Hendrickson Rear Suspension | Walking Beam Bushing Replacement
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Thanks For Watching!!! Please Like And Subscribe.
Please check out semiworkin.com
Hendrickson suspension rear walking beam removal, rebush, and reinstall.
Please check out my other videos: / @semiworkin
Check out some Semi Workin apparel: teespring.com/...
Parts Used:
Center Bushing: amzn.to/3mJ589W
End Bushings: amzn.to/3aAfK8Q
Tools Used:
1/2" Air Impact Wrench: amzn.to/2M1bV2l
3/4" Air Impact Wrench: amzn.to/3nW2ZcN
Pneumatic Bottle Jacks: amzn.to/3nKxyBR
As an Amazon Associate I earn from qualifying purchases.
Everything this man does is for a specific reason very talented
Is it me, or does this look fun and kinda relaxing to do
If you want to see a difficult one, watch my video coming out on Friday July 23rd on the old style walking beam bushings. It did not go well.
@@simcoespring yeah the oem ones that don't move are a pain the the bracket not the washers
Worked at spring shop many years ago where we did several of these jobs a week. I always tried to be busy doing something else. Heavy, dirty work. The shop went through air tools and impact sockets like crazy. Too bad he didn't show the press used to remove and install the bushings...its massive.
Isn't that what is around the 8 minute mark?
Very interesting to see the process of this repair, thanks for sharing.
another quality job brought to you by semi workin.
Got to love walking beam....best off road suspension in my opinion...mabey not the smoothest ride but hey its a water truck
Thanks for watching!!
That takes me back when number 1 tool in my box was a big hammer and number 2 tool was a bigger hammer 😂
Thanks for watching!! Got to have a BFH!!
no 1 tool hot wrench no2 bfh haha
So glad I found this video have exact same suspension needs same job done
This video was very inspiring. Great work
Thanks for watching!!
I’ve done so many of these it made me tired just watching!😉
Dang you make it look easy! Will be replacing mine this winter I’m hoping it’ll be as easy as you make it look haha
Thanks for watching!!
@@SemiWorkin )767
GREAT VIDEO.......THANK YOU FOR POSTING...
If those beam bushings were that bad I guarantee the tower bushings are shot too ! Nice job thanks for sharing!👍
Thanks for watching!!
I use to run a concrete mixer with the hendrickson suspention. Very stable. The dumptruck i ran had the walking beam with the springs.
Also very nice. The best part of a walking beam suspension is one less air leak to find. Dual lockers a must.
Thanks for watching and commenting!! Good set up and low maintenance.
@@SemiWorkin I like working on walking beams theres just a little weight to them aha. I work under a pit. Awesome video!
Is this suspension softer than a mack camelback suspension?
This guy is that good his optimus primes doctor!!!!
Thanks for watching!!
Friend I am a new subscriber and Although I know you do not speak in the videos I want you to know that I love your videos very Especially the videos of the suspensions of the trucks Many congratulations
Nice job . Looks heavy work 👍👍
Thanks for watching!!
Worse than the walking beam suspension system are the leaf spring or massive coil spring suspensions. The work then becomes deadly in some cases. Had a coil spring jump from its hold down clamps and penetrate the shop wall about 12 feet away. All in about two seconds. I was trained to NEVER expose any body part to a spring under tension. That advise paid off.
Boa noite daqui de Portugal gostei do seu vídeo parabéns muito profissional obrigado Hélder Henoch
I wish you was nearby, my 96 Peterbilt tandem dump truck need walking beam bushings replaced and most mechanics where I live don't have a clue what they're doing.
Отличная работа профессионала. Спасибо Semi.
Это не его имя
Caveman suspension. Pretty much similar to a equalizer type setup on a trailer.
Just left work uy
strong suspension better than today's weaklings
@@harjot461 strong yes, beat shit out you MMMM ruff ride mmmm
خیلی هم عالی ❤❤
the sound of the impacts soothes me for some reason.
Thanks for watching!! Sometimes it gives me a headache.
👍 good job
Hard work
Thanks for watching!!
Definitely one of those jobs where you donate a little plasma lol
Cool stuff
How did you keep the axles from moving?
Good stuff
Nothing wrong with a good old automann socket cheap yet durable
Buen trabajo desde colombia se podrian suprimir los golpes por otro tipos de herramientas
Those things were really shot. Thank goodness for a good impact wrench and a good hydraulic press. I take it you may have done that before...
Thanks for watching!! One of the worst ones I've ever seen.
@@SemiWorkin I had one where the pins were cutting into the beam ends. Welded and ground it and it drove away.
Sure wish last one I did went that easy
how many ton does this press work in? thank u nice video
I like those atros
work hard !!
Expcional!! Tiro o meu Chapeu pra vc guerreiro!.... 🤔😃😃👏👏👏👏
The cross tube that connects to both walking beams, is it supposed to move side to side?
