I just bought a brand new DelTon, with the "slim" full length(15") hand guard, and the full length pica tinny rail. No hideous fixed front sight post made into the gas block. Forward assist, and dust cover. Aircraft aluminum upper and lower. I installed aluminum dual aperture flip up sights, and a 2 MOA red dot on it. I've got less then $550 in everything, and I LOVE IT!!!!! You don't have to spend a fortune to have a nice AR.
Great video! You're right about the addictive part. It was the same back in my Street rod and motorcycle days. All can be expensive, but I keep it in check. Thanks again.
Great builds. One operator recommendation - It isn’t advised to use the front of the mag well as your foregrip. I was doing it that way too, until I got trained up. Holding the rifle with so much of the barrel out in front of you makes it take longer to get it pointing in the direction you want, both from high/low guard and also after a shot(s) and muzzle lift...when getting your site picture back. Also, if someone other than you grabs the barrel while you’re holding the mag well you don’t have the leverage to throw them off, need leverage higher up on the barrel. Recommended to use the “C Clamp” grip farther up on the heat shield, or with an angled foregrip.
Why no more videos for 2 years? I miss your channel. And too funny, The NSZ85 AR15 built tutorial video is simply the best build video on youtube. I have used it so many times!
I was shocked when I saw you had a Ghost Skeletonized lower! I lived in Daytona for 4 years and picked the same one up from Holly Hill! I have about 1k rounds through mine with zero issues. I use mine as more of a precision rifle with a 20in heavy fluted barrel. Definitely not my 3 gun choice because I'm worried about a rock or something finding it's way inside the trigger housing. Significantly lighter though for sure! Loved the video and all of the different product reviews! Have a great day and stay safe guys!
My current build is based on a DPMS Oracle 5.56 like his friend's gun. I put the basic Magpul carbine foregrip and pistol grip on along with the MFT Minimalist shoulder stock, then a set of flip up sights with a gas block length front sight and standard rear sight, then I have a couple different optics. One is a UTG Bug Buster 1-4X32 and the other is a Pinty 1.5-4X30. Trying both out to see which I prefer. Overall, the build is under $700.00 and It's set up pretty nice.
Hey just found your channel, wanted to tell you I really like the way you demonstrated the upgrades themselves (visually), the "strategy"as for why you chose each piece as well as you're approach to talking noobs through the various terms and definitions etc... Great job bro, hope you keep this up. I'll check out your other vids. I also like the fact that you just say "hey I'm just a gun guy not a ninja/operator with 33 deployments to the devil's asshole... Well done
Should always start with the main parts. Barrel chamber, twist, profile, material and build process. Bolt type, material/coatings, testing (MPI, HPT). Gas system length (carbine, mid, rifle). Buffer system and weight. Upper/lower material and build process. Trigger single/double action, springs/pull weight, coatings, milspec or drop in. LPK quality. Have to start at the base for a good AR build. Then you can move onto the fun stuff like stocks, handguards, optics, lights, etc.
Your builds have a lot of thought into each weapons system and I see you tailored some of them for situations..!! Here comes the Butt Monkey..train with emphasis on improving your marksmanship..practice squeezing the trigger..and hold the trigger after weapon fires..then let up for the reset..!! Only time your trigger finger should come off the trigger is when your not engaging a target..!! This will make you a better marksman especially follow up shots..!! Good luck to you on all your endeavors..!!
Loved the video, only one criticism and it's minor. You said "Cantered Iron Sights" it's "Canted Iron Sights." Just for future reference, not tryna be a grammar nazi or anything. I just thought I'd share. You can also use "offset iron sights" and it means the same thing. Again, love the channel.
Very good selection.. I watch a lot of these vidoes since i just purchased the MP sport 2. I saw a lot and learned about some upgrades never seen before by myself so great job guys ill def b subbing thanks and God bless ..
That ACOG sadly looks a whole lot like the Chinese knock-offs. The real ones have the name physically on the side - not printed, they have cap cables to keep the turret caps connected, and they have a pin up front holding the fiber optic in place. If your buddy paid full price for that optic, he got swindled.
