วีดีโอ

Hello my friend I have one question about adapters which one do you bought? I ordered IS 180mm front is that correct one? Thanks

I'm wiring my throttle on my c-1 also have a 007 fault

The brake disc is mounted "wrong"! Huh? 🤔Why did you mount the SNAIL brake disc the wrong way round? But it looks much better turned the other way around and that's how it should be. The stone chip protection looks nicer when it's nice and flat and silver on the disc. And if you put your finger over it, it has sharp edges and I don't really like that. PS: But I really like your VSETT 10+ in gray/white or white! It's very nice in this color! 👍

I really like the grey colour of the VSETT 10+!

What it hard to take apart and put back together?

Hello can you tell me what tyres you have on the scooter, I'm looking to replace mine. Thanks.

Hi there was wondering if you could help wondering what setting I should go to so I no if battery dieing

Hello, after you have loosened all the screws, use the hammer, but only minimally. then you simply pull off the right side (in the video). Do you have a hint for me? It doesn't work for me. I've already tried a few things, it just gets stuck and can't be loosened with one hand like you did.

My Vsett 8 mudguard doesnt protect from flying mud and water to my back, do you have any ideas how to fix it?

Hi! Thanks for videos. I am waiting for the delivery of my vsett10. Do you think it is possible to put a 150 mm airshock absorber in front?

What are the risks of a disk brake rotor installed in the opposite direction?

I did this to my Mukuta 10 plus and it's way better. Went a tiny bit wider.

what size are your rotors?

Do the p settings affect top speed at all?

For those that don’t know about pressure for these air shocks, you’ll need to find your comfort spot in air. He is a 200lbs rider so you could use those settings for air pressure then dialing them back to find your ride comfort. I’m a lightweight rider about 140lbs and I have my settings set at 130 PSI main & 65 negative psi. To simplify this, MP (main pressure) should always be higher then NP (negative pressure) and it’s typically got to be about half of the main pressure (MP) . There is no perfect setting but depending on your weight you’ll need to start higher or lower to find your ride comfort.

update on the waterproofing ability of this method in your experience, since mine might be different - if you still use the scooter

On vsett8 p15 at what should IT be kept

You mentioned you raised your mud guard on the front. Do you have a video or can you explain how you did this? Thanks!

Hi, what is the screw size for the mudguard

I got a vsett display for my zero 9 what settings should I put to match my zero 9?

Who the fook puts music when he talks in his video

Thanks. I read the manual but wasn’t understanding some of the stuff.

Do you have a link to the titanium bolts please

Is there any phone app for the vsett 8 plus?thanks

I have 6 pcs Rockshox Monarch RL 165mm but if I put this and lower the pressure and adjust the reboun can I get a better result?! instead of a measly 125mm🙄

absurd to design such an expensive scooter with a ridiculous 125mm suspension !! I keep my blade with 165mm suspension

it possibile mount 165mm front?

Question... if I add the larger rotor on the back wheel will changing the caliper mount result in the caliper touching the stock fender?

What rise are the new bars how does the height compare to the originals ?

This looks like a Rotor upgrade not the actual brakes. Thought you might be upgrading the brakes to Shimano or Magura, that would be awesome.

I really like your wording with this video with your testimony. I have 10" heel scooter as well i wanted to know if 180mm was pushing it? My tires are 80/65 u have any opinions

Hello i whant to upgrade my electric scooter im with 160mm brake disk and i whant to replace it with 180mm but i need adaptor. My question is what adaptor i have to buy so i can put a 180mm brake disk. Can you tell me my scouter is Blade GT

Good looking colors. I can’t stand the yellow. Yours looks sick

Poor quality work. There is a headlight on the front fender and if it is THAT is how it is raised, then it will blind all oncoming pedestrians and drivers. Raise the front fender ON 4 WASHERS (one washer for each bolt). Only then the direction of the headlight will not change. And there is no point in raising the rear wing at all, on VSETT 10+ there are no problems with it.

What kind of tire is that as well?

Nice

Bonjour quel est le diamètre des nouveaux disques s'il vous plaît ? merci .

Those colors are so freshhh

That is first thing I did on Vsett 8 att rear bumper is litle noisy and after that it's silent.

Hi how are u? nice video....can u say me What damper did you install? the 125mm or the 150mm?

Great video. Juts one question: Is there a version without the background music? I cannot really hear what you say from the music. Many thanks

Thanks. After seeing the other video I just decided to make inspecting them something I do every 800 km or so, and this video helped me look at the locking nuts too. Absolutely no problems at 800 km.

My air shock on the front just burst at 40mph, Scary

No hay algún truco para más velocidad de la vsett 8?

Please tell me where you guys get replacement bolts for the Vsett? I lost the split hub black bolts, anyone know the size of these things and where can I find replacement bolts..????HELPPPPP !

Are the bar ends 22.2 or 22.0 mm? And the stem 31.? 32.? Help not sure what I need..EDIT any links to that bar please?

Of all the TH-cam channels that pertain to electric scooters, you have the very best looking scooter of all. Keep up the good work and keep it coming.😎🙏🇺🇸🇨🇦

Hi, I cannot find a link to the handlebar?

Just got my Vsett 10+ today big help thanks

The yellow on the tires- did you do that witha paint pen?