south Indian. Mera hindi accha nahi hai.
Can u please share the mechanic address and name in banglore so that i can also make changes and can u also share that whether u face any more vibration in this or not?
Font visor cut ??
I haven't cut it bro.
Bhai achha laga muje b ye wala handlebar lagvana aapka number please
Instagram dm bro
Bro i need that bold,and i am from Tamilnadu plz send the bold in courier,i will send a money before it,,,help me bro
I'm sorry bro. I don't have such easy access to the lathe machines.
@@thelazygypsy7123 same bro please send me also ....I will send you money please help 🙏
Bro shop address bro
Gear gear motorcycle
Bro who to buy bolt
You have to custom make it.
Handlebar price???
👆
I'm assuming you haven't watched to the end.🤣 1.5k 😊
How much it cost for handle bar from honda?
I'm guessing you didn't watch the full video. 🤣 1500₹.
Can u send me those bolt...plz...ill pay for it.
Sorry bro, my mechanic did it for me
Bro give the address of the mechanic.
Gear gear motorcycle
Bro,mechanic contact number please?
I don't have the number bro. You can google gear gear motorcycle, Wilson garden
Anyone need this full set cbr handlebar and customised bolts for r15 contact me, only one set available
Bro please help.. send these bolts in courier I will send you money please....I am from Maharashtra...🙏
Sorry buddy. Find a lathe shop near you and get it done. Its not as hard as it looks.
@@thelazygypsy7123 bhai courier charges bhi dunga aur aapko kuch extra bhi pay karunga please yaar batado kitne bheju.... Me chotese gaon me rahta hu yaha puchke dekha mene ...wo nahi kr sakte bole🙄
@@rahulude99 bro if u want these handels plus bolt message me on insta __yash_kadam__
@@yashkadam414 aap kaha se ho.?
Kisiko yea handle bar chahiye toh mujhe contact kare
Bro Tamil ah explain panunga plz
I'm sorry bro. I don't know to speak Tamil.
you can speak hindi if you r not comfortable 😂
I'm a South Indian and my mother tongue is kannada bro. My Hindi is not good
@@thelazygypsy7123 ohhh then its ok bro keep it up👍👍👍
@@thelazygypsy7123 ಕನ್ನಡ ♥️💛
Mata to do Hindi mein nahin bol beta 😀
Sir wats ap no mil skta h apka
You can dm me on instagram. Id : thelazygypsy
Hi Brother, can I get your Instagram ID. Had few doubts, thought to discuss it with you.