Just picked one up recently and this vedo was very helpful, thank you for all the insight really opened my mind in form of the how much you can do to theses babies.
i LOVE THE wmd guns NIB-X bcg . I first bought a brownells NIB BCG for a 16 in and later learned the regular NIB is not as slick as NIB-X .So A Heads up to Newbies. NIB = Nickle Boron.
That ACOG on your friends rifle is a knockoff! A real ACOG trademark is not printed in white on the housing. A genuine ACOG will have raised lettering that is part of the aluminum housing.
@@mountsj Trust me I do, in Afghanistan I I was on patrol and fell into some rocks on a mountain and my acog glass took the force of ALL of the impact and only knicked it. I want a ACOG more than anything!
@@FlatRangeOperator I'm confused then. In your first comment you say fuck an optic that cost that much and then praise the quality and say how much you want one.
That was a MOE stock, not a CTR. Critical parts for a quality self defense build are: Viltor mil spec lower receiver extension tube, bolt carrier group from BCM, detent pins from Colt or BCM, barrel from FN,, BCM or Faxon, after market trigger group from Geissele, American Gold, etc, and a quality gas block from Geissele, SLR, etc.I prefer the SCS from JP which eliminates the retainer stud for the recoil spring. Purchase the Magpule BEV Block, Armorer's Wrench , Geissele Reaction Block to get the 40 ft pound castle nut torque needed without canting the buffer tube. A set pf roll pin starter punches, AR-15 PIVOT PIN DETENT INSTALLATION TOOL, BROWNELLS - BOLT CATCH PIN PUNCH. Hand guards are available from many places, but my favorite are from SLR "solo", and Faxon carbon fiber. Pistol grips are the same, but my favorite is the Magpul moe. My favorite stock is the old, but still my favorite Magpul CTR. Be sure to get a quality safety lever and gas tube.Last is a quality vice.
Great video and just a suggestion when your trying to showcase a part like the grip dont use a black background. Makes it extremely hard to see anything.
You seem like a cool ass dude. Just started with my AR 15 (not build). Starting with a M&P15 and looking to customize. Hope you still doing videos. Because I’m about to check for you RMA....
1 to 4 with iron sight.. 2nd Choice is One to go with. on 4 magnified.. Fast Targeting is not fast as tiltin iron sight.. but Scope 4 times is..scouting.. Must have. Light with Huge lumen and troboscope.. at night you blind enemy. And mostly night time is Danger time..
11:47 ~ Really liking your buddy Mike's AR build. Though with an actual ACOG on there, doubtful there'll be too many clones of his build, based on this video.
Cud you include a parts list (including prices) with links to? Also, if you cud add maybe instructions for what equipment is best to compliment each other. (Trying to get my wife to let me build her an AR-15 so your expert advice would help. Thanks
Hi Can you have a full list breakdown of parts used for your pistol built AR. I'm really interested on this build and would like to have a build exactly as yours. Thanks in advance.
Anderson yeah I got one too, it is nice so far and I like the RF-85 treated parts which is everything on the rifle although it isn't very tight at 100 yds so far and I want to change that to make this rifle a tack driver or as tight as its ever gonna be. I like the trigger but I know it could be better than this stock make but it really doesn't feel that bad. I keep 3 extra batteries for my Leopold Red dot so I never am without power for battery related issues. Vortex are awesome optics for me so far, I like them and you don't have to go broke putting good glass on your weapons.
Can you send me ALL the info on your "Rifle Build"? I have been looking on what to do with my Andersen lower I have (1st one!) ... and I was thinking .223 Wylde 18" fluted barrel for looks ... for coyote ... i LOVE the side iron sights - gotta have that backup! GREAT ideas ... but I'm sticking to more budget, for now, rifle for doing what I am doing to do with it ... so that rifle one stuck out in this vid!!
