If you could put a speaker and a sensor in there so it plays the song Only when the belly wheels are moving And it doesn't _restart_ but it _pauses_ when the rollers aren't spinning
That’s awesome dude, I need to stock up on spacers and bearings I have a bout 100 bearings but all 1/10 scales got to stock up for my 1/24 scale‘s but wow that’s super cool dude yeah I’m following 👍👍🤠
It depends how custom you wanna make it really. The fcx24 is definitely better out of the box and lots of aftermarket starting to hit for it. The electronics are better than the scx24 so if you don’t plan on changing them immediately I’d probably go fcx. The scx24 can compete if you put the fcx axles on it and eliminate the worm gears that limit it’s wheel speed. Or if you run 3s all the time the scx24 has close to the same wheel speed with a good setup. You can take an fcx out of the box and roll though and be much better than the scx24 imo
That 2FM chassis looks awesome! Is it Stainless? I like all the shock mount holes. Getting that skid mounted up is great. Worth loosing the catch point for the slight CoG raise. Pretty much looks like what I had in mind to cut out by hand.....ooohh, comes in scx24 as well as carbon fiber!!!! GIGGIDY!
Heck yeah dude take your time, that’s gonna be bad ass for sure love it. I’ll be watching this whole build can’t wait to see it furnished. But take your time it would be awesome
They are very good stock so unless you really wanna go full on custom I’d probably start with an rtr. Only issue with building from the ground up is you can’t purchase the shift link (small wire that connects the shifter to the servo) by itself so you have to make one. I’m in the works with fms to get that offered by itself. I’ve been bugging them for a wk now 😆. They said they are working on it
I’m excited to see how that works out for you! Was just crawling my fcx24 today & getting hung up on the skid on the break over. Would be awesome if that solves/help it any
Hi Matt love your content. Have you found any driveshaft that will work with these that do not have so much slop in them at the connection points. I was looking at the YH racing chassis on eBay. They look like they just have a grub screw that clamps down on the flat part. So it looks like that would take out a lot of play in the driveshaft. I have not got them yet
Thank you. You inspired me to put the fcx axles on my gladiator. I really love it. The injora driveshafts just have the one screw and it just has so much play. Also put rear stearing on it. When i get my sag dialed in i feel it will be a different maker.
Everytime I see this video pop up I got to watch it again just to kind of see the performance of this thing is so awesome
Look forward to seeing how this comes together. My lizard and komodo will be here friday but I'll have to wait for the chassis to be shipped.
They acted like they are gonna start shipping next Monday! Hopefully you won’t have to wait long
This is awesome man great thinking outside of the box
My chassis won't do that but it's will fly😹👍👏🤩 thanks for sharing 😊
Awesome idea!
Thanks!
we need rolling axles now
white and nerdey
Much more fitting. Lol
If you could put a speaker and a sensor in there so it plays the song
Only when the belly wheels are moving
And it doesn't _restart_ but it _pauses_ when the rollers aren't spinning
thoughts on how to go about modding the 6x6 Atlas to fit the FCX24 gearbox and motor?
That’s awesome dude, I need to stock up on spacers and bearings I have a bout 100 bearings but all 1/10 scales got to stock up for my 1/24 scale‘s but wow that’s super cool dude yeah I’m following 👍👍🤠
I made bumpers with bearings, work pretty good too!
about to order a frame. whats your recommendations
Looking to build another 24th scale would you recommend buying a fcx24 over a scx24 I already have a scx24 gladiator. thanks love your videos btw!!
It depends how custom you wanna make it really. The fcx24 is definitely better out of the box and lots of aftermarket starting to hit for it. The electronics are better than the scx24 so if you don’t plan on changing them immediately I’d probably go fcx. The scx24 can compete if you put the fcx axles on it and eliminate the worm gears that limit it’s wheel speed. Or if you run 3s all the time the scx24 has close to the same wheel speed with a good setup. You can take an fcx out of the box and roll though and be much better than the scx24 imo
Very nice!! Waiting on mine to arrive
Cool idea my dude! This could be a game changer! Where will the bottom links mount?🤷♂️
I got them covered 🤘
🤔🤔🤔 Would this work for the scx24 trans?
