Aluminium to Copper brazing
ฝัง
- เผยแพร่เมื่อ 5 พ.ย. 2006
- this video shows how to join aluminium tubes to copper tubes also al tubes to eachother with ZnAl brazing alloy and ForteBraze 040 flux. for more information visit www.fortebraze.com or contact info@fortebraze.com
- แนวปฏิบัติและการใช้ชีวิต
Very informative video. Now I know all I need is to mix some baking soda in some water for flux and braze with a clothes hanger. THANKS
Flows very well,
Manufacturer is ForteBraze and the flux name is 040.
Alloy composition used is ZnAl4 (Al: 4%, Zn: rest) wire.
For contact details please refer to the explenation on the right of the video.
Hocam eğitici bir video elinze sağlık
The Oweld flame's temperature is about 3600 degrees. You don't melt the alluminum because you go more fast. Thanks to this temperature the alloy goes deeper and the joints are more stronger. Moreover with Oweld gas generators you don't spend costs of gas any more and you will have a safe workplace (without risks of explosion, monoxide of carbon...).
How much pressure can the joint handle?
Will it hold up to the new 410 pressures for air conditioners?
Bu kalınlıktaki Aluminyum boruları birbirine veya Alumninyum - Bakır birleştirilmesinde, özellikle buzdolabı üretiminde bir sorun yaşanmadan rahatlıkla kullanılıyor. Başka Aluminyum birleştirmelerinde diğer sert-lehim metodları kullanılabilir.
Burada kullanılan ZnAl4 alaşımı ile 450 °C'de işlem gerçekleşiyor, daha sık kullanılan AlSi12 alaşımıyla yapılan sert-lehim işlemi isie 560 °C'de.
I want to ask compounds with aluminum brazing ???????
tell me the flux mixture you used
@OTOPUN ahi dice 040 mezclado con agua. supongo qe sera agua destilada.
Sir what is White past
#8staybrite works just as good.
Clean piping with a brass brush/ never use sandcloth on aluminum
What temperature you braze with, type of gas. type of flux I should have asked. would that hold up in refrigeration
Forteflux 040 brazing flux is mixed with pure water. 20-25% pure water is added on a balance.
@cagrigurbuz tap water?
@error204 pure, distilled or demineralized water
Oweld machines generates Hydrogen and Oxygen with electrolysis of water. Can be used, but due to Hydrogen flame has very high temperatures, there is a possibility to melt aluminium. Use of wide and soft flame is advised in this application, like propane.
Nice Turks. keep it up :)
Peki genel olarak soyle bir soru sorsam aliminyum parcaları birbirine lehim etmede en uygun yontem hangisi. Torch brazing mi yoksa baska bir metod mu? neden veya neden degil? tesekkurler. bu arada ben de cukurova makina muh. ogrencisi ya sen.
پودر چیه ک با آب قاطی میکنه قبل جوشکاری ب لوله ها میزنه
merhaba aluminyum kaynağı ile ilgili fikir alışverişinde bulunmak isterim
flux is 040 mixed with water
Beyler bari aliminyumun daha profesyonelce yapılan bir lehimini gosterseydiniz. Sizce aliminyumu lehim etmede en uygun yontem Torch brazing mi? Bence aliminyumun ic yapısı falan bayagı bozuluyor.
what kind of flux are you using?
How to sander copper
Split AC के outdoor unit के aluminium condenser pipe और coper paip के जोड़ के लीकेज को ,बिना गैस निकाले और बिना bilding के, किस प्रकार जोड़े की , वहाँ पर का गैस लीकेज हमेशा के लिये बन्द हो जाये ।
It looks like you are SOLDERING using the brazing flux.
huh?
thats not brazing..its just soldering..yes both are close to the same thing, but if you use solder then its soldering..lol still a good video but a little missleading. the two main differances between the twoo are 1. temp, (solder melts at a really low temp, almost like lead, in fact you can solder with lead as well) 2. when soldering all you have to do is touch one place on the pipe and it will flow all the way around the pipe "soldering it" with brazing you have to slowly work it around.
oil should be cleaned before brazing.
¿english?
that is iraqy :)) not turks. but iven iraqy's not iraq'i :D