Here In Canada we aren't allowed to own a handgun or Ar-15 unless you have a Restricted licence. which i only have a non-restricted ,So i went for the BCL 102 or the Stag 10 which are non-restricted due to them being based upon the Ar-102 originally and for some reason that is not scary..lol
There the best guns in the world because you built it or them...dont be modest......own your shit...to you those are the best ar15s in the world...NICE RIFLES
Addictive ??? Hell yeah!!! But go for it anyway, I have rifles/ AR's hidden all through the house...ready to go in case they're needed on a possible SHTF day. The wife doesn't even know where but hey ….gives me more room in my rifle safe :) My home is like a rifle ninja home.....Hunting anyone??
Great videos. I do have the addiction. Please do me a favor and put a different color background when filming the 360 shots. Black + black background = squinting
In the dramatic cinematic display of your cheap budget build; you know, the one with the expensive receiver, you have your hammer spring installed backwards, and it appears to be resting on top of the trigger pin. It will work like that for a little bit, but hopefully you noticed light primer strikes or had someone else tell you, and you have since fixed it. Bloopers roll.
That’s not really true. My geisselle trigger literally has grooves for the hammer spring to sit on the trigger pin. Its literally in the instructions It’s not supposed to be below it... that would cause less spring tension and could lead to light strikes
going from bolt to AR for coyote hunting with most distances under 250 yds. The quick second and third shot is very important, as is accuracy. So, i want a suppressor, the range, reliability, etc. etc. and most of this is overwhelming for a beginner. ??????
I've noticed that a .223 wylde jumps more than a standard 5.56 chamber using the same ammo, (.223 Fiochi 55 grain). 16 inch 5.56 vs 18 inch .223 wylde. Not sure if I'm getting more pressure out of the chamber grind or more pressure out of the extra barrel length. I was under the impression that the. 223 Fiocchi burn was pretty complete with a 16 inch barrel.
My LR 308. weighs in at Twelve and a half pounds lol You heard me right! It's got a lot of stuff on it ok, lol and it's a BCL 102 with the original Gen 2 handguard which is heavy as a cinder block.
@@brendanakers7294 not legal ours are pinned to five rounds. but you can get certain pistol mags that work and then the limit is 10 rounds. Yeah Canada is pussy land. lol
Guns are great why not do some nice builds to make us all happy. I want to get an AR-15 that will lay it down on the range to keep some tight groups as I used to in the army many years ago.
Definitely cant get into the new scope fad with the front bell removed. An Aimpoint Pro is nice. Acogs with the mini red dot RMR on top is super cool. A full size scope with a red dot on top is cool, too. All old school obsolete.
My ar I built cost 59.99 stripped lower 65.00 for lower build ki 15.00 for buffer tube &stock kit 6.00 firing pin 69.99 carrier group 19.99 ambidextrous charging handle 199.99 upper 16" minus carrier group firing pin charging handle Keynes rail system 25.00 flip up iron sights 10.99 Canted picatinny rail x3 60.00 multiple mags 59.99 ambidextrous magazine release troy 25.00 ambidextrous safety switch Total cost I don't care its custom to my prefrance as a left handed shooter
Follow a couple ar 15 builders groups on Facebook. Go to tactical toolbox channel. He has some building videos and has lists with his videos. He's the first I recommend to anybody
I would recommend not using any polymer or plastic mags because they break faster as soon as you drop them they are done for I've done had a couple pmags mess up in the same spot top back of it splits open us metal mags and they will last longer guaranteed P.S.A has metal mags for around 10$ a pop cheaper and more reliable and guaranteed to last longer
@@alextaylor2145 ; If you consider that all forged receivers are made in 4 or 5 forges and if they are machined to spec. there can't be much difference between them , other than looks . Think of them as nothing more than fixtures that hold parts in a specific location . The heart of the rifle is the barrel and BCG and to a lesser degree the trigger . Your PSA lower is good to go .
