The technique of taping the blank back together after each bandsaw cut is new to me. It is a great way to maintain control. I can apply that lesson learned for many jobs. Thanks for that. I hope to build my own spokeshave as well.
Your work is amazing, I find you to be among the most resourceful people that I have had the pleasure to observe. The tools that I have watched you build inspire me to stay dedicated to the path that at times, I felt to be beyond my reach financially. You have shown me that having the willingness to work through percieved limitations can yield absolutely amazing results. Thank you for the generosity that sharing your skill with the rest of us demonstrates. Be well.
Nice!!! that was the first plane I bought, and quickly learned a lot about "tuning" a plane, you did a lot with a little to start with as usual. Beautiful work!
Incredible, I bought one of those Harbor Fright planes and I think it's presently collecting dust on a shelf in the shop... either that or it holds my shop door open from time to time. Might have to give it new life based on this video !!!
I really enjoyed watching this video. You have created a very nice tool. It works well and looks great -- and I'll bet it comes to the hand beautifully, too. Impressive! Thanks for posting the video.
Congratulations!!. I think is a very well crafted spokeshave. I loved it And I might replace the steel plate for a Brass piece and dovetail it inside the two block. Also, I have a few pieces of Burmese Teak to get it done.
This is a Masters Tool that any Real man would be proud to hold. What is funny is that the plane you used as its doner is Probably the biggest trashed talked tool on the web. I picked up one knowing it needed work and when squared and had sole flattened then made a shim to tighten the mouth ,its one fine tool. It will never be the quality of a Vertas but for roughing in a piece of ash or white oak its my go to plane. But you took the thing to an extreme level.
Absolutely beautifully handcrafted and fit your hands perfectly! Excellent shavings also. Now that you have made several hand tools and jigs, will you be making a piece of furniture?
Amazing work. Also, watching how the final product shaved onionskin-like shaving from wood was a special experience, however, about half way through, I found myself thinking, "God, why not just buy the damned thing."
That's one large spokeshave! Two questions: 1. What are the finished dimensions, e.g. length of handles (end to end), the length/depth of the sole? 2. What brand or who makes the small spokeshave that you used to shape the handle?
i belive buying only a replacement blade for stanley sb3 or sb4 or an actual spokeshave would be better idea than geting quesyionable quality plane and making something else out of it and if you already have the whole thing, why not just cut the iron casting and add handles ona long threaded rod?
Раньше простыми инструментами делали сложные. Теперь наоборот - относительно простой инструмент сделан с помощью большого набора дорогостоящего оборудования. Красивый регресс.
The technique of taping the blank back together after each bandsaw cut is new to me. It is a great way to maintain control. I can apply that lesson learned for many jobs. Thanks for that. I hope to build my own spokeshave as well.
You do such exquisite work. One day, I hope to be half as skillful as you are. Thanks for sharing. Thanks for not adding annoying music to the video!👍
Your work is amazing, I find you to be among the most resourceful people that I have had the pleasure to observe. The tools that I have watched you build inspire me to stay dedicated to the path that at times, I felt to be beyond my reach financially. You have shown me that having the willingness to work through percieved limitations can yield absolutely amazing results. Thank you for the generosity that sharing your skill with the rest of us demonstrates. Be well.
A nice rasp would work beautifully for those handles , it came out awesome!! Great video !!!!
Incredible workmanship. Watching your build videos is a pleasure.
Thank you~
Your skill and craftsmanship never fail to amaze me. Thanks for sharing.
Everything is gorgeous! Thank you for these videos. Need to binge them all.
Nice!!! that was the first plane I bought, and quickly learned a lot about "tuning" a plane, you did a lot with a little to start with as usual. Beautiful work!
Incredible, I bought one of those Harbor Fright planes and I think it's presently collecting dust on a shelf in the shop... either that or it holds my shop door open from time to time. Might have to give it new life based on this video !!!
You, Sir, are a true master. I really enjoy watching you work.
amazingly nice, great shavings too....I can practically see through them and the seem like they are not split or anything....simply beautiful.
You are a true master to quality hand tools mate and with another addition like this spoke shave, i envy your knowledge.. beautiful work young je
Awesome craftsmanship. I love those fine shavings, superb!
yet another fine work of a tool. Like I have said before Mr. Je you do beautiful work.
Beautiful job and beautiful spokeshave!
Thank you~
I really enjoyed watching this video.
You have created a very nice tool. It works well and looks great -- and I'll bet it comes to the hand beautifully, too. Impressive!
Thanks for posting the video.
Thank you~
Wow. This is Awesome Skills. Precision,Control,Creativity and above all god given talent.
A pleasure to watch as always. I love these build videos. keep them coming brother.
Superb tool.You are a true craftsman.
a true master of your craft you can and should feel honor sir I am humbled to watch your work thank you so much
Thanks~
beautiful spokeshave!
greetings from the Netherlands!
Oh wow! Amazing craftmanship
Beautifully done. ThNk you for sharing it.
Thanks~
Wonderful work, i'm aways amazed by your incredibe creations!
Thank you!
Thanks for sharing, excellent vid, I really like the way you do your jobs
Great work as always Young Je!
true craftsmanship,well done sir.