I’m sure it could be made to work!
WOW great idea!!
Are those bearings in the space where your links would normally attach?
Yep! I have a really good solution for the links coming next 🤘
Super cool. Innovation at its finest. Like you said not for everyone, but. Who know maybe it slays and has to go into production somewhere. 🤔👊
Good idea
That 2FM chassis looks awesome! Is it Stainless? I like all the shock mount holes. Getting that skid mounted up is great. Worth loosing the catch point for the slight CoG raise.
Pretty much looks like what I had in mind to cut out by hand.....ooohh, comes in scx24 as well as carbon fiber!!!! GIGGIDY!
It’s titanium. Definitely worth raising cog a bit to lose that nub that hangs on everything to me lol
@@2fmrc Well that makes it just extra cool and extra fun to drill extra holes in!!! 😳😁👍 Shame to cover it with a body!
Nice mod 😎👍
Heck yeah dude take your time, that’s gonna be bad ass for sure love it. I’ll be watching this whole build can’t wait to see it furnished. But take your time it would be awesome
I gotta get me a FCX 24 asap!!!
Would you rather get another rtr fcx24 or build a fcx24 from scratch ?
They are very good stock so unless you really wanna go full on custom I’d probably start with an rtr. Only issue with building from the ground up is you can’t purchase the shift link (small wire that connects the shifter to the servo) by itself so you have to make one. I’m in the works with fms to get that offered by itself. I’ve been bugging them for a wk now 😆. They said they are working on it
@@2fmrc thanks man! After seeing the chassis that’s available for it now! I gotta get me a Fcx24
As always great content! Excited to see what you do with this build. I’m sure it’s the best of the best for the 24 scale
Hell yea man definitely a game changer.....I have to get a fcx24 man....when i do I need that chassis....I'm gonna gwtvbro
Whats the plan for shocks? I'm building an ugly chassis with the fcx axles currently and not sure what shocks to use.
Do you have a link to the rod ends you used in the roller steering linkage video? Thanks
These here 🤘
amzn.to/3PqlC5j
Yep, thanks again
true ''rolling chassis'' lmao. pretty sick bro!
Hey I’ve never seen wheels and tires like that before what are they 🤣🤣🤣👍👍
Cool build Matt. This is why we watch this channel. Always improvising
Have you ever tried using delrin to make a skid plate? it slip slides over rocks and is a lot cheaper than all that.
top video matt.does someone make a front roller bumper?
So badass! Great idea. Looks super rad.
interested to see how you go about mounting lower links 👍👍
this is so freaking cool how did it end up working out?
So you are basically famous now?
I’m excited to see how that works out for you! Was just crawling my fcx24 today & getting hung up on the skid on the break over. Would be awesome if that solves/help it any
It feels like it’s gonna really help the bit I’ve ran it. Still working on the body for it so not much running yet. Can’t wait though!
Do they make one of these for the scx24??
that intro lol!
Very cool!
Thanks! Can’t wait to get it running
@@2fmrc Yeah, I’m excited to see the final results.
Brilliant
Big brain at it again!
10/10 intro
niceee
Hi Matt love your content. Have you found any driveshaft that will work with these that do not have so much slop in them at the connection points. I was looking at the YH racing chassis on eBay. They look like they just have a grub screw that clamps down on the flat part. So it looks like that would take out a lot of play in the driveshaft. I have not got them yet
Treal made some just for the fcx24 so I would assume they don’t have much play but they are stock length which kinda sucks
Thank you. You inspired me to put the fcx axles on my gladiator. I really love it. The injora driveshafts just have the one screw and it just has so much play. Also put rear stearing on it. When i get my sag dialed in i feel it will be a different maker.