Red Dot Need Huge pereferal.. And trust me having Exrtra add on clip on that is 4 times adde zoom that can be removed from clip on orspringed on side.. Will Help you find target.. Shoting is all about fijnding target first.. And AR wit no magnifier.. Is for 30 meters spoting.. you want to see if it is part of leg or head 50 m and shoting that is not smart.. So Prfect buuld Need Light Eotech. with 4 tims On ar.. 10 inc plus.. Or use gun with long barel Bater for cqb under 50 m.. ANd Speed is crucial..
I need help. I am new to guns and I was hoping to get a rifle for $600 under. My idea is a Scout rifle or Assault im not sure which would be better to shoot for. 30.06 or 308. Im not sure which bullet for Assault not .22 and i need to keep in mind the cheaper the bullet the better. Im looking for semi auto no bolt action with a mag. Keep in mind I live in california if that makes a difference. Thank you for all your help and suggestions.
I just purchased the Franklin CA12 boltaction repeater in 350 legend. Would I be able to take the lower and put a Semiautomatic upper in the same caliber? Just a hypothetical question.
i'd love to see a "review" on pistol combinations alone. i'm a newbie and i wanna build up several options to my pistol lowers. i would love to see a review of red dot viewers, side-angle iron sights, and forward hand grips... all that shit. just a full on review on pistol builds. lemma know when you, if you, complete one. cheers.
Im a newbie to the gun world and this was very helpful, thank you
I just bought a brand new DelTon, with the "slim" full length(15") hand guard, and the full length pica tinny rail. No hideous fixed front sight post made into the gas block. Forward assist, and dust cover. Aircraft aluminum upper and lower. I installed aluminum dual aperture flip up sights, and a 2 MOA red dot on it. I've got less then $550 in everything, and I LOVE IT!!!!! You don't have to spend a fortune to have a nice AR.
NSZ85's videos are a great resource for those who are new to the AR platform, or building their first AR.
i'm brand new to this whole building thing. This vid helped me feel less overwhelmed. Great viddy, thanks.
so nice that they make a compartment in the handle for skittles and beef jerky
A parts list for each build would great to have.
Low-key mesmerized by the camera work
Great video! You're right about the addictive part. It was the same back in my Street rod and motorcycle days. All can be expensive, but I keep it in check.
Thanks again.
I love my fail zero BCG. Good video man. I don't know why so many people are leaving stupid comments . Probably a ego/jealousy issue
Great builds. One operator recommendation - It isn’t advised to use the front of the mag well as your foregrip. I was doing it that way too, until I got trained up. Holding the rifle with so much of the barrel out in front of you makes it take longer to get it pointing in the direction you want, both from high/low guard and also after a shot(s) and muzzle lift...when getting your site picture back. Also, if someone other than you grabs the barrel while you’re holding the mag well you don’t have the leverage to throw them off, need leverage higher up on the barrel. Recommended to use the “C Clamp” grip farther up on the heat shield, or with an angled foregrip.
I'm just getting into AR guns, and this video is very helpful.
Thank you
Nsz85 walked me through my first build as well! And yes it is very addictive lol.
Why no more videos for 2 years? I miss your channel. And too funny, The NSZ85 AR15 built tutorial video is simply the best build video on youtube. I have used it so many times!
I was shocked when I saw you had a Ghost Skeletonized lower! I lived in Daytona for 4 years and picked the same one up from Holly Hill! I have about 1k rounds through mine with zero issues. I use mine as more of a precision rifle with a 20in heavy fluted barrel. Definitely not my 3 gun choice because I'm worried about a rock or something finding it's way inside the trigger housing. Significantly lighter though for sure! Loved the video and all of the different product reviews! Have a great day and stay safe guys!
Right very addictive, I’m on my second one and already thinking 🤔 on my 3 rd one
Dang man! Solid camera work! Well done, you'll hit 1M subs in no time
My current build is based on a DPMS Oracle 5.56 like his friend's gun. I put the basic Magpul carbine foregrip and pistol grip on along with the MFT Minimalist shoulder stock, then a set of flip up sights with a gas block length front sight and standard rear sight, then I have a couple different optics. One is a UTG Bug Buster 1-4X32 and the other is a Pinty 1.5-4X30. Trying both out to see which I prefer.