Congratulations!!. I think is a very well crafted spokeshave. I loved it And I might replace the steel plate for a Brass piece and dovetail it inside the two block. Also, I have a few pieces of Burmese Teak to get it done.
Awesome job! Look at those shavings!!! Thanks for sharing :D
Thanks~
wasn't sure about how this would be worth the effort, but boy was i wrong, beautiful job and an excellent plane
What an amazing build. Just subscribed and enjoying every moment of watching a true craftsman work.
That is a really big spokeshave but it's beautiful and works beautifully.
Very inspiring video. Beautiful piece.
Thank you~
That was amazing! You just blew my mind!
Perfect craftsmanship, great design, and as a hand plane enthusiast the shavings speak to the precision of your work. You sir are inspiring.
Thank you~
Excellent. I only see one problem. Will the epoxy hold?
Mcgyver's Wood Shop & Adventures 了
elan really and he uses a smal spoke shave to make this one
Nice Job!
excellent work as usual.
Very complicated, well done!
This is a Masters Tool that any Real man would be proud to hold. What is funny is that the plane you used as its doner is Probably the biggest trashed talked tool on the web. I picked up one knowing it needed work and when squared and had sole flattened then made a shim to tighten the mouth ,its one fine tool. It will never be the quality of a Vertas but for roughing in a piece of ash or white oak its my go to plane. But you took the thing to an extreme level.
Absolutely beautifully handcrafted and fit your hands perfectly! Excellent shavings also.
Now that you have made several hand tools and jigs, will you be making a piece of furniture?
I do not have enough room for my house because I made too much furniture.
Thank you~
Great craftsmanship and the result speaks for itself. Can I ask when you sharpen what is your final grit count stone?
# 8000~
Very inspiring and excellent craftsmanship
Thank you~
so ein Schweifhobel wollte ich mir schon lange bauen Danke für deine erstklassige Lösung
Daumen hoch
Great Project
Very Nice!! Good craftsmanship
Огромное уважение мастеру!
Well done!!!
As always, beautiful.
Gorgeous!
Amazing beautiful work
This is amazing! Do you sell these or the plans??
Amazing work. Also, watching how the final product shaved onionskin-like shaving from wood was a special experience, however, about half way through, I found myself thinking, "God, why not just buy the damned thing."
8:34 is simply brilliant technique...
Nice job , please would you tell us how to make like your grinder arm ☺️
You make me smile!
That's one large spokeshave! Two questions: 1. What are the finished dimensions, e.g. length of handles (end to end), the length/depth of the sole? 2. What brand or who makes the small spokeshave that you used to shape the handle?
14 (L) X 1 3/4 (D)
Vintage stanley no 52
Wow! Absolutely beautiful
thanks,
Круто! Спасибо за видео. Дело мастера боится.
Very nice. Very Very nice tool! From 7 bucks to 150 bucks+
Pull and push? hows it fell on a pull ?
So that's where chow fun comes from! Seriously though, incredible
Great job! Do you ever make anything besides jigs and tool? I'd like to see them. Harbor Freight is your friend and mine also.
Very beautiful! If I may ask, how many hours did it take you, in total, including glue-drying time?
Wow! Very nice.
excellent job
Magical. Thank you.
Cool vid. I wonder what the melody is.
great work!
very awesome!!!
작업 올리신 것들 보고 감동받았습니다.
감사합니다~^^
The only plane I have is even cheaper than that $7 plane. Thanks for sharing !
정말 대단하십니다! 그리고 진정한 국위선양 하고 계시네요! 미국 어느 주에 계신가요?
일리노이 주에서 서식합니다~ㅎ
this sound smooth cutting sound is glory for a wood worker devote.
I want to do stuff liked this when my shed is set up.
Amazing! Think you!
Another masterpiece!
what great skills - you are amazing
EXCELLENT, PERFECT. CONGRATULATIONS. FROM BRAZIL, MY FRIEND.
Nice job mate!
thank you
Well now I am going to drop some money at harbor freight for that plane... this was wonderful.
good luck~
Incredible!
Thank you~
Excellent!!
When can I start offering to buy the tools you keep making?
Very well done.
Thanks~
пипец лайк!
i belive buying only a replacement blade for stanley sb3 or sb4 or an actual spokeshave would be better idea than geting quesyionable quality plane and making something else out of it
and if you already have the whole thing, why not just cut the iron casting and add handles ona long threaded rod?
Parabéns pelo trabalho.... espetacular....
Very powerful.
Excellent...!
Cheers...
beautifully done sir... as always. So do you do woodworking for hobby or are you a fulltime artisan woodworker?
I am fulltime artisan woodworker,
Thank you~
Ever spokeshaved a spokeshave?
he is real wood master. the knife is important for sharp
what wood it that? it was born to be shaved
Very awesome !!
A masterpiece!
Install fuel tanks on that mileage will increse
I love it...
one strange detail... you need a spoke shave to make a spoke share. I very much like the idea I just dont have the first spoke shave to make this one.
Nice job.
Thanks~
Why was this to be done? Do you want to scratch your right ear with your left foot?
muito bom, ver esses vídeos passo a passo parabéns.
Раньше простыми инструментами делали сложные. Теперь наоборот - относительно простой инструмент сделан с помощью большого набора дорогостоящего оборудования. Красивый регресс.
Professional!