Charm suspension system
sweet how many miles were on that
_سيّد الإستغفار:
اللهم انت ربِّي لا إلـهَ إلا انت خلقتني وانا عبدك وانا على عهدِكَ ووعدك ما استطعت ، اعوذُ بك من شرِّ ما صنعت ابوءُ لك بنعمتك علي وابوءُ بذنبي فاغفر لي فإنهُ لا يغفرُ الذنوب َإلا انت💛💫.
Парень, ты ошибся дверью, тут обсуждают гаечные ключи и методы их использования
Can we swap camelback suspension with haulmax for mack truck 46k rear .......can u do trunion stand replacement for camelback suspension using the after market GAUMER INDUSTRIES trunion stand
Why do you leave a jack under the driveline?
How did you reinstall cross tube with the open side of the center bushing facing outward?
Can you make video for all tools that you use like the press others thank u
Thanks for watching more videos to come.
good
Thanks for watching!!
Amigo de cuantas toneladas de presion es tu prensa??
i want a job like that
Thanks for watching!!
Muy buen trabajo 👌
the method behind the madness.
Hi ned to replace my bushings, would you be able to give me part numbers for bushings please .I am in the UK so could you let me know your supplier if poss. Thankyou
Thats what im talkin about
Thanks for watching!!
What ton press is needed? Thanks
Insan 100000bin Stück tanecik
Tengo taller en Colombia, a cómo cobran el cambio de los 6 bujes. Muy buen video también hacemos el mismo trabajo y también reparamos los troques traceros.
Amigo disculpe mi ignorancia como se llama ese tipo de suspensión y si se le puede adaptar a cualquier tracto Mula estoy armando un Mack r600 le agradecería si me colabora con eso soy de venezuela
хороший гайковерт
The hand truck an actual tool or did you make it???
Thanks for watching!! It’s an actual tool it’s very old and I don’t think they make them anymore.
@@SemiWorkin can you do a video of it so I can maybe find it or make 1 please thank you
It looks like a hand truck to stack feed bags like you would find at a farmers co op. It’s at an angle so the bags don’t fall while your stacking them onto it
классно!
You should talk and communicate what you are doing and why in these videos. Would be way better
What’s the torque specs for those bolts ?
With suspension as primitive as this, its no wonder American truckers like to sit in the middle between the axles.
How can we diagnose we need to change the walking beam bushing.
Thanks for watching!! Easiest way to tell is when you turn the truck the back axles move side to side.
Why you turn the nuts on and off before taking it off?
Suradan 26 milyon tane alirim
And this, ladies and gentlemen, is how real men (and women) handle real work… I doubt there are any college students today that could handle removing just one of those bolts with a 3/4 inch gun on one end with a bar and socket on the other . There would be nothing but whining and tears. ‘It’s too hot…it’s too dirty…there isn’t a Starbucks close by!’ WTF…
I always hated doing the puck ones. Bolt in arnt to bad. But still suck
Thanks for watching!!
How much the compress pressures please?
it takes between 75 and 100 ton press to remove and install the bushings.
I think the Truck neds a Wash the Rimms also 😳😬😮
Thanks for watching and commenting!!
👍👍👍👍👍👍👍👍
Thanks for watching!!
Naki siz hitck kentinize iki bayragiffa acmadan olmaz de
👍👍👍💯
Нифига не понял, а как тут подвеска работает? Где подушки, ресоры, пружины? Как она работает?
Эта подвеска для особо тяжёлых грузов, самосвал, лесовоз и.т.д
Как на телеге, позвоночник досвиданья
Porque que siempre hacen un trabajo no asean las piezas que arreglan montan todo nuevo en cima del mugre ...buen trabajo pero con mugre que tristeza hacer videos
Totalmente de acuerdo ☝️ amigo disculpe como se llama ese tipo de suspensión y si se le puede adaptar a cualquier truck estoy armando un r 600 Mack y quiero ver cuál me sale más rentable si la de resorte o este modelo digo cuál aguanta más trabajo y peso
Spray some wd40 on all the bolts before you undo them and it will save you so much hassle.
Thanks for watching
gotta be careful....looks like lotsa ways to get hurt
Ibo gelecek gelecek ooooooooooooooo1 para getirecek
Great work plz help people by displaying contact info u can get lots of business plzzz
Herr ondan 150bin milyon stück
i don't cleaner.I do not understand
Abi bu kaddar
Sunuda alaH
ArabaAutobil Geschlechter renovieren Einbrecher rein kwetchen takilin undsoweiter
We don't have to see every Bolt Off and on better to show a before and after.
Thanks for watching!!
$$$$?
200000000m
Tane alirim Klammer bagislan derim
Su ondan 47000 bin dane
Please
Kürt demeyin Mamma kürdülliy chipliy deyyiniz koreasstolz des bana
👏👏👏👏👏👏👏👑🏆🎖️😷👋🇧🇷
47000bin Stück düshün je gönderin
Evetilki
Evetilki
How much does this job run