Overall, the build is under $700.00 and It's set up pretty nice.
addictive is the word, and when you're not working on it, you are researching the next part or build.
So true
Agreed!
you know me so well
iIm sitting here lmbo because I'm researching my next part watching a video from 3 yrs ago
max headroom same 😂😂😂😂
Hey just found your channel, wanted to tell you I really like the way you demonstrated the upgrades themselves (visually), the "strategy"as for why you chose each piece as well as you're approach to talking noobs through the various terms and definitions etc... Great job bro, hope you keep this up. I'll check out your other vids. I also like the fact that you just say "hey I'm just a gun guy not a ninja/operator with 33 deployments to the devil's asshole... Well done
Should always start with the main parts. Barrel chamber, twist, profile, material and build process. Bolt type, material/coatings, testing (MPI, HPT). Gas system length (carbine, mid, rifle). Buffer system and weight. Upper/lower material and build process. Trigger single/double action, springs/pull weight, coatings, milspec or drop in. LPK quality. Have to start at the base for a good AR build. Then you can move onto the fun stuff like stocks, handguards, optics, lights, etc.
Really like the way you did your video. Im surprised it doesnt have more views. Good job and keep making videos
Your builds have a lot of thought into each weapons system and I see you tailored some of them for situations..!! Here comes the Butt Monkey..train with emphasis on improving your marksmanship..practice squeezing the trigger..and hold the trigger after weapon fires..then let up for the reset..!! Only time your trigger finger should come off the trigger is when your not engaging a target..!! This will make you a better marksman especially follow up shots..!! Good luck to you on all your endeavors..!!
Loved the video, only one criticism and it's minor. You said "Cantered Iron Sights" it's "Canted Iron Sights." Just for future reference, not tryna be a grammar nazi or anything. I just thought I'd share. You can also use "offset iron sights" and it means the same thing. Again, love the channel.
I too just saw your video and I really like your build videos!
Very good selection.. I watch a lot of these vidoes since i just purchased the MP sport 2. I saw a lot and learned about some upgrades never seen before by myself so great job guys ill def b subbing thanks and God bless ..
That ACOG sadly looks a whole lot like the Chinese knock-offs. The real ones have the name physically on the side - not printed, they have cap cables to keep the turret caps connected, and they have a pin up front holding the fiber optic in place. If your buddy paid full price for that optic, he got swindled.
Oooooooo the gold and white! I’m in love!
Just picked one up recently and this vedo was very helpful, thank you for all the insight really opened my mind in form of the how much you can do to theses babies.
The use of a adjustable stock allows varying length of pull, which can change based on what the shooter is wearing not just the size of the shooter.
i LOVE THE wmd guns NIB-X bcg . I first bought a brownells NIB BCG for a 16 in and later learned the regular NIB is not as slick as NIB-X .So A Heads up to Newbies. NIB = Nickle Boron.
That ACOG on your friends rifle is a knockoff! A real ACOG trademark is not printed in white on the housing. A genuine ACOG will have raised lettering that is part of the aluminum housing.
an ACOG costs like 1 thousand dollars sooo fuck an optic that costs as much as an already modded rifle is so ridiculous
Jesse Roth - lol you get what you pay for friend. $1k isn’t crazy for a high end optic some dudes run optics $2-4k
@@FlatRangeOperator you obviously don't understand quality
@@mountsj Trust me I do, in Afghanistan I I was on patrol and fell into some rocks on a mountain and my acog glass took the force of ALL of the impact and only knicked it. I want a ACOG more than anything!
@@FlatRangeOperator I'm confused then. In your first comment you say fuck an optic that cost that much and then praise the quality and say how much you want one.
