On the Vsett 10+ I also found when driving off-road or gravel, that got more traction in single motor mode and P12 throttle response best in the middle, otherwise can slide about a bit.
Thanks for making these about the Vsett line, I own a 10+ for a few months now and didn’t know about the settings you showed! Real crap that the UK has such restrictions for PEV’s! Overe here in the states I only get cops admiring even asking me about it! There’s no helmet law in Michigan where I am but I always wear my gear as if you don’t own a Vsett, especially the more powerful ones you can get in a bad way quick so all be safe! And cheers to you for great videos, keep it up!
Your welcome Scott thanks for your support. I do love the Vsett 10 its just so capable which for me is needed as i cant legally ride it on public roads. I always envious of all vids i see of these being ridden in some stunning locations around the globe.
@@MrExprise And the other gears don't match your city's limits? Doesn't the law state that the scooter can't have the ability to go over the stated limit? I ask because we are only allowed 20 kph here in Denmark, and I don't want my scooter impounded. Can you set the maximum speed to 20 kph in P settings?
The maximum power for sure. I need to set it to about 44-47% to get about 25-27 km/h top speed (as some sort of software speed limit) The issue by doing it this way... it loses nearly all its acceleration and torque for uphill, rendering the scooter useless.
Hi, i have a question in some e-bikes or scooters order to change p settings you need to enter a password first where is this password is stored ? in the display throttle or inside the controller i mean if i have my p-settings locked and i will replace the display (qs-s4) will it help or the password stored inside the controller TIA
Lmao a friend put there vsett setting acceleration p setting to edit 5. They're noobs and accident put there pinky finger on the throttle end, the vsett spun around into a helicopter and went through a shop window on its own🤦♂️
For VSETT 10+ I have left P07 on default which manual has at 28 and I have changed wheel diameter P06 to 8.8 to get accurate speed displayed, checked with GPS.
@@stephenhartley3292 that could work too, but in real theres 30 magnets in the motor, as i heard from whos counted them. Setting wheel diameter to 8.8, could cause in odo range misscalculation, need to test for it
On the Vsett 10+ I also found when driving off-road or gravel, that got more traction in single motor mode and P12 throttle response best in the middle, otherwise can slide about a bit.
Thanks for making these about the Vsett line, I own a 10+ for a few months now and didn’t know about the settings you showed! Real crap that the UK has such restrictions for PEV’s! Overe here in the states I only get cops admiring even asking me about it! There’s no helmet law in Michigan where I am but I always wear my gear as if you don’t own a Vsett, especially the more powerful ones you can get in a bad way quick so all be safe! And cheers to you for great videos, keep it up!
Your welcome Scott thanks for your support. I do love the Vsett 10 its just so capable which for me is needed as i cant legally ride it on public roads. I always envious of all vids i see of these being ridden in some stunning locations around the globe.
Thanks. I read the manual but wasn’t understanding some of the stuff.
Just got my Vsett 10+ today big help thanks
Is there any phone app for the vsett 8 plus?thanks
Hi there was wondering if you could help wondering what setting I should go to so I no if battery dieing
Thanks for the tips. The audio was a bit muffled on my end so hard to understand.
If the speed limiter if removed is there a way I can apply a limit in the P settings?
Can the 'gears' be changed?
Can’t remember which ones but there is a power one that goes 0-100
@@cluaxa1712 yes found it!
Thanks. By trial and error I managed to limit it so one gear matches my city's limits
@@MrExprise And the other gears don't match your city's limits?
Doesn't the law state that the scooter can't have the ability to go over the stated limit?
I ask because we are only allowed 20 kph here in Denmark, and I don't want my scooter impounded.
Can you set the maximum speed to 20 kph in P settings?
I got a vsett display for my zero 9 what settings should I put to match my zero 9?
Do the p settings affect top speed at all?
The maximum power for sure. I need to set it to about 44-47% to get about 25-27 km/h top speed (as some sort of software speed limit)
The issue by doing it this way... it loses nearly all its acceleration and torque for uphill, rendering the scooter useless.
Can you tell me how to turn the headlight on I've followed instructions but it hasn't worked. Cheers
I think its hold down + for 3 sec. If not its the - for sure. Do same to negate.
I'm wiring my throttle on my c-1 also have a 007 fault
On vsett8 p15 at what should IT be kept
Good job Alan.. instructive !😉👍
Thanks 👍 buddy, think i done this one to remind me also as i'm always forgetting when i'm out and about 😂
😂👍
Hi, i have a question
in some e-bikes or scooters order to change p settings you need to enter a password first
where is this password is stored ? in the display throttle or inside the controller
i mean if i have my p-settings locked and i will replace the display (qs-s4) will it help or the password stored inside the controller
TIA
I can not unlock the on-board computer after nfc settings. What to do?
Very useful, thanks!
Hi Alan.. hope you are well? Please and what about the P15? I don’t understand it’s usefulness ? 😉 thank you
P15 is to do with th voltage the controller shut down. mine are set at 50v
Good evening Alan . That is exactly what I understood.
But Mine are set at 52v however my scoot still work and contrôler Still work under 52v
Thank
Sorry for my bad English .. it is very difficult for me to explain it with the right words
@@fabianc1650 just use translate
Sir question, E10 lcd not turning on, lights are working. How to fix it sir?
How do I change it to miles per hour
P settings number 2, alternates between MPH and KPH
Thanks for the question you asked cause this is exactly why I can't to this channel!
👍👍
how to turn the lights on automatically each time.. that's the question:/ firmware update?
Thanks For Sharing If Only More VSETT Owners Would Stop Being Shy and Share Their VSETT WISDOM 🤪 Thx Again!
..... OG - Gone Electric ..... "OGGE"
What are the other ‘P numbers’ for?
I guess programm
Question why does your nfc reader says 58? Is that the battery or what?
That’s your voltage
@@EricMurilloProductions thank you.
How off cruise control ?
P17 turn to 0. Cruise control is a menace. Was letting go of gas in a turn then it keeps going...
I got the vsett 8 how do I make it to mph it's on kph
Hola, lo modificas en P02.
Anyone have their controller forget the p settings all the time? Its like it gets scrambled sometimes. vsett10+ here.
tanks 👌
Hello Question :
How I can delete miles, to cero?
I dont think you can
P16 ODO Zero setting: keep pressing + for 5 seconds, but I don't know why you would use this.
To try to mislead someone when selling the scooter? Shame
Lmao a friend put there vsett setting acceleration p setting to edit 5. They're noobs and accident put there pinky finger on the throttle end, the vsett spun around into a helicopter and went through a shop window on its own🤦♂️
i just want you to say the phrase "if you buy one, you get three free"
For VSETT 10+ P07 should be 30 and P06 should be 9,6. OR P07 should be 32, then measurement would be correct
For VSETT 10+ I have left P07 on default which manual has at 28 and I have changed wheel diameter P06 to 8.8 to get accurate speed displayed, checked with GPS.
What setting are you running KPH or MPH, just interested to know.
@@escootermodificationguides2149 I'm running KPH and my top speed has been about 70Kph = 43Mph measured with gps on phone
@@stephenhartley3292 that could work too, but in real theres 30 magnets in the motor, as i heard from whos counted them. Setting wheel diameter to 8.8, could cause in odo range misscalculation, need to test for it
@@stephenhartley3292 why did you change your wheel diameter to that?
No hay algún truco para más velocidad de la vsett 8?
Electronic braking is garbage....fractured damn wrist trying to brake quickly on my sidewalk smdh lol anywho it's turned of now
so it works then:D