How to Replace Rear Power Window Regulator 2007-2013 Acura MDX

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com trq.video/ia-1...
This video shows you how to replace a new window regulator on your 2007-2013 Acura MDX. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This repair was done on a 2008 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX
Tools you will need:
• Phillips Head Screwdriver trq.video/oaZN...
• Pocket Screwdriver
• 10mm Socket trq.video/oaKD...
• Trim Tool Set trq.video/oT7-...
• Ratchet trq.video/ober...
• Socket Extensions trq.video/oa2G...
• Painter's Tape
• Pick trq.video/oDI-...
Subscribe: / @trq
Check out our playlist:
Acura MDX 2nd Generation 2007-2013: • Acura MDX 2nd Generati...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@scottmiller6771]

Good video, I have a 2013 Acura RDX. Small problem is that one of my rear window regulators is broken with window in the up/closed position. How are you supposed to lower the window to remove the bolts that fasten the glass to the regulator 😮

[@R6soldier46]

How can I lower the window to remove the regulator if my switch is not working?

[@XHollisWood]

Great Tips 👍😊

[@Yolo-xj2qe]

Nice video, but my window is stuck in the closed position. Looks like I'll be having fun trying to remove those two bolts that hold the window.

[@sblagg527]

LOL "start with the window rolled all the way down." Well if you're replacing the regulator because it doesn't work, what are you supposed to do if the window is in the closed position,? Nice of this video to gloss RIGHT over that.

[@brandoninfranca2755]

I’m in that situation rn 😂

[@GreggMartin-cw7pw]

how do I diagnose it is the window actuator and not the switch with out taking the door off?

[@Eharmonicz]

I removed old plugged n put the new regulator and tested and it doesnt work.. is it a faulty part or did i miss a step? Is there any things i gotta remove or a switch on the new motor/ regulator or its just plug n play? Went to test the old one n it still moved the lines the old motor still worked replacing due to plastic part broke that keeps window along the track. Anyway old one still functioned new one didnt….. faulty part right?