That was a MOE stock, not a CTR. Critical parts for a quality self defense build are: Viltor mil spec lower receiver extension tube, bolt carrier group from BCM, detent pins from Colt or BCM, barrel from FN,, BCM or Faxon, after market trigger group from Geissele, American Gold, etc, and a quality gas block from Geissele, SLR, etc.I prefer the SCS from JP which eliminates the retainer stud for the recoil spring. Purchase the Magpule BEV Block, Armorer's Wrench , Geissele Reaction Block to get the 40 ft pound castle nut torque needed without canting the buffer tube. A set pf roll pin starter punches, AR-15 PIVOT PIN DETENT INSTALLATION TOOL, BROWNELLS - BOLT CATCH PIN PUNCH. Hand guards are available from many places, but my favorite are from SLR "solo", and Faxon carbon fiber. Pistol grips are the same, but my favorite is the Magpul moe. My favorite stock is the old, but still my favorite Magpul CTR. Be sure to get a quality safety lever and gas tube.Last is a quality vice.
Great video and just a suggestion when your trying to showcase a part like the grip dont use a black background. Makes it extremely hard to see anything.
agreed and I didn't watch it all but there was a part you were talking about charging handle but showing different footage
Very well done. Love them all!
21:45 is where pistol build info starts.
Lol ur right it is addictive to build a new one I want to start a 50 Beowulf build even tho i already just got done buildin a 300 aac blk
Really enjoyed it. Likey your 308 version
Would you put a list of suppliers for some of the accessories, please. I will try to find them, but links help me get them and support your channel.
man what a great video, ty!
Holy shit. I thought I was American until I heard about storing beef jerky in my rifle. How could I have not thought of that sooner?!
I built my ar for 500 with the optic. Too many customization options couldn’t decide so I’m gonna wait until I make up my mind.
Kyle Garcia I’m looking to build mine. Who would you recommend??
Commodore McCrary Id recommend PSA, Aero, or BCA.
you should put links for all of the sights ect..
You seem like a cool ass dude. Just started with my AR 15 (not build). Starting with a M&P15 and looking to customize. Hope you still doing videos. Because I’m about to check for you RMA....
1 to 4 with iron sight.. 2nd Choice is One to go with. on 4 magnified.. Fast Targeting is not fast as tiltin iron sight.. but Scope 4 times is..scouting.. Must have. Light with Huge lumen and troboscope.. at night you blind enemy. And mostly night time is Danger time..
11:47 ~ Really liking your buddy Mike's AR build. Though with an actual ACOG on there, doubtful there'll be too many clones of his build, based on this video.
I've spent over $2500.00 on my BCL LR-308 because of all the cool choices to add on to the rifle lol
Cool video, I like the different range of AR's as well!
Great video, thank you.
Cud you include a parts list (including prices) with links to? Also, if you cud add maybe instructions for what equipment is best to compliment each other. (Trying to get my wife to let me build her an AR-15 so your expert advice would help. Thanks
Hi
Can you have a full list breakdown of parts used for your pistol built AR. I'm really interested on this build and would like to have a build exactly as yours. Thanks in advance.
Anderson yeah I got one too, it is nice so far and I like the RF-85 treated parts which is everything on the rifle although it isn't very tight at 100 yds so far and I want to change that to make this rifle a tack driver or as tight as its ever gonna be. I like the trigger but I know it could be better than this stock make but it really doesn't feel that bad. I keep 3 extra batteries for my Leopold Red dot so I never am without power for battery related issues. Vortex are awesome optics for me so far, I like them and you don't have to go broke putting good glass on your weapons.
Can you send me ALL the info on your "Rifle Build"? I have been looking on what to do with my Andersen lower I have (1st one!) ... and I was thinking .223 Wylde 18" fluted barrel for looks ... for coyote ... i LOVE the side iron sights - gotta have that backup!
GREAT ideas ... but I'm sticking to more budget, for now, rifle for doing what I am doing to do with it ... so that rifle one stuck out in this vid!!
1/9 twist for a long range accurate AR? Anyways Good collection.
Well done video the production is really good.
Lmao... "Addictive" you're Not kidding!
I'm working on #6
...
Built my forst one 2 years ago I'm on #4 now lol
Just starting out , great info . Thank you . Awesome videos .
Just built my first AR15 I am looking forward for my next build
Really great videography in this video
Can you list the parts that went into your 1st build?
Here In Canada we aren't allowed to own a handgun or Ar-15 unless you have a Restricted licence. which i only have a non-restricted ,So i went for the BCL 102 or the Stag 10 which are non-restricted due to them being based upon the Ar-102 originally and for some reason that is not scary..lol
There the best guns in the world because you built it or them...dont be modest......own your shit...to you those are the best ar15s in the world...NICE RIFLES
The skelatinized AR looks awmazing. If it shoots as good as it looks itll be hard to top that one. 👍
Yeah nut there not good for real shtf or combat all kinds of gunk can get it just a range toy
Awesome video. I found too many parts that I want
eed to buy hahaha :D
Excellent vid! On Target! 🎯
Addictive ??? Hell yeah!!! But go for it anyway, I have rifles/ AR's hidden all through the house...ready to go in case they're needed on a possible SHTF day. The wife doesn't even know where but hey ….gives me more room in my rifle safe :) My home is like a rifle ninja home.....Hunting anyone??
At some point you'll realize you can transfer your bipod from one rifle to another in order to sight it in.
I wish the rotating profile pictures were not filmed with a black background. It makes it hard to see the gun.
Holy smokes, you definitely don't have kids. Way to own a subject. Impressed!
Heavy barrel at 16-18 inches, Franklin armory binary trigger, gives around 1600 bucks for a rifle + barrel + trigger for an insanely fast plinker
Did I miss something? Did I miss the part where you reviewed slings? Great video, very informative for the beginner.
Great videos. I do have the addiction. Please do me a favor and put a different color background when filming the 360 shots.
Black + black background = squinting
Awesome video thank you. Another great teacher for AR's is Kotaboy32
In the dramatic cinematic display of your cheap budget build; you know, the one with the expensive receiver, you have your hammer spring installed backwards, and it appears to be resting on top of the trigger pin. It will work like that for a little bit, but hopefully you noticed light primer strikes or had someone else tell you, and you have since fixed it. Bloopers roll.
That’s not really true. My geisselle trigger literally has grooves for the hammer spring to sit on the trigger pin. Its literally in the instructions It’s not supposed to be below it... that would cause less spring tension and could lead to light strikes
going from bolt to AR for coyote hunting with most distances under 250 yds. The quick second and third shot is very important, as is accuracy. So, i want a suppressor, the range, reliability, etc. etc. and most of this is overwhelming for a beginner. ??????
I've noticed that a .223 wylde jumps more than a standard 5.56 chamber using the same ammo, (.223 Fiochi 55 grain). 16 inch 5.56 vs 18 inch .223 wylde. Not sure if I'm getting more pressure out of the chamber grind or more pressure out of the extra barrel length. I was under the impression that the. 223 Fiocchi burn was pretty complete with a 16 inch barrel.
My LR 308. weighs in at Twelve and a half pounds lol You heard me right! It's got a lot of stuff on it ok, lol and it's a BCL 102 with the original Gen 2 handguard which is heavy as a cinder block.
That AR 9mm is sick...
And in Canada the mags are around $35.00 a piece. the Lancer runs around $65.00 and some 30 round Lancers are around $85.00
Mr McDonald you can get 30 round mags in Canada
@@brendanakers7294 not legal ours are pinned to five rounds. but you can get certain pistol mags that work and then the limit is 10 rounds. Yeah Canada is pussy land. lol
dude as soon as I saw that charging handle took me 3 seconds to find the website and start the buying process
Not sure about the SS lasting longer
Marginally better accuracy, tho after time it will lose that even. Bc it will not disapait heat as well as CMV
Guns are great why not do some nice builds to make us all happy. I want to get an AR-15 that will lay it down on the range to keep some tight groups as I used to in the army many years ago.
Definitely cant get into the new scope fad with the front bell removed. An Aimpoint Pro is nice. Acogs with the mini red dot RMR on top is super cool. A full size scope with a red dot on top is cool, too. All old school obsolete.
Awesome video and gun builds!!!
Careful with the FMK lower. I got a couple for free. One started to crack after like 200 rounds! Trashed it. Won’t trust the second at all.
Great video. How about the Rugger AR-15 556.
Great video
My ar I built cost
59.99 stripped lower
65.00 for lower build ki
15.00 for buffer tube &stock kit
6.00 firing pin
69.99 carrier group
19.99 ambidextrous charging handle
199.99 upper 16" minus carrier group firing pin charging handle Keynes rail system
25.00 flip up iron sights
10.99 Canted picatinny rail x3
60.00 multiple mags
59.99 ambidextrous magazine release troy
25.00 ambidextrous safety switch
Total cost I don't care its custom to my prefrance as a left handed shooter
Great job guys👍🏽
One update bolt carrier group came with a firing pin so yeah
.
Where did you get most of the parts
Parts list would be very helpful for the first AR pistol I’m a first time builder
Follow a couple ar 15 builders groups on Facebook. Go to tactical toolbox channel. He has some building videos and has lists with his videos. He's the first I recommend to anybody
You are well prepared If a war ever breaks out to your backyard.
Do you have matching Barbie & Ken dolls for each of your builds? Oh, la-la!
Dude can I get a link or parts list to that 9mm setup ? So sick
I would recommend not using any polymer or plastic mags because they break faster as soon as you drop them they are done for I've done had a couple pmags mess up in the same spot top back of it splits open us metal mags and they will last longer guaranteed P.S.A has metal mags for around 10$ a pop cheaper and more reliable and guaranteed to last longer
First lower was a PSA? Any thoughts on their stuff
They are good to go if you are on a budget. They may not be as good as a bcm but for the price you pay and the quality you get they are really good.
My thoughts exactly, went up to PSA and picked on up. No problems yet, ran 500 rounds or so through it so far so i reckon she's just breaking in lol
Alex Taylor hopefully it works well for you. I built 2 of their rifles and both have around 500 rounds with tulammo and have never failed me yet.
@@alextaylor2145 ; If you consider that all forged receivers are made in 4 or 5 forges and if they are machined to spec. there can't be much difference between them , other than looks . Think of them as nothing more than fixtures that hold parts in a specific location . The heart of the rifle is the barrel and BCG and to a lesser degree the trigger . Your PSA lower is good to go .
Red Dot Need Huge pereferal.. And trust me having Exrtra add on clip on that is 4 times adde zoom that can be removed from clip on orspringed on side.. Will Help you find target.. Shoting is all about fijnding target first.. And AR wit no magnifier.. Is for 30 meters spoting.. you want to see if it is part of leg or head 50 m and shoting that is not smart.. So Prfect buuld Need Light Eotech. with 4 tims On ar.. 10 inc plus.. Or use gun with long barel Bater for cqb under 50 m.. ANd Speed is crucial..
Damn nice camera work
I need help. I am new to guns and I was hoping to get a rifle for $600 under. My idea is a Scout rifle or Assault im not sure which would be better to shoot for. 30.06 or 308. Im not sure which bullet for Assault not .22 and i need to keep in mind the cheaper the bullet the better. Im looking for semi auto no bolt action with a mag. Keep in mind I live in california if that makes a difference. Thank you for all your help and suggestions.
Try rock river 2 stage trigger. Great trigger at a Great price.
Or a Geissele trigger
So many options! It's a bit overwhelming.
I just purchased the Franklin CA12 boltaction repeater in 350 legend. Would I be able to take the lower and put a Semiautomatic upper in the same caliber? Just a hypothetical question.
i'd love to see a "review" on pistol combinations alone. i'm a newbie and i wanna build up several options to my pistol lowers. i would love to see a review of red dot viewers, side-angle iron sights, and forward hand grips... all that shit. just a full on review on pistol builds. lemma know when you, if you, complete